Fiat AD 182 H Code problem

[Monkeylover]

Oh well

Thank-you for your efforts RegWorts. I am curious when you say there's no code available on the internet. Do you get your codes from another website or do you have some software?

[RegWorts]

Thank-you for your efforts RegWorts. I am curious when you say there's no code available on the internet. Do you get your codes from another website or do you have some software?

No , I do not obtain any codes from another website.

If I can not provide a code , then I do know several other sources who may have a larger database than my collection who are prepared to give out a code for free (In such cases , I normally refer any enquiry directly to them )


For my codes , I use a collection of software acquired over the past few years (including purchased commercial software) plus a knowledge of how to manually calculate some codes ....I also have accrued knowledge/experience of knowing what codes are normally avalable for free on the Internet and the ones that are not.

Not all makes of radio allow their codes to be worked out from the Serial Number.

....and some are NOT calculated but use a database software ( eg. PHILIPS + GRUNDIG )

If a code is not available from anywhere using the Serial Number, then the radio will have to be taken to a decode specialist to open up + read +recode the memory chip (EEPROM)....which can be quite expensive.


So whereas you will see FORD+ most BLAUPUNKT codes readily available from many forums, you will also discover that PHILIPS + GRUNDIG are not quite so available for free .......and DELCO + most CLARION are NOT available from anywhere for free

Unfortunately , I think your Fiat / Grundig will be one of the ones NOT available for free.

Let me know if I`m wrong !

:thumbsup:

[numbkev]

hello reg i'm kevin i have a fiat bravo with a grundig AD182H2 head unit had to remove the battery to fit a new starter motor and lost the code for my stereo serial no:FA1092X1864618. Theres is another number which is 735249778 i would be most happy if you could supply a code for me as my ears are starting to bleed having to listen to myself humming and singing i think i'm tone deaf and its a really horrible noise thx (kev).

[RegWorts]

hello reg i'm kevin i have a fiat bravo with a grundig AD182H2 head unit had to remove the battery to fit a new starter motor and lost the code for my stereo serial no:FA1092X1864618. Theres is another number which is 735249778 i would be most happy if you could supply a code for me as my ears are starting to bleed having to listen to myself humming and singing i think i'm tone deaf and its a really horrible noise thx (kev).

Sorry ...not in my GRUNDIG database

Main Dealer, Decode Specialist or you local Car Radio / Audio Shop

[thugusher]

hi! i need fiat radio code for my car
Type AD182H 9.18279-81 G.HE-64 00
No- 7796721
serial no. FA0925V2736187

[RegWorts]

hi! i need fiat radio code for my car
Type AD182H 9.18279-81 G.HE-64 00
No- 7796721
serial no. FA0925V2736187

Your code is 0023

[danidj]

Lost code

I've lost my code as well, so please help me somebody asap.

Type: AD 182 H2

FA1092X1350265

[RegWorts]

I've lost my code as well, so please help me somebody asap.

Type: AD 182 H2

FA1092X1350265

Sorry...not in my GRUNDIG database and I do not think it will be available for free from anywhere on the internet

Main Dealer or Decoding Service only.

[claudinho]

grundig ad182 h

hello!!
i have a grundig ad182 h (FA0925T1573231)
can anyone help me to unlock it?
tell me how i should do,step by step please (i'm not from england) and i don't have a user manual for the radio! i tried to unlock myself,but i couldn't!,it appeared M2 next to the clock on the screen and i don't know what that means!!
help me please!
Thank you very much!!

[claudinho]

i could fix the clock! that means the radio is unlocked? i can't do anything else!and if i press the ON button,the clock is stoping to work! when i press ON and then i press TP it doesn't appear SAFE on the display! can someone help me please?

[RegWorts]

hello!!
i have a grundig ad182 h (FA0925T1573231)
can anyone help me to unlock it?
tell me how i should do,step by step please (i'm not from england) and i don't have a user manual for the radio! i tried to unlock myself,but i couldn't!,it appeared M2 next to the clock on the screen and i don't know what that means!!
help me please!
Thank you very much!!

Your code is 1206

The Code Entry Instructions are


Grundig AD182H Fiat Code Entry

After switching on the set will display 'SAFE' followed by ' .. .. .. .. '.

Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the fourth digit

To save the code press the ' TP 'button .
The display will briefly show 'SAFE'.

The set will now operate.

[claudinho]

i pressed TP and it doesn't appear SAFE!! do you have any ideea what's wrong?
the clock is working perfect and i could fix the hour and the minute of it! when i press ON button the clock stops working but it's still on the display and any other button i press doesn't work! should i press a button longer? if someone has any ideea please help me!! TNX

[claudinho]

please look at this video and tell me if you know what i should do

[media]

[/media]

[vinicimus]

Grundig

Hi guys, i had yesterday changed clutch in my fiat brava and uffortunately radio asking for code it is in safe mode, it is
AD182H2
FA1092X1838879
Thanks

[RegWorts]

Hi guys, i had yesterday changed clutch in my fiat brava and uffortunately radio asking for code it is in safe mode, it is
AD182H2
FA1092X1838879
Thanks

Sorry...not in my GRUNDIG database ....and I don`t think it will be obtainable for free from anywhere on the Internet

Main Fiat dealer or a Decoding service only