HTC Evo 3-D nm8pg86300

[quenten101]

have an HTC Evo 3-D nm8pg86300
For some reason when I use the resurrection file provided it does not work flashes the file but no recovery nothing brick state do you have a different file or have an idea how I can get a working file The one provided in the Riffbo manager system does not work please help thanks
also phone work before doing this anybody help please thanks

[Legija]

Hi,
Please locate resurrection log in JTAGManager.txt (file is located in RIFF directory).
Cut the part related to that phone and paste it here.

Also if You can provide more details on phone state while it was alive - whats the MID, was it rooted or not, simlocked etc and what is it that You wanted to do exactly ?

[quenten101]

phone was working and it was sim unlocked just wanted to downgrade the hboot

phone was working and it was sim unlocked just wanted to downgrade the hboot

now bricked

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.49 (RIFFBOX2), JTAG Manager Version: 1.77
Selected Resurrector: [HTC EVO3D (PG8630000) V1.0.4562.63032]

Connecting to the dead body...OK
Detected dead body ID: 0x105310E1 - WRONG!!!
ERROR: Current ID does not belong to the HTC EVO3D (PG8630000) family.

[quenten101]

bypass the id and dose not work

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.49 (RIFFBOX2), JTAG Manager Version: 1.77
Selected Resurrector: [HTC EVO3D (PG8630000) V1.0.4562.63032]

Connecting to the dead body...OK
Detected dead body ID: 0x105310E1 - IGNORED!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 9 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (KLL00M, 0x000091000000 Bytes = 2.27 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (KLL00M, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead body...OK
Resurrection complete!

[Legija]

And You havent bothered to make backup first, or ask here how to downgrade hboot?
SBL1 (secure boot loader 1) is tied to MCU ID and wont execute if MCU ID is wrong. I'll need to dig my HTC files to find a match.

[Legija]

Oh, I forgot to tell You what to do now.

1. Read 512MB from ROM1 , pack it with winrar/zip and upload here.
2. Wait for further instructions.

[quenten101]

can please tell me how to do this ?

[Legija]

Hi,
Start from here, please:
RIFF JTAG Box FAQ - JTAG Manager - DCC Read/Write TAB

[quenten101]

here is the File i hope you can fix my mistake

hello here is the File i hope you can fix my mistake i did thank you
here's is the file

[Legija]

MCU ID in phone: 5310E1
MCU ID in SBL1: 4210E1


So we need SBL1 with 5310E1 MCU ID, I'll check RUU files because they usually have multiple SBL1 for these models.

[Legija]

Ok, so Sprint version has SBL1 with correct ID.
Save this file to "RepairPacks" folder, select "HTC Evo 3D Sprint" and hit resurrection.

It should write proper bootchain partitions with correct MCU ID, which will enable Fastboot mode.


If You want to play with Hboot, use eMMC plugin and inject function.

[quenten101]

Thank you So much You're the man 😃😃 What should I do Next It says S off now I would like to root it and put custom rom This is the GSM model From overseas with SIM card Do you know what would be the best recovery And rom ?

[Legija]

Honestly I'm not sure which recovery is best, but check twrp page they have it for most models.
As for rom, check xda-developers forum.

[quenten101]

Ok Thank you for the help 😃

[quenten101]

How can I downgrade the H boot down to 1.49.0011 ?