Mr. Legija, Please Add This File In Support For All Riff Box Users...

[BOSS2017]

Sir, Please Craete SM-J210F.riffpkg OR SM-J210F_ISP.dll & Upload in Support For Every Riff Box Users...

SAMSUNG SM-J210F eMMC Pinout+Files Link : MEGA

(Please check ur Msg Inbox For "Decryption Key")


...THANKU...

[Legija]

Hello,

Here is JTAG Manager v1.58 with ISP/Direct eMMC support.
To use it, please prepare Your RIFF Box installation folder:

- Rename JTAG Manager v1.56 so You can continue using it if Your account is expired
- Backup "Useful plugins" folder content because old plugins are incompatible with new Exe, and old exe is incompatible with new plugins.
- Start v1.58 exe and download license (If Your account is not expired)
- Update Box firmware to v1.38
- Download new plugins

Old server will be online for some weeks, so users who don't need or cannot acquire new license can get license if they need it.

There will be more info in short time.

JTAG Manager 1.58
---------------------------
- added direct eMMC Access Interface on the RIFFBOX RJ-45 port (check pinout picture for CMD, CLK, DAT0, etc pins positions).
- added eMMC/SD Access page for Read/Write operations on eMMC/SD card via direct interface
- added eMMC/SD Advanced dialog which allows to perform advanced operations with eMMC/SD cards
(reading info, browsing through OCR, CID, CSD (and EXT_CSD for eMMC only) registers' fields, edit separate fields and writting back to card, reading/writting eMMC card's MCU's internal firmware, etc)
- added convenient information presentation for specific eMMC chips: pinouts for testpoints, manuals how to use testpoints to resurrect dead eMMC, etc). These INFO files (*.riffinfo) are stored in JTAG Manager's Documents folder and can be downloaded via generic <Check for Updates> operation.
- added eMMC Firmware Update option
- added eMMC Firmware Reading option (firmware is stored in *.riffemmcfw format)
For firmware read need to select chip from the list
- *.riffemmcfw eMMC firmware files are now used by RIFF for firmware updates (plain binary files are supported too)
- added elapsed time info for eMMC firmware update stages
- added eMMC Testpoint info displaying (info files must be downloaded from support and are located in the JTAG Manager's 'Documents' folder.
- added CMD42 Lock/Unlock functionality for eMMC. User can set/change/remove password to protect/unprotect (lock/unclock) the User Area Partition
- added the User Area Partition Forced Erase to erase Locked User Area Partition and to reset Device lock/unlock state and password (CMD42's consequences)
- added Samsung Factory Erase which erases and re-formats the Samsung eMMC chips.
- fixed bug displaying wrong SD card size for cards capacity less than 2GB
- few small improvements and bug fixes

Firmware 1.38
- added direct eMMC Access Interface functionality
- improved one thing in the emmc communication
- added the CMD42 Lock/Unlock/Pasword reset features
- added Forced erase of locked User Area Partition
- added Samsung eMMC Factory Formwat
- fixed bug for SD card support
- eMMC firmware update feature added

[walter11av]

oh thank you very much , I'll try as soon as possible

do you think that can repair the boot of a galaxy s4 mini i9190 ?

[ekel339]

hi legija, would u help me with my riff box, i have problem driver after upgrade firmware. i use window 10 pro. the problem come from driver.
after upgrade firmware JTAG Manager 1.58, upgrade port doesn`t switch to riff box control box.
so when the box write " waiting for restart box" it doesnt restart the box after waiting for 10 minutes.
when i look up on my device manager upgrade port doesn`t switch to riff box controller port.
so, i try to close the sofware unplug usb from riff box, plug in again than start software again.
than i got on riff menu setting for riff port box and upgrade port. ok than set the riff port box. after that riff box controller port appear. But
the problem is my riff box only in recovery mode now. & can not upgrade again. if upgrade need 30 Usd .

how to solve my problem sir. Legija?
thanks for u`re attention

[RU_X]

Hi Legija!
I had a flash 1,38b, I accidentally updated to 1.37 ! What to do now ? How to bring back the firmware 1,38b?

[shivapradhan0]

It is fantastic updates for old riff....again it is functional with emmc isp support ...thanks team

[ansyah]

_.
please help me sir..
setu JTAG Manager 1.58...how to solution FRIMWARE UPGRADE FAILED
ERROR:ACCOUNT IS EXPIRED.30 CREDITS REQUIRED.CONTACT RESELLER.
TO EXTEND ACCOUNT YOU NEED 30 CREDITS,BUT THERE ARE ONLY 0 CREDITS ON YOUR ACCOUNT
MY EMAIL:kacankpadi@gmail.com or ansyah.an98@gmail.com...plisss help me on setup riff jtag manager 1.58...plisss

[mehbub]

my riff box up to v1.50 is ok but v1.51&above not work
so can I solve by this jtag manager?if not plz say solution.tnx.

[habeebkambrath]

Getting this error when updating Firmware Please help

[ashem vohu]

Getting this error when updating Firmware Please help

hi
i have the same error

[Lignos]

GOOD MORNING TO EVERYONE . . . ! !

I HAVE TWO RIFF BOX IN THE SAME PROBLEM WITH ( ansyah ).
PLEASE SHOW ME WHERE TO BUY LICENSE. .

THIS SITE DOES NOT WORK .
Shop Riff box

THANKS. ! !

[4G-TELECOM]

Getting this error when updating Firmware Please help

you need credits 1.58 activation

[walter11av]

Where i buy 30 credits?

which would be authorized resellers ?

[gigeng]

GOOD MORNING TO EVERYONE . . . ! !

I HAVE TWO RIFF BOX IN THE SAME PROBLEM WITH ( ansyah ).
PLEASE SHOW ME WHERE TO BUY LICENSE. .

THIS SITE DOES NOT WORK .
Shop Riff box

THANKS. ! !

please contact the seller riff box where you buy?mybe can help u

[benosedr]

Riff Manager v1.58

Hello,

Here is JTAG Manager v1.58 with ISP/Direct eMMC support.
To use it, please prepare Your RIFF Box installation folder:

- Rename JTAG Manager v1.56 so You can continue using it if Your account is expired
- Backup "Useful plugins" folder content because old plugins are incompatible with new Exe, and old exe is incompatible with new plugins.
- Start v1.58 exe and download license (If Your account is not expired)
- Update Box firmware to v1.38
- Download new plugins

Old server will be online for some weeks, so users who don't need or cannot acquire new license can get license if they need it.

There will be more info in short time.

JTAG Manager 1.58
---------------------------
- added direct eMMC Access Interface on the RIFFBOX RJ-45 port (check pinout picture for CMD, CLK, DAT0, etc pins positions).
- added eMMC/SD Access page for Read/Write operations on eMMC/SD card via direct interface
- added eMMC/SD Advanced dialog which allows to perform advanced operations with eMMC/SD cards
(reading info, browsing through OCR, CID, CSD (and EXT_CSD for eMMC only) registers' fields, edit separate fields and writting back to card, reading/writting eMMC card's MCU's internal firmware, etc)
- added convenient information presentation for specific eMMC chips: pinouts for testpoints, manuals how to use testpoints to resurrect dead eMMC, etc). These INFO files (*.riffinfo) are stored in JTAG Manager's Documents folder and can be downloaded via generic <Check for Updates> operation.
- added eMMC Firmware Update option
- added eMMC Firmware Reading option (firmware is stored in *.riffemmcfw format)
For firmware read need to select chip from the list
- *.riffemmcfw eMMC firmware files are now used by RIFF for firmware updates (plain binary files are supported too)
- added elapsed time info for eMMC firmware update stages
- added eMMC Testpoint info displaying (info files must be downloaded from support and are located in the JTAG Manager's 'Documents' folder.
- added CMD42 Lock/Unlock functionality for eMMC. User can set/change/remove password to protect/unprotect (lock/unclock) the User Area Partition
- added the User Area Partition Forced Erase to erase Locked User Area Partition and to reset Device lock/unlock state and password (CMD42's consequences)
- added Samsung Factory Erase which erases and re-formats the Samsung eMMC chips.
- fixed bug displaying wrong SD card size for cards capacity less than 2GB
- few small improvements and bug fixes

Firmware 1.38
- added direct eMMC Access Interface functionality
- improved one thing in the emmc communication
- added the CMD42 Lock/Unlock/Pasword reset features
- added Forced erase of locked User Area Partition
- added Samsung eMMC Factory Formwat
- fixed bug for SD card support
- eMMC firmware update feature added

I can't download this file. Message error is: network failed