Announcement

Collapse
No announcement yet.

INFO: eMMC ADAPTER (Direct Connection)

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • INFO: eMMC ADAPTER (Direct Connection)

    Hi,

    New Feature in ATF 10.20 is an option in ATF Plus --> eMMC Tool 2.0 that allows you to READ/WRITE eMMC Chips that are not connected to the Phone's PCB.

    Here is an example of such setup. My Taiwan Made "no soldering" emmc socket programming Cherry Mobile S100 eMMC and Samsung S3 and Note2 eMMC.





    *Samsung S3 eMMC Inside Socket




    Here is the eMMC detected in the ATF Software. This is a BLANK BRAND NEW EMMC so as you can see, boot partitions and boot mode is not yet defined.




    As you can see from the pictures, you don't need to build or buy voltage regulators. Proper programming voltage is already generated by the ATF Box! So all you need are wires and some generic eMMC Socket which you can buy in taobao...

    Here are some examples:

    Good Quality (250 U$D)

    emmc socket_ÌÔ±¦ËÑË÷


    Not So Good Quality (65 U$D)
    eMMC169 153²âÊÔ×ù ÀÏ»¯×ùOTʽ£¬´ø²âÊ԰壬¼æÈݸ÷Öֳߴç-ÌÔ±¦Íø


    No Return No Exchange (40 U$D)
    ¶«ÕðEMMC ¼«ËÙÐÞשÒÇÆ÷º¸½Ó+²ð×Ö¿â±à³Ì(Åä¼þEMMC sokcet)-ÌÔ±¦Íø


    Or you can just solder wires directly to the eMMC Chip Like This:

    (PICTURE COURTESY OF lalitjsraks)






    For ATF Nitro, you need some small modification to give Power to eMMC socket via RJ-45 PIN 2 (the pin beside VBATT PIN 1). Needless to say, if you modify your Nitro Box, you will loose warranty. So just decide for yourself if you need to modify or you want to buy external power supply instead. Anyway, here is modification needed, just look at light blue encircled area... you will see a very thin wire connected to PIN 2 of RJ-45.



    For ATF Big Chrome Box (Modified or Normal PCB), you do not need any modifications. RJ-45 PIN 2 is already connected to an Adjustable voltage output.


    B.R.
    As you get older you will understand more and more that it's not about what you look like or what you own, it's all about the person you've become.

  • #2
    good job
    thanks

    Comment


    • #3
      Pinout:

      pin 2 - 1,8/2.8/3,3v VDD (by wire at Box)
      pin 5 - cmd
      pin 6 - clk
      pin 7 - gnd
      pin 8 - data0

      pin 1 - from 5v to 2,8/3,3v DC/DC converter (external) - VDDF

      Data0 to VDD - 15-51kOm reststor
      CMD to VDD - 10-15kOm reststor

      Comment


      • #4
        where i get this adapter

        Comment


        • #5
          useful information
          thanks

          Comment


          • #6
            Connecting to the Updates Server...ERROR
            ERROR: Couldn't connect to the Updates Server. Try again later. solution100000% tested
            c/window/sestem32/dirver/etc/host
            host folder delet 100 ok 15.10.2014

            Comment


            • #7
              good infos

              very good infos...

              Comment


              • #8
                good job.
                thanks.

                Comment


                • #9
                  good job tankssssssssssss

                  Comment


                  • #10
                    Always only example but not work

                    Comment


                    • #11
                      good job
                      thanks

                      Comment

                      Working...
                      X