Renault clio radio code

[Dekster]

Could anyone tell me the code for my cd player in my clio
Model No: 22DC239/62
TOF629
RN239F20010854
PROD NO: FD0002050010854
Thank you

Try code 3559

[[email protected]]

Could anyone tell me the code for my cd player in my clio
Model No: 22DC239/62
TOF629
RN239F20010854
PROD NO: FD0002050010854
Thank you

[Sowi]

Last time, after 2 days, I or L are then revealed to be wrong, the correct letter was J...:yikes:

this is normal

[Sowi]

Last time, after 2 days, I or L are then revealed to be wrong, the correct letter was J...:yikes:

Code 6795 ..... you are blond ?

@++

[GRock]

You should put a picture of the radio label dr :biggrinjester:

@++

Last time, after 2 days, I or L are then revealed to be wrong, the correct letter was J...:yikes:

[Sowi]

We'll the code is not correct so what would the could be if my barcode finishes in L641

You should put a picture of the radio label dr :biggrinjester:

@++

[masterskay62]

We'll the code is not correct so what would the could be if my barcode finishes in L641

2799......................

[CLIO99]

I641 or i641 ( same ) => Code 0198 :willy_nilly:


@++

We'll the code is not correct so what would the could be if my barcode finishes in L641

[CLIO99]

Code is 0198

Instructions

0198 is the incorrect code

[Sowi]

Sorry my bad, barcode ends in I641

I641 or i641 ( same ) => Code 0198 :willy_nilly:


@++

[GRock]

Sorry my bad, barcode ends in I641

Code is 0198

Instructions

[masterskay62]

wrong code!

Leave the radio SWITCHED ON ...UNDISTURBED for as long as it takes to automatically reset This can take as long as an hour or even longer

Code Entry as Follows:

Switch Radio On - Display Shows
" CODE "
Press " ¬ " On The Stalk Control To Enter
" 0000 "
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
If the correct code number is now shown
Press And Hold " ¬ " Until A Beep Is Heard

[CLIO99]

1641 = this is One letter and three numbers . ( example : i641 , z641 , q641 , ....... )

[ATTACH=CONFIG]4241[/ATTACH]

@++

Sorry my bad, barcode ends in I641

[Sowi]

7700 433 060 1641 is my barcode
And all other details is in previous messages so what is my code?

1641 = this is One letter and three numbers . ( example : i641 , z641 , q641 , ....... )



@++

[CLIO99]

Wrong ...... Barcode : 770 433 070 '1641

[ATTACH=CONFIG]4240[/ATTACH]

@++

7700 433 060 1641 is my barcode
And all other details is in previous messages so what is my code?