Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.53 (RIFFBOX2), JTAG Manager Version: 1.87
Selected Resurrector: [Samsung G532F ISP V1.0.6599.17149, <eMMC/SD & GPIO>, 4 Bit Bus Width (DAT0..DAT3)]
Connecting to the SD/eMMC Card...
ERROR: Set I/O Voltage to 1.80V failed. Real reading is 1.59V
samsung g532f this error solution
Connecting to the RIFF Box...OK
Firmware Version: 1.53 (RIFFBOX2), JTAG Manager Version: 1.87
Selected Resurrector: [Samsung G532F ISP V1.0.6599.17149, <eMMC/SD & GPIO>, 4 Bit Bus Width (DAT0..DAT3)]
Connecting to the SD/eMMC Card...
ERROR: Set I/O Voltage to 1.80V failed. Real reading is 1.59V
samsung g532f this error solution
Comment