Blaupunkt 250 CD sbo5

[maxicosi]

Hello,

I'm looking for the code and cancheck procedure for my BP 250 CD sbo5 (from a Fiat mobilhome.
I installed a new radio in the mobilhome and want to use the BP in my wife's car. Can anyone help me?

[maxicosi]

sorry, forgot to give the serial number of the unit
BP number 7646322316
also a user's manual would be great.

Addition:
correct number:
815BP632298382848

[Goncalves]

Please, enter the full serial number Exemple; BP6322 12345678

[maxicosi]

full serial number:

815 BP 6322 98382848

[Goncalves]

sorry, forgot to give the serial number of the unit
BP number 7646322316
also a user's manual would be great.

Addition:
correct number:
815BP632298382848

Hi,
TRY
IMMO + CODE .... 2211

Fiat 250CD SB05
Blaupunkt 7 646 322 316

Fiat Ducato

If the display continually shows "WAIT" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible.

Code Entry as Follows:

Switch Radio On - Display Shows
" CODE " then " - - - - "
Enter CODE in the order it is read:
For Example, To Enter Code 1234
Press Preset 1 then 2 then 3 then 4
The Code will Enter Itself Automatically

CANCHECK

This stereo is electronically paired to the engine management system of the vehicle it came out of using very sophisticated CAN-BUS system technology. When it is first powered up, it will communicate with the vehicle, and a message of "WAIT" will appear whilst this process is in operation. If communication has been successfull, it will prompt for the code number to be entered. However, if removed and refitted into a different vehicle other than the original one, it will not recognise the coded CANBUS signals of the new car, and will instead display an error message of "CANCHECK".

[maxicosi]

Thanks.

small problem:
The radio shows "cancheck" instead of "code"
I think he wants to mate with a can-bus system, but it isn't there. How do I override it?

[Goncalves]

Thanks.

small problem:
The radio shows "cancheck" instead of "code"
I think he wants to mate with a can-bus system, but it isn't there. How do I override it?

You have all the explanations on the Thread ..

[maxicosi]

Call me stupid, call me blind, sorry but I don't see it.
Can I do it myself?

[RegWorts]

Call me stupid, call me blind, sorry but I don't see it.
Can I do it myself?

No....A job for a Radio Decoding Service or your Main Dealer



CANCHECK

This stereo is electronically paired to the engine management system of the vehicle it came out of using very sophisticated CAN-BUS system technology. When it is first powered up, it will communicate with the vehicle, and a message of "WAIT" will appear whilst this process is in operation. If communication has been successfull, it will prompt for the code number to be entered.

However, if removed and refitted into a different vehicle other than the original one, it will not recognise the coded CANBUS signals of the new car, and will instead display an error message of "CANCHECK".