Announcement

Collapse
No announcement yet.

Autel Maxisys MY908 DIP Switch settings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Autel Maxisys MY908 DIP Switch settings

    Hi,
    Would somebody know the DIP Switch settings for this Autel Maxysis MY908?
    I am looking to enter bootloader mode/ recovery
    So far standard is dip 1 and 3 on, the rest are all off for normal boot (i hope that helps somebody)
    If all pins are off except pin 4 "on", tablet goes into SEC S5PC110 TEST B/D
    but it will only stay on that mode as long as i have the power button pressed, if i release it, it will turn off.
    Even with power button held pressed, it will reset and turn off after 8 seconds, so not enough time really to access this mode.
    Alternately if somebody knows the jtag points, that would help also.
    Thanks to all members

    Pic below:
    20190523_203833.jpg - Google Drive

Working...
X