Phillips renault 6010 unlock code missing help please

[tessysdad]

Hi I wonder if you could help I need a unlock code for a 6010 on a laguna the numbers on the unit are as follows
Prod: Fd1199282001090
Model: 22dc461/72en
Rn461fx2001090
7700 433 074 e433
902221461722
2001090
Thanks in advance

[masterskay62]

Hi I wonder if you could help I need a unlock code for a 6010 on a laguna the numbers on the unit are as follows
Prod: Fd1199282001090
Model: 22dc461/72en
Rn461fx2001090
7700 433 074 e433
902221461722
2001090
Thanks in advance

Try code 3993

[tessysdad]

Try code 3993

Hi
Thanks for that. Tried it no good will try again in case I entered it wrong.

[masterskay62]

Hi
Thanks for that. Tried it no good will try again in case I entered it wrong.

PHILIPS RENAULT CODE ENTRY INSTRUCTIONS

FOR CARS WITH A STEERING WHEEL REMOTE CONTROL
Note :If you don`t have the [¬ ] button then push the thumbwheel in and some will have an [ A¬ ] button
Turn on the radio and the display will show 'CODE' then 0000
Use the Steering Wheel Remote Controls for code entry.Press the [¬] button then rotate the thumb wheel for the correct first digit
Press the [¬] button then rotate the thumb wheel for the correct second digit
Press the [¬] button then rotate the thumb wheel for the correct third digit
Press the [¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [¬] button for up to 10 seconds to store the code
IF THERE IS NO STEERING WHEEL CONTROL , THEN USE THE PRESET BUTTONS ON THE RADIO
Press the First Preset Button repeatedly for the 1st digit to be displayed
Press the Second Preset Button repeatedly for the 2nd digit to be displayed
Press the Third Preset Button repeatedly for 3rd digit to be displayed
Press the Fourth Preset Button repeatedly for 4th digit to be displayed
Then press and HOLD Preset button 6 for 10 seconds to store your code
(Note :Some radios use Preset Button 5 to store the code )

[tessysdad]

Thanks for your help. Entered it exactly as instructed to no avail. Short of any further suggestions I am starting to think there's a fault on the unit.

[RegWorts]

Thanks for your help. Entered it exactly as instructed to no avail. Short of any further suggestions I am starting to think there's a fault on the unit.

IMPORTANT: Make sure you press the final button that stores the code
( ¬ 5 or 6) for at least 10 seconds

[tessysdad]

Hi thanks for the help. Held the button in as instructed. To no avail just bleeps and returns to code display.