Blaupunkt Radio cant enter code

[Goncalves]

I have problem entering code as suggested pressing 1 for 1st,2for 2nd & so on then tune up^ but getting "wait 1Hr".
Serial no:BP2346 3199 9500 and part no:7642 346 318
Thank you for your support.

Hi,

Try Code ..... 5579

[micravs]

problem entering code

Remove it from the car for 30 minute.s..Reconnect ..then leave it SWITCHED ON ...UNDISTURBED for as long as it takes to reset itself.

The important thing is to leave it UNDISTURBED. If you touch it , then the waiting timing starts again

Make sure you have the correct code.

If not sure, quote ALL the LETTERS+NUMBERS on ANY LABELS , BARCODES or STAMPED IN THE METAL CASING

I have problem entering code as suggested pressing 1 for 1st,2for 2nd & so on then tune up^ but getting "wait 1Hr".
Serial no:BP2346 3199 9500 and part no:7642 346 318
Thank you for your support.

[marczesko11]

Thank you

Friends Thank you very much for your help.
Radio works.

[RegWorts]

thank you very much for the code.

I display wheat 1h.
What should I do?

sorry for my poor English.

read the last answer above from masterskay62

Leave the radio SWITCHED ON ...UNDISTURBED for as long as it takes to automatically reset This can take as long as an hour or even longer

[marczesko11]

I have a problem

thank you very much for the code.

I display wheat 1h.
What should I do?

sorry for my poor English.

[masterskay62]

HELLO
I have written by 3 TIMES BAD CODE AND RADIO IS LOCKED, now radio wants a code
can anyone nice help me ?
I have the code off the side of the radio.
Please help me, if you can.

BP217420692203
7642174310
BLAUPUNKT ALICANTE CD 32

thanks.

Leave the radio SWITCHED ON ...UNDISTURBED for as long as it takes to automatically reset This can take as long as an hour or even longer

[Sowi]

HELLO
I have written by 3 TIMES BAD CODE AND RADIO IS LOCKED, now radio wants a code
can anyone nice help me ?
I have the code off the side of the radio.
Please help me, if you can.

BP217420692203
7642174310
BLAUPUNKT ALICANTE CD 32

thanks.

Code 3735

@++

[Dekster]

HELLO
I have written by 3 TIMES BAD CODE AND RADIO IS LOCKED, now radio wants a code
can anyone nice help me ?
I have the code off the side of the radio.
Please help me, if you can.

BP217420692203
7642174310
BLAUPUNKT ALICANTE CD 32

thanks.

code is: 3735

[marczesko11]

radio code

HELLO
I have written by 3 TIMES BAD CODE AND RADIO IS LOCKED, now radio wants a code
can anyone nice help me ?
I have the code off the side of the radio.
Please help me, if you can.

BP217420692203
7642174310
BLAUPUNKT ALICANTE CD 32

thanks.

[therealgismo]

code is: 6652

Thank you very much indeed, the code worked a treat. :biggrin5:

very fast responce to my post,
you are a credit to this community. :thumbsup:

Thanks again Dekster

[Dekster]

hello there i recently blew the fuse in my van ..:confused5:
I replaced it now the radio wants a code
can anyone nice help me out?
I have the code off the side of the radio.

BP037347035725

& a 10 digit code...

8631122621

code is: 6652

[therealgismo]

could anyone help pls

hello there i recently blew the fuse in my van ..:confused5:
I replaced it now the radio wants a code
can anyone nice help me out?
I have the code off the side of the radio.

BP037347035725

& a 10 digit code...

8631122621

[RegWorts]

My radio just stays on WAIT i diconected it for half an hour then connected it back butt still the same thing just stays on wait

Re-read the previous reply as this has already been answerd

To reset from WAIT leave SWITCHED ON...UNDISTURBED for as long as it takes to automatically reset itself
This may take an hour or longer

[vladikkhvostik]

My radio just stays on WAIT i diconected it for half an hour then connected it back butt still the same thing just stays on wait

[hay88]

so if my code is 3142 how do i enter?

press 1 x3 times?
press 2 x1 time?
press 3x4 times?
press 4x 2 times?


thanks

Please note that code entry is only possible when the display shows "CodE". If the display shows anything else then it may be codelocked. If this is the case, leave it switched on for up to two hours and a further attempt at code entry should be possible.

just push 3142 Code Entry as Follows:
Switch Radio On - Display Shows
" CODE " then " - - - - "
Enter CODE in the order it is read - eg:
, To Enter Code 3142
Press Preset 3 then 1 then 4 then 2
The Code will Enter Itself Automatically