-::All Wiko Mobile Firmware Download From Here::-
Flash Android Stock ROM for Wiko Highway and Wiko Cink Slim 2 using Smart Phone Flash Tool:
This guide works only with the two listed Wiko models.
All the remaining devices can have the stock ROM installed like this: download their zip files from the Devices panel, extract the contents in the zip.
Run the extracted Stock ROM executable and then follow the instructions listed by the application.
For the Wiko Highway and Cink Slim 2 you should follow the info below:
1.Download the Android ADB USB Drivers Here, then install them on your computer.
2.Switch off your device now completely.
3.Remove the device’s battery, too. Leave it unplugged until you manage to complete the stock ROM installation.
4.Download the Stock ROM for your device from the Devices panel at the end of this post.
5.Extract the stock ROM zip contents on your PC.
6.Next, download the Smart Phone Flash Tool Here.
7.Launch the ‘Flash_tool’ executable.
8.After the SP Flash Tool app is opened you should click on its ‘Scatter-loading’ button.
9.Browse the folder extracted in step 4 and then load the firmware ‘Scatter’ file in SP Flash Tool.
10.Click ‘Download’ now in order to trigger the installation process.
11.Connect your device to your PC via USB cable and press Volume Up or Volume Down until the device is detected by your computer.
12.When the SP Flash Tool detects your device you can close the app and then disconnect the device from PC, as the Android stock ROM installation has been successfully completed.
13.Plug the device’s battery back into its place and then reboot it in normal mode.
This guide works only with the two listed Wiko models.
All the remaining devices can have the stock ROM installed like this: download their zip files from the Devices panel, extract the contents in the zip.
Run the extracted Stock ROM executable and then follow the instructions listed by the application.
For the Wiko Highway and Cink Slim 2 you should follow the info below:
1.Download the Android ADB USB Drivers Here, then install them on your computer.
2.Switch off your device now completely.
3.Remove the device’s battery, too. Leave it unplugged until you manage to complete the stock ROM installation.
4.Download the Stock ROM for your device from the Devices panel at the end of this post.
5.Extract the stock ROM zip contents on your PC.
6.Next, download the Smart Phone Flash Tool Here.
7.Launch the ‘Flash_tool’ executable.
8.After the SP Flash Tool app is opened you should click on its ‘Scatter-loading’ button.
9.Browse the folder extracted in step 4 and then load the firmware ‘Scatter’ file in SP Flash Tool.
10.Click ‘Download’ now in order to trigger the installation process.
11.Connect your device to your PC via USB cable and press Volume Up or Volume Down until the device is detected by your computer.
12.When the SP Flash Tool detects your device you can close the app and then disconnect the device from PC, as the Android stock ROM installation has been successfully completed.
13.Plug the device’s battery back into its place and then reboot it in normal mode.
Comment