24 hours Ambulance services for mobiles in DRAGON MOBILE HOSPITAL

[dicle_gsm]

MTK Android ""Return Data Error !!!"" Solution Here..




If you receive this error message

Used GPGDragon Main Cable D+ D- (pinfind)

1- Run GPGDragon Exe
2- Checkbox
3- Tick Scan pinout
4- Choise USB
5- Click Start

And Enjoy The GPGDragon Box

BR,


Dicle_Gsm

[dicle_gsm]

How to Remove Pattern Lock of Android MTK device (NOT ANDROID SPD) without USB Debugging and without Loosing User Data with Battery and Normal Cable


If your device not connected in ADB Mode, that mean your device "USB DEBUTTING" is OFF. So, you can not connect your device in ADB Mode. For this you have some idea or trick.


1. Connect your Switch OFF Android Device (Mobile) with Normal USB Cable and Battery (Do Not USE Modified Cable)





Now, If you see in the "Device manager" You can see like above picture because the DEVICE "USB DEBUGGINE" is OFF.

2. Now, Open Dragon Software in MTK Tab
3. Now, choose "Write IMEI"
4. Tick "Android IMEI"
5. Choose "USB" (Not Com port)
6. Now, Click on "Start"
7. Wait.....Now, you can see the IMEI of the Device on the Dragon Main Screen / Output Screen.





8. This means, Device is connected in ATE Mode now. And now, device also connects in ADB interface.
(To confirm this, Check the "Device Manager" of you computer. You can see "Device Name ie Samsung Android Phone" in first row and "Android Composite ADB Interface" in the second row.)







9. Now, go to Dragon "Android" Tab (Do not disconnect device from the computer. Let it be connected.)
10. Choose "Clear Pattern Lock by ADB"
11. Click "Start"





12. Wait until you see "All Done" in the Dragon Software Main Screen.
13. Now, Device will Restart.
14. Now, you can draw any kind of Pattern you like. Your device will open.
15. Enjoy!!!



Note: This method only works "Android MTK Devices", Not for "Android SPD Devices". And this method only not for Chinese Devices but Also Original Devices that is available in the Market. )

[dicle_gsm]

How To use 4 REGULAR jIG For MTK SPD RDA COOLSAND

For Daily Info About These jigs
This Is tooo old but Mostly Users Not know this
So Team Decide To Make Easy For Dragon Users
daily many users again and again
use wrong way of these jig
and post again and again
you can set these as manul pinout for coolsand rda
then your file readed ok and working 100%
P-05B
]"]ImageShack - Best place for all of your image hosting and image sharing needs
Every One Know This jig
But Not know how to use right way
of this ji
This jig is for MTK SPD MSTAR COOLSAND
AND Many Others Brands
also pinout same
this jig have 5 pin
USB
1:- VCC CH
2:- D- DM
3:- D+ DP
4:- EMPTY
5:- GND
RX TX
1:- VCC
2:- RX
3:- TX
4:- Empty
5:- GND

P-10C

]"]ImageShack - Best place for all of your image hosting and image sharing needs

this jig is
For MTK SPD MSTAR COOLSAND RDA
ZTE HUAWIE AND MANY OTHERS BRANDS
BUT WE POST ABOUT COOLSAND PINOUT
D-=8
D+=6
RX 7
TX 9
RXD 3
TXD 4


P-12C

]"]ImageShack - Best place for all of your image hosting and image sharing needs

IN THIS JIG
FOR RDA COOLSAND
RX 6
TX 7

For SPD
D+:9
D-:8

Universal JIG

]"]ImageShack - Best place for all of your image hosting and image sharing needs


NOT only for RX or TX
u can use Uni jig for
USB
as
D+ D-
DP DM




BR
Gsm.Universal