Announcement

Collapse
No announcement yet.

Chinese Miracle-2 MTK/MediaTek v1.17 - Alcatel, HTC and new extra features

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Chinese Miracle-2 MTK/MediaTek v1.17 - Alcatel, HTC and new extra features

    Infinity-Box Chinese Miracle-2 MTK/MediaTek v1.17 released - Alcatel, HTC and new extra features

    MediaTek SP Platform

    - MTK Flash Engine:
    1. Flashing with "Flash Erase" and "Repartition" work now like "Download Only" mode
    2. Some other improvements
    CPU supported now for Factory FW flashing: MT6571, MT6572, MT6582, MT8127, eMMC only

    - SP Unlock operations improved
    HTC 310 (Read Codes)
    HTC 616 (Read Codes)
    HTC 620G (Read Codes)
    Alcatel 5038 (Direct Unlock)
    Alcatel P310 (Direct Unlock)
    MT6589 "SP Code Read" and "Direct unlock" revised
    MT6571/MT6572 NAND supported for "Read Codes"
    ADB/Root is not required

    - Factory FW reading improved
    HTC and Alcatel specific improvements

    - Service operations improved:
    HTC 310 support (SP Unlock / Read/Write Dump / Format FS / Read PatternLock) - HTC 310 model should be selected !
    New Feature: Alcatel ProInfo Tool: Read ProInfo, Write ProInfo, Edit ProInfo
    * Support for ProInfo write: Binary and Infinity format files
    New Feature: Flash Erase - for expert use only !
    * Support MT6571, MT6572, MT6582, MT6589, MT8127, only eMMC supported
    New Feature: Fix Unknown BaseBand - for expert use only !
    * Support MT6571, MT6572, MT6582, MT6589, NAND/eMMC supported
    New Feature: Init Preloader - for expert use only !
    * Support MT6571, MT6572, MT6582, MT8127, MT6589, only eMMC supported

    MediaTek FP Platform

    - MTK 652A/MT6260/MT6261 Read User Code activated (Reset option still exist)
    Read one and correct user code and it state (active or not)
    - MTK 652A/MT6260/MT6261 Read "Privacy Lock" and "Mobile Tracker" codes activated
    Read one and correct PL or MobileTrack code (or both if set)

    MediaTek All

    - Other
    FlashUpdate Package updated to latest (v1512/2015)
    FullFlash Read/Write revised for MT6572/MT6589
    MT6589 Support revised, FlashInit activated
    Secure Boot phones (MT6582, MT6589) support revised
    Improved CompileInfo extraction
    Security Repair improved
    Bugfixes and improvements



    Download here: Infinity-Box - Support



    Infinity-Box 10 (ten) years (2005 - 2015) non-stop regular updates and support as nobody else: Infinity-Box - News

    New features, Unlock Codes (Huawei, Motorola, Samsung etc.), iPhone Unlock, Software Activations released for Infinity-Box Online Service

    - World biggest flash files database for several thousands brands/models
    - BB5 Easy Service Tool [BEST] Dongle
    - CDMA-Tool Dongle (fast and easy unlock)
    - Extract phonebook (and other content) from alive and dead phone
    - Follow us on Twitter
    - Facebook
    Tags: None
  • #2
    Karbonn A240 Fix Unknown BaseBand By Infinity CM2 In 25 Sec

    Dear Friends,

    No Need To Find Factory Firmware Or Same Version Firmware Or Write Full Dump Or Write NVRAM Or Format Or Root Or Many Other Solutions.

    Just Click On "Fix Unknown BaseBand" Then Connect The Cellphone & Get The Unbelievable Result.


    Screenshot Of Unknown BaseBand Before Repair.




    Operation : Fix Unknown BaseBand [ v1.17 ]
    User accepted FixBB operation!

    Code:
    1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 170 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35585A4D420122A1CADC1155
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D420122A1CADC1155
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Step #1
Step #1 ... Ok
Step #2
Step #2 ... Ok
Reset Done!

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!

    Screenshot Of BaseBand Version After Repair.

    Comment

    • #3
      Karbonn A6 Turbo MT6571 eMMC Read Factory Firmware/NVRAM Supported.


      Operation : Check / Read Info [ v1.17 ]

      Code:
      1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 170 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040507A2D0DEC129
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040507A2D0DEC129
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Karbonn
ProdName  : A6 Turbo
ProdModel : A6 Turbo
Device    : A6 Turbo
AndroidVer: 4.4.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.KK1.MP7.V1

Done!
Elapsed: 00:00:32
Reconnect Power/Cable!



      Operation : Read Flash [ v1.17 ]

      Code:
      1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 170 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040507A2D0DEC129
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040507A2D0DEC129
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : Karbonn
ProdName  : A6 Turbo
ProdModel : A6 Turbo
Device    : A6 Turbo
AndroidVer: 4.4.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_vsun71_e_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6571 / V1.1.1 / vsun71_e_kk / EMMC
FW Size : 805 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6571__Karbonn__A6 Turbo__A6 Turbo__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00:03:51
Reconnect Power/Cable!



      Operation : Read NVRAM [ v1.17 ]

      Code:
      1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 170 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040507A2D0DEC129
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040507A2D0DEC129
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Read Ok, MT6571_eMMC.spnv saved

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

      Comment

      • #4
        Swipe Konnect 4E Version V2 Read Full Flash, NVRAM, Pattern Lock, Done.


        Operation : Check / Read Info [ v1.17 ]

        Code:
        1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 170 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 009800BC009000660076001600080000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

NAND : Detecting structure now... Please, wait.
NAND : Structure detect done [31]

[AP] : Initial info read Ok!

Done!
Elapsed: 00:01:00
Reconnect Power/Cable!



        Operation : Read Flash [ v1.17 ]

        Code:
        1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 170 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 009800BC009000660076001600080000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Read Ok , collect info
MTKxCPU   : MT6571
MTKxPRJ   : hongyu71_cwet_71_lca
Saved to : C:\InfinityBox\CM2MTK\Flash\MT6571__hongyu71_cwet_71_lca.ispff

Done!
Elapsed: 00:04:26
Reconnect Power/Cable!



        Operation : Read NVRAM [ v1.17 ]

        Code:
        1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 170 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 009800BC009000660076001600080000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Read Ok, MT6571_NAND.spnv saved

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!



        Operation : Read PatternLock [ v1.17 ]

        Code:
        1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 170 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 009800BC009000660076001600080000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ... 
Reading data ...  Please, wait
Checking ... 
PatternLock not set

Done!
Elapsed: 00:01:49
Reconnect Power/Cable!

        Comment

        Previous template Next
        Working...
        X

        We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

        By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

        I Agree