Philips Code Needed

[lucian007]

Your code +++++ 4843 +++++ :devil:

Can someone tell me the instruction for entering the code, or a link to manual of philips 22 dc711/78?

[Rocky]

Can someone tell me the instruction for entering the code, or a link to manual of philips 22 dc711/78?

You try here:
404 Not Found :devil:

[lucian007]

Thx Rocky now it works. You are the best!!!

[brughy]

hi, i have a philips car radio 400, and i don't have a code!
Here is the numbers:


NO: 90532621
2F3
WA039838
and two bar codes:
003 9838 2062851
9022 213 9675203

Please Help!

[brughy]

Serial: Gm0400w2062851

[L0max]

Help need CODE FOR PHILIPS BETAV 902221589711/VWZ622X1309683...thanks in advance

[qqimmo]

Hi
I need help with code for this car radio

PHLIPS
NO.13105646
TYP/ CCRT2008(8) UZ2

Serial number / GM020821239782
In advanced thanks
Regards

[Rocky]

Hi
I need help with code for this car radio

PHLIPS
NO.13105646
TYP/ CCRT2008(8) UZ2

Serial number / GM020821239782
In advanced thanks
Regards

Sorry ..:frown2:.. Main Dealer or Radio Decoding Service only for this code.

[Jamesie]

Hi I have a Philips ccr600 : serial number GM 90 383 441 : NO: 09 114 584 : On the back of the front panel, 1614439Philips GM90506173 >PA6 GF15<

[_Franky_]

please post the 14 digit serial no. from the side of the radio casing, like GM0600--------

Hi I have a Philips ccr600 : serial number GM 90 383 441 : NO: 09 114 584 : On the back of the front panel, 1614439Philips GM90506173 >PA6 GF15<

[Jamesie]

please post the 14 digit serial no. from the side of the radio casing, like GM0600--------

sorry its, GM0600W 1101017

[_Franky_]

try . . . . 5739 . . . .

sorry its, GM0600W 1101017

[Jamesie]

Im having problems getting to enter the code now, Last night it was working, I held the AS button while turning it on and there was a beep, now when i do it the "7 CODE" comes up but no beep. Do you know why this has started happening?

[hay88]

Im having problems getting to enter the code now, Last night it was working, I held the AS button while turning it on and there was a beep, now when i do it the "7 CODE" comes up but no beep. Do you know why this has started happening?

Please note that code entry is only possible with the ignition switched on, and in the order shown below. If the display shows a number less than 10, and the word SAFE, then the unit may be codelocked. If this is the case, leave it switched on for up to two hours and a further attempt at code entry should be possible.

[Jamesie]

Went to Vauxhall earlier and told me exact same thing, Code worked and all is working, cant thank you all enough.