Lg G3 repair boot with usb.....

[AudiBrain]

Is this tool also working with Europe LG G3 32GB?
I have no LED when connected no boot loop nothing just the sound from PC when connecting a usb device!


I have now tested the software it runs but I think it is not working correct for me. It runs down very fast so I can't see anything only the log file in the log folder!
I hope some one can help me with this problem!

>> ---------------------------- Start Logging ----------------------------
>> USB Status : Qualcomm HS-USB QDLoader 9008 (COM4)
>> Ready to access the target board...
>> BootLoader File : All EU Global_XXXX_XXXX.mbn
>> 1. Model : All EU Global , 2. Suffix : XXXX , 3. Operator : XXXX
>> Bootloader : All EU Global_XXXX_XXXX.mbn
>> AP Chip : MSM8974_G3 , BootLoader : All EU Global_XXXX_XXXX.mbn
>> Trying Connection To Device with sahara protocol for AP Chip.
>> Successfully Connection To Device with sahara protocol for AP Chip.
>> connected with Sahara Protocol successfully.
>> Loading flash to SYS_IMEM.
>> Loading 0 Kbytes to SYS_IMEM.
>> Loading 4 Kbytes to SYS_IMEM.
>> Loading 8 Kbytes to SYS_IMEM.
>> Loading 12 Kbytes to SYS_IMEM.
>> Loading 16 Kbytes to SYS_IMEM.
>> Loading 20 Kbytes to SYS_IMEM.
>> Loading 24 Kbytes to SYS_IMEM.
>> Loading 28 Kbytes to SYS_IMEM.
>> Loading 32 Kbytes to SYS_IMEM.
>> Loading 36 Kbytes to SYS_IMEM.
>> Loading 40 Kbytes to SYS_IMEM.
>> Loading 44 Kbytes to SYS_IMEM.
>> Loading 45 Kbytes to SYS_IMEM.
>> Successfully Loaded to SYS_IMEM.(Total 45 Kbytes)
>> Flash Image was normally loaded to SYS_IMEM.
>> Checking for device status.
>> [Verifying Hello Protocol]
>> Sending Hello request 0 time(s).
>> SendSync EHOST_HELLO_RSP OK.
>> Hello Response OK.
>> Got Hello response for Hello request.
>> [Verifying Security Protocol]
>> Security Response OK.
>> Connected to flash bootloader.
1> ----------------------------------------------------------------------
>> PBL SOFTWARE HISTORY
1> ----------------------------------------------------------------------
>> 1.Smart Boot Diagnosis Tool v1.3.1 <Analysis Tool for Booting failure>
>> 2.PBL_VERSION_NUMBER [fc021834] = 1c6c6162
1> ----------------------------------------------------------------------
1> ----------------------------------------------------------------------
>> SECURE_BOOT_INFORMATION
1> ----------------------------------------------------------------------
>> [QFPROM - AP Anti-rollback Region of OEM Region ]
>> QFPROM_AP_ANTIROLLBACK_1 [0xFC4B80B8] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_2 [0xFC4B80BC] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_3 [0xFC4B80C0] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_4 [0xFC4B80C4] = 0x00000000
1> ----------------------------------------------------------------------
>> QFPROM_DEVICE_SN_1 [0xFC4B81F0] = 0x0C0DF802
>> QFPROM_DEVICE_SN_2 [0xFC4B81F4] = 0x8800000B
1> ----------------------------------------------------------------------
>> QFPROM_MSA_ANTIROLLBACK_1 [0xFC4B80C8] = 0x00000000
>> QFPROM_MSA_ANTIROLLBACK_2 [0xFC4B80CC] = 0x00000000
1> ----------------------------------------------------------------------
>> [QFPROM QFuse INFO]
>> QFPROM_OEM_ID_LSB [0xFC4B80F0] = 0x00310000
>> QFPROM_OEM_ID_MSB [0xFC4B80F4] = 0x00000000
>> QFPROM_SECURE_BOOT_ENABLE_LSB [0xFC4B83F8] = 0x00202020
>> QFPROM_SECURE_BOOT_ENABLE_MSB [0xFC4B83FC] = 0x00000000
>> QFPROM_JTAG_DISABLE_LSB [0xFC4B80E8] = 0x3FC000C0
>> QFPROM_JTAG_DISABLE_MSB [0xFC4B80EC] = 0x040001FE
1> ----------------------------------------------------------------------
>> JTAG_ID [0xFC4BE0E0] = 0x107B40E1
>> OEM_ID [0xFC4BE0E4] = 0x00310000
>> SERIAL_NUM_MSB [0xFC4B81F4] = 0x8800000B
>> SERIAL_NUM_LSB [0xFC4B81F0] = 0x0C0DF802
>> [SECURITY INFO]
>> OEM_CONFIG_ROW0_LSB_ADDR [0xFC4B80E8] = 0x3FC000C0
>> OEM_CONFIG_ROW0_MSB_ADDR [0xFC4B80EC] = 0x040001FE
>> OEM_CONFIG_ROW1_LSB_ADDR [0xFC4B80F0] = 0x00310000
>> OEM_CONFIG_ROW1_MSB_ADDR [0xFC4B80F4] = 0x00000000
>> FEAT_CONFIG_ROW0_LSB_ADDR [0xFC4B80F8] = 0x00B08010
>> FEAT_CONFIG_ROW0_MSB_ADDR [0xFC4B80FC] = 0x00000000
>> FEAT_CONFIG_ROW1_LSB_ADDR [0xFC4B8100] = 0x00000001
>> FEAT_CONFIG_ROW1_MSB_ADDR [0xFC4B8104] = 0x0004785F
1> ----------------------------------------------------------------------
>> Start Address : 0xfc102140
>> End Address : 0xfc102c80
1> ----------------------------------------------------------------------
>> PBL_APPS LOG
1> ----------------------------------------------------------------------
>> PBL_LOG_COUNT=15
>> LOG_CODE :: 0xef010800 [ DECODED : 0x00010800 ]
>> TIMESTAMP :: 0x00030aae
>> LOG_CODE :: 0xef0f0203 [ DECODED : 0x000f0203 ]
>> TIMESTAMP :: 0x00031158
>> LOG_CODE :: 0xef010802 [ DECODED : 0x00010802 ]
>> TIMESTAMP :: 0x0003469f
>> LOG_CODE :: 0xef010804 [ DECODED : 0x00010804 ]
>> TIMESTAMP :: 0x00035ce5
>> LOG_CODE :: 0xef010806 [ DECODED : 0x00010806 ]
>> TIMESTAMP :: 0x0003602e
>> LOG_CODE :: 0xef010808 [ DECODED : 0x00010808 ]
>> TIMESTAMP :: 0x000360d5
>> LOG_CODE :: 0xef01080a [ DECODED : 0x0001080a ]
>> TIMESTAMP :: 0x0003616c
>> LOG_CODE :: 0xef0f0300 [ DECODED : 0x000f0300 ]
>> TIMESTAMP :: 0x000361df
>> LOG_CODE :: 0xef01080c [ DECODED : 0x0001080c ]
>> TIMESTAMP :: 0x00036216
>> LOG_CODE :: 0xef5d0200 [ DECODED : 0x005d0200 ]
>> TIMESTAMP :: 0x000362da
>> LOG_CODE :: 0xef5d0400 [ DECODED : 0x005d0400 ]
>> TIMESTAMP :: 0x002c2278
>> LOG_CODE :: 0xef5d0201 [ DECODED : 0x005d0201 ]
>> TIMESTAMP :: 0x002c22d4
>> LOG_CODE :: 0xef0f0600 [ DECODED : 0x000f0600 ]
>> TIMESTAMP :: 0x002ee9cb
>> LOG_CODE :: 0xef0f0500 [ DECODED : 0x000f0500 ]
>> TIMESTAMP :: 0x564bcea8
>> LOG_CODE :: 0xefa00502 [ DECODED : 0x00a00502 ]
>> TIMESTAMP :: 0x564e8a6d
1> ----------------------------------------------------------------------
>> < PBL DUMP LOG >
1> ----------------------------------------------------------------------
>> 1> PBL_GENERAL_LOG_FUNC_EXEC
1> PBL_FUSE_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_FUSE_FAST_BOOT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_SDCC_LOG_DETECT_PORT_ACCESS_ERR
1> PBL_SDCC_LOG_CARD_TYPE_ERR
1> PBL_SDC_LOG_DEFAULT
1> PBL_FUSE_USB_ENUM_TIMEOUT
1> PBL_FUSE_AP_SW_REV
1> PBL_AUTHENTICATION_LOG_DEFAULT
>> Logged Time : 2015-10-24 13:49:34...successfully Completed.
>> Saved Log File(LOG_All EU Global_XXXX_XXXX_20151024_134934.txt) successfully.

[Armboldi]

I just want to say you a big thanks for sharing this method (and files). I'll report back as soon as my phone gets fixed.

[solutionfixandroid]

easy to unbrick g3

[oxgan]

reis moto g için de bir çözümün var mı? 5.1 de hardbrick oldu cihaz.

[jimmyctho]

i have lg g3 cat6 (F460L) bricked, i use this software tun unbrick but it doesn't support snapdragon 805.
i need Boot loader file: lg g3 F460L.mbn.
please help me and big thanks!!!

[SERGES52]

SmartBootDiagv1.3.1_Oversea_SVC_20141106

.[Notice] Guide to Smart Boot Diagnosis_Oversea_Rev3.1_20141106

.QDLoader HS-USB Driver_32bit_Setup
.QDLoader HS-USB Driver_64bit_Setup

...SmartBootDiagv1.3.1....

Hello and very thank you

please a want a """"AP_Chip.rar "" FOR LG G2 LS980 MODEL please!!!!

[Serhat333]

thkans a lot for this file.

[Serhat333]

>> 1> PBL_GENERAL_LOG_FUNC_EXEC
1> PBL_FUSE_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_FUSE_FAST_BOOT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_SDCC_LOG_DETECT_PORT_ACCESS_ERR
1> PBL_SDCC_LOG_CARD_TYPE_ERR
1> PBL_SDC_LOG_DEFAULT
1> PBL_FUSE_USB_ENUM_TIMEOUT
1> PBL_FUSE_AP_SW_REV
1> PBL_AUTHENTICATION_LOG_DEFAULT
>> Logged Time : 2015-10-24 13:49:34...successfully Completed.

process completed but not goes download mode or not opened..

[bmusa]

Thanks for sharing....

[bmusa]

can't wait to see my phone working again.

[l3oytoys]

APQ8084 please

[daos5264]

please someone with the necessary files for the model D850 ATT 32gb ?

[zunair]

nice tool very hard work

[xiddran]

sağol reis sen adamsın Allah razı olsun

[braicc]

thanks ! good work