Problem after the update to 4.4.2 what to do?

[gafary123]

hiiiiiii

Problem after the update to 4.4.2 what to do?
Phone became not work in this case
As shown in the attached image

20141026_235917.jpg

I've work Software by Odin does not work
Please help me what should I do?

[gafary123]

10 Show no replies
I think there is no solution
Where software experts

[Ripgsm]

10 Show no replies
I think there is no solution
Where software experts

If you not explain Clear what have done anybody can help you.

Write wich Fw version had first of Flash, write which vers. have flashed, explain clear also Odin log if have.
These device can Brick easy with Downgrade but can be repaired more easy only with an boot card, but this isn't you case.
Explain all clear if want help.

[JUSuper]

If you not explain Clear what have done anybody can help you.

Write wich Fw version had first of Flash, write which vers. have flashed, explain clear also Odin log if have.
These device can Brick easy with Downgrade but can be repaired more easy only with an boot card, but this isn't you case.
Explain all clear if want help.

this will do bro
just remember to use the right ROM and dont attempt to downgrade.
there is some issues people tried and then hardbricked their phone.

try this :

How to Install KitKat-compatible TWRP Recovery on Galaxy Grand 2

1. On your computer install Odin and the TWRP recovery file (you can get it from here); also don’t forget to install the Galaxy Grand 2 USB drivers.
2. Unzip Odin on desktop and install the program by following the on screen prompts.
3. Unzip the custom recovery image and place the resulted file on desktop, or on the same folder as Odin.
4. Run Odin on your computer.
5. Enter your Galaxy Grand 2 in download mode; in order to do so, first turn off your device and then press and hold power, volume down and home buttons at the same time.
6. Connect your smartphone with your computer via USB cord.
7. Odin will establish a connection with your Grand 2 – the “added” message will be displayed and the ID:COM section will turn yellow or blue – if not, you should try to reinstall the drivers on your computer; then repeat the steps from above until everything works as explained.
8. From Odin now select the “PA” option and pick the TWRP recovery file.
9. Click on “start” and don’t make any other changes on the program – just wait while the flashing process is completed.
10. In the end, on Odin the “pass” message will be displayed and the ID:COM section will turn green.
11. Unplug the USB cord and reboot your phone.

Note: if after completing the steps from above, your Grand 2 gets stuck in a boot loop, enter recovery mode on your Android device. From recovery select “wipe data factory reset” and “wipe cache partition”. In the end, from main menu of recovery choose “reboot system now”.
Note 2: if during the flashing process, Odin gets stuck, you need to: close the program and unplug the USB cable; reinstall the drivers on your computer; force restart your Grand 2; repeat the steps from above and retry to install the custom recovery image.

source: android . gs

[gafary123]

If you not explain Clear what have done anybody can help you.

Write wich Fw version had first of Flash, write which vers. have flashed, explain clear also Odin log if have.
These device can Brick easy with Downgrade but can be repaired more easy only with an boot card, but this isn't you case.
Explain all clear if want help.

In fact, I do not know what is the version that was the phone but all I know it's 4.3 Jelly bean
But I've downloaded G7102XXUBNH4_G7102OXEBNH2_SER
Did not succeed and also G7102XXUBNH5_G7102OJVBNH1_AFG
The problem still exists

[gafary123]

this will do bro
just remember to use the right ROM and dont attempt to downgrade.
there is some issues people tried and then hardbricked their phone.

try this :

How to Install KitKat-compatible TWRP Recovery on Galaxy Grand 2

1. On your computer install Odin and the TWRP recovery file (you can get it from here); also don’t forget to install the Galaxy Grand 2 USB drivers.
2. Unzip Odin on desktop and install the program by following the on screen prompts.
3. Unzip the custom recovery image and place the resulted file on desktop, or on the same folder as Odin.
4. Run Odin on your computer.
5. Enter your Galaxy Grand 2 in download mode; in order to do so, first turn off your device and then press and hold power, volume down and home buttons at the same time.
6. Connect your smartphone with your computer via USB cord.
7. Odin will establish a connection with your Grand 2 – the “added” message will be displayed and the ID:COM section will turn yellow or blue – if not, you should try to reinstall the drivers on your computer; then repeat the steps from above until everything works as explained.
8. From Odin now select the “PA” option and pick the TWRP recovery file.
9. Click on “start” and don’t make any other changes on the program – just wait while the flashing process is completed.
10. In the end, on Odin the “pass” message will be displayed and the ID:COM section will turn green.
11. Unplug the USB cord and reboot your phone.

Note: if after completing the steps from above, your Grand 2 gets stuck in a boot loop, enter recovery mode on your Android device. From recovery select “wipe data factory reset” and “wipe cache partition”. In the end, from main menu of recovery choose “reboot system now”.
Note 2: if during the flashing process, Odin gets stuck, you need to: close the program and unplug the USB cable; reinstall the drivers on your computer; force restart your Grand 2; repeat the steps from above and retry to install the custom recovery image.

Thank you for answering my friend
But the problem is still the same
Unfortunately, the phone does not enter into recovery mode



It is on this case does not change
This same image

[JUSuper]

Thank you for answering my friend
But the problem is still the same
Unfortunately, the phone does not enter into recovery mode



It is on this case does not change
This same image

sorry to hear that bro

let's wait some masters show up

[Ripgsm]

I continue not understand you.
This device is BRICKED or only stopped how in this photo?

If is only stopped here, try with one Easy Wipe/Factory Reset.
If not goes in Recovery, post here FULL OPEN of what Show in "Device Manager", after return to talk about repair.

[gafary123]

I continue not understand you.
This device is BRICKED or only stopped how in this photo?

If is only stopped here, try with one Easy Wipe/Factory Reset.
If not goes in Recovery, post here FULL OPEN of what Show in "Device Manager", after return to talk about repair.

Phone after the update became as the picture
ohone inter download mode and acept new firmware but not goin up only
Galaxy Grand 2 G7102 and dont inter recovery mode

[Ripgsm]

Phone after the update became as the picture
ohone inter download mode and acept new firmware but not goin up only
Galaxy Grand 2 G7102 and dont inter recovery mode

@gafary123,

please use Google translator becouse not understand you language.

If i understand good, phone goes in D.Mode but no in Recovery Mode.

OK, try to find BL +PIT of SAME FW Version that have now, flash this 2 with odin 3.09 i think you'll solve this small issue.

First of Flash, post Here, Fw that you have now, BL + Pit that want flash.
Post LOG, have request screen of "Device Manager" open with phone connected and not have posted, are days that ask Log of odin but you continue posting only this photo, if not understand is impossible help you.

[gafary123]

@gafary123,

please use Google translator becouse not understand you language.

If i understand good, phone goes in D.Mode but no in Recovery Mode.

OK, try to find BL +PIT of SAME FW Version that have now, flash this 2 with odin 3.09 i think you'll solve this small issue.

First of Flash, post Here, Fw that you have now, BL + Pit that want flash.
Post LOG, have request screen of "Device Manager" open with phone connected and not have posted, are days that ask Log of odin but you continue posting only this photo, if not understand is impossible help you.

Now phone can enter in odin mode
so i update phone by single package file G7102XXUBNH5_G7102OJVBNH1_XSG using pit.
After that now phone stopped Recovery Booting
when i power on samsung name blink twice.
and stop on samsung galaxy grand2

[Ripgsm]

I have writer of flash One package +PIT or another thing?

Loock:

BL +PIT of SAME FW Version that have now, flash this 2 with odin 3.09

So, NO one package Fw but YES only BL/AP +PIT of this "G7102XXUBNH5_G7102OJVBNH1_XSG", you know what's BL .tar File? if no search with google, in forum where you want but NOT flash one package Fw, these phone can repair only seeing, are very easy of repair just listen what i have said.

[gafary123]

I have writer of flash One package +PIT or another thing?

Loock:

So, NO one package Fw but YES only BL/AP +PIT of this "G7102XXUBNH5_G7102OJVBNH1_XSG", you know what's BL .tar File? if no search with google, in forum where you want but NOT flash one package Fw, these phone can repair only seeing, are very easy of repair just listen what i have said.

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G7102XXUANE2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G7102XXUANE2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/051> Added!!
<ID:0/051> Odin v.3 engine (ID:51)..
<ID:0/051> File analysis..
<ID:0/051> SetupConnection..
<ID:0/051> Initialzation..
<ID:0/051> Set PIT file..
<ID:0/051> DO NOT TURN OFF TARGET!!
<ID:0/051> Get PIT for mapping..
<ID:0/051> Firmware update start..
<ID:0/051> SingleDownload.
<ID:0/051> aboot.mbn
<ID:0/051> NAND Write Start!!
<ID:0/051> FAIL! (Auth)
<ID:0/051>
<ID:0/051> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[Ripgsm]

But what and with wath have flashed?
Post Screenshoot of Odin and file charged.
Have writer:
BL, (Boot Loader)/AP, (Boot Loader) is same Boot loader it's based oo which odin version you use put in field BL or AP +PIT of this "G7102XXUBNH5_G7102OJVBNH1_XSG,
Not BL_G7102XXUANE2 not see that is wrong BL?, re try with all right.

[gafary123]

But what and with wath have flashed?
Post Screenshoot of Odin and file charged.
Have writer:
BL, (Boot Loader)/AP, (Boot Loader) is same Boot loader it's based oo which odin version you use put in field BL or AP +PIT of this "G7102XXUBNH5_G7102OJVBNH1_XSG,
Not BL_G7102XXUANE2 not see that is wrong BL?, re try with all right.

<ID:0/051> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G7102XXUBNH4_2250426_REV00_user_low_ship_MULTI_ CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/051> Odin v.3 engine (ID:51)..
<ID:0/051> File analysis..
<ID:0/051> SetupConnection..
<ID:0/051> Initialzation..
<ID:0/051> Set PIT file..
<ID:0/051> DO NOT TURN OFF TARGET!!
<ID:0/051> Get PIT for mapping..
<ID:0/051> Firmware update start..
<ID:0/051> SingleDownload.
<ID:0/051> aboot.mbn
<ID:0/051> NAND Write Start!!
<ID:0/051> sbl1.mbn
<ID:0/051> rpm.mbn
<ID:0/051> tz.mbn
<ID:0/051> sdi.mbn
<ID:0/051> NON-HLOS.bin
<ID:0/051> RQT_CLOSE !!
<ID:0/051> RES OK !!
<ID:0/051> Removed!!

still after flash
could not do normal boot.