Octoplus JTAG v.1.8.2 - LG E960, F200x USB repair and more!

[GSM KING MAKER]

Octoplus JTAG Software v.1.8.2 is out!

We have added boot repair via USB and small TP for LG E960, F200K, F200L, F200S, F200LS
and via JTAG for Samsung GT-B5512 and LG F200L.

Octoplus Box JTAG Software v.1.8.2 Release Notes

• Added support for the following models:

- LG E960 - added Dead Boot / Device Repair via USB
- LG F200K - added Dead Boot Repair via USB
- LG F200L - added Dead Boot Repair via USB / JTAG
- LG F200LS - added Dead Boot Repair via USB
- LG F200S - added Dead Boot Repair via USB
- Samsung GT-B5512 - added Dead Boot / Device Repair via JTAG

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.2

Find out more at: www.octoplusbox.com