code for my radio Philips 22 DC722/65

[langi]

Hi all,

need a code for my radio Philips 22 DC722/65 (406 coupe)
battery went dead, now i dont have music in my car. I receved a code from Peugeot based on the prod.Nr of the car, but it don't works

numbers on the radio:
22DC722/65

PHAPCFW9083214


thank you in advance,

regards, Ben

[Sowi]

Hi all,

need a code for my radio Philips 22 DC722/65 (406 coupe)
battery went dead, now i dont have music in my car. I receved a code from Peugeot based on the prod.Nr of the car, but it don't works

numbers on the radio:
22DC722/65

PHAPCFW9083214


thank you in advance,

regards, Ben

hi

Code 0595

@++

[langi]

thanks

Hi

thanks, it was to code, i received from Peugeot, but it dont works

What to do now? any Idea?

Ben

[langi]

Program the code

I tried it again, no success

process:
select the digit with the button "1"
select the number with the arrows
code 0595 programmed
to finish I push the button "1" again (by other buttons no reaction)

message from radio "err code"

I disconnected it from battery and tried again, again the same

I have no idea, what make I wrong, or what is the problem

If samebody knows, please write it

thanks
Ben

[Goncalves]

I tried it again, no success

process:
select the digit with the button "1"
select the number with the arrows
code 0595 programmed
to finish I push the button "1" again (by other buttons no reaction)

message from radio "err code"

I disconnected it from battery and tried again, again the same

I have no idea, what make I wrong, or what is the problem

If samebody knows, please write it

thanks
Ben

Please note that code entry is only possible when "CODE" is shown in the display. If the unit is codelocked it will need to be left switched on up for up to two hours to reset before another code entry attempt is possible.

Code Entry as Follows:

Switch Radio On - Display Shows "CODE"
Press Preset " 1 " and the display will show
" 0 - - - "
Press Tuning Up Button " > " For Correct Digit
Press Preset " 1 " to Enter
Press Tuning Up Button " > " For Correct Digit
Press Preset " 1 " to Enter
Press Tuning Up Button " > " For Correct Digit
Press Preset " 1 " to Enter
Press Tuning Up Button " > " For Correct Digit
If the correct code number is now shown
Press Preset " 1 " to Enter

[langi]

no success

Thanks for the detailed specification, I did it exactly so.
At list 50 times in the last 2 weeks
It is always the same reaction "err code"

[RegWorts]

Thanks for the detailed specification, I did it exactly so.
At list 50 times in the last 2 weeks
It is always the same reaction "err code"

Then it looks as though your radio has been recoded to another number

It will have to be taken into a Radio Decoding Service to be decoded