G532F/M repair EMMC problem

[Legija]

Up to 256mb file can be uploaded here.
You'll just rar it after reading, so no probs on that side.

G532G resurrector already exists, so You can try it after backup is done.

[CubaCenter]

I've try to reserrect but i got this message
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.48 (RIFFBOX1), JTAG Manager Version: 1.74
Selected Resurrector: [Samsung G532G ISP V1.0.6482.19990]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.80V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x90/0x4A (H8G4u ), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Selected Resurrection Data for the eMMC Chip with Capacity = 7,28 GB

Flashing the dead body...
ERROR: Timeout while waiting for DCC Loader response. Terminating at 0x0000000A0000

Should i write backup? how to?

So i can't reserrect, i will do my best to get firmware version for this phone, maybe u can make solution?

[Legija]

Timeout is due to bad connection. You should "play" with clock to get stable connection and eventually finish repair.

Don't write backup - there is no point.

[CubaCenter]

I just can't get stable conection, just change, but keep pressing "continue" becuase always stops... what i can do?

[Legija]

Does it stops at same address each time ?

[CubaCenter]

No, i could finish process always pressing continue:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.48 (RIFFBOX1), JTAG Manager Version: 1.74

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.80V, SD_CLK Frequency is 727 KHz

Detected eMMC Chip, ID: 0x90/0x4A (H8G4u ), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Selected Resurrection Data for the eMMC Chip with Capacity = 7,28 GB

Flashing the dead body...OK
Resurrection complete!

Should i try if i can flash it?

[Legija]

Yes, try entering bootloader and flashing it now.
But You must flash original firmware, not the one You killed it with.

[CubaCenter]

Didn't work... just MTK port..

Yes, try entering bootloader and flashing it now.
But You must flash original firmware, not the one You killed it with.

[Legija]

Ok.
I'll try assembling new repairpack it may take few days as I'll be out for two days from tomorrow.

[CubaCenter]

Ok thanks, i'll wait for your answer here at this thread, then download and try. Thanks! by the way, will u do with the read data i've uploaded? Thanks!

[CubaCenter]

Hi, have u made new repairpack? Thanks!

[ZameerAhmed]

Mr. Legija is Challenging hare 11-22-2017,?

Ok.
I'll try assembling new repairpack it may take few days as I'll be out for two days from tomorrow.

------------------------------------------
Didn't work... just MTK port.. ???
how Long time Customer Wait for Service Today Date 19/01/2018

Samsung YATELELE,GU46 6GG, UK
-----------------------------------------

[CubaCenter]

I'm still waiting, i'd to paid phone to my customer, never got an answer.

------------------------------------------
Didn't work... just MTK port.. ???
how Long time Customer Wait for Service Today Date 19/01/2018

Samsung YATELELE,GU46 6GG, UK
-----------------------------------------

[ZameerAhmed]

Read My Post in Box

[turca]

No have more support this box?