Announcement

Collapse
No announcement yet.

Medusa Box v.2.4.9 is out!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Medusa Box v.2.4.9 is out!

    Medusa Box v.2.4.9 is out!

    We have added boot repair via USB and small TP for LG G3 D851, G2 Mini LTE-A D620, LG D620K, LG D620R
    and via JTAG for ViewSonic ViewPad 7 (VS13761).


    Medusa Box v.2.4.9 Release Notes:
    - Added support for the following models:
    • LG D851 - added Dead Boot / Device Repair via USB
    • LG D620 - added Dead Boot Repair via USB
    • LG D620K - added Dead Boot Repair via USB
    • LG D620R - added Dead Boot Repair via USB
    • ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)


    - Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair mentioned above devices via USB, please follow the three next steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)



    Medusa - Ultimate Breakthrough in the Phone Repair!


    Download Medusa Box v.2.4.9


Working...
X