Announcement

Collapse
No announcement yet.

v3re se resiste , no se que mas hacer

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • v3re se resiste , no se que mas hacer

    hola amigos , desde hace tiempo no entraba pero he vuelto .
    tengo un problema con un v3re
    el mismo no se deja liberar , usa varios modulos y todos me toiran error , el cel se muere y loo revivo pero al intentar de nuevo me lo mata .
    el error es algo sobre qrcr que ni idea que sera .
    el soft me lo detecta al tp , lo dejo conectado como dice el soft y me tira este error , en la vercion 220 , me dice unlock error y lo mata . alguien me ayudaria y me daria alguna idea?.
    saludos

  • #2
    Originally posted by leoulles View Post
    hola amigos , desde hace tiempo no entraba pero he vuelto .
    tengo un problema con un v3re
    el mismo no se deja liberar , usa varios modulos y todos me toiran error , el cel se muere y loo revivo pero al intentar de nuevo me lo mata .
    el error es algo sobre qrcr que ni idea que sera .
    el soft me lo detecta al tp , lo dejo conectado como dice el soft y me tira este error , en la vercion 220 , me dice unlock error y lo mata . alguien me ayudaria y me daria alguna idea?.
    saludos
    No es muy común ese tipo de error si el proceso de desbloqueo se ha llevado correctamente especialmente cuando la aguja está sobre el testpoint, te sugiero que revises si el Firmware del teléfono es similar al soportado por la Rocker; asimismo en ocasiones se ha presentado el problema que Motorola junto a las operadoras de telefonía móvil reciclan los archivos Flash del teléfono a fin de hacer más díficil su desbloqueo y por lo tanto no está soportado, también debes de revisar si es problema de hardware del teléfono, una vez que hayas verificado y continúe el problema entonces la única manera de desbloquearlo es por código NO sigas intentando desbloquearlo a fin de evitar que se muera para siempre y tengas que pagar teléfono nuevo.

    Saludos
    I'll make you an offer you can't refuse.

    Comment


    • #3
      bueno les cuento que si algo tengo es cabeza dura , no me resisto a que un celular me quite el sueño asi que decidi tomar riesgo y seguir intentando , cual feu mi sorpresa ... lo pude liberar , en un momento el celular me tiraba error tras error , decidi leer bien los pasos y uno me quedo mal , que era el display , empese de 0 leyendo las instrucciones paso por paso y salio .
      eso si ... me jodia el extp que me prendia el celular asi que la mayoria del tiempo fue con la bateria ,
      saludos y si sale!!!!!!

      -----------------------------------------------------------------------------------------------------------

      Good I tell them that if I have something it is a hard head, do not resist that the cellular one takes the dream like that from me that decidi to take risk and to continue trying, which(who) feu my surprise ... I could liberate it, in a moment the cellular one was throwing(shooting) mistake to myself after mistake, decidi to read well the steps and one I remain badly, that was the display, empese of 0 reading the instructions I happen(pass) for a step and salio.
      It if ... me jodia the extp that me prendia cellular like that that

      Comment


      • #4
        Hola, yo no he tenido problemas con ese modelo, si recomiendo raspar un poco el punto de testpoint, ya que se encuentra cubierto por la pintura de la mascara que tiene la placa, y de ser posible y se animan ponerle un poco de estaño para no destruir el pad cuando se realiza el trestpoint.

        Por el tema de la bateria y el cable extp intenten usar en la segunda fase del proceso, cuando tienen que desarmar la placa y conectar el extp, de usar un cable USB de 4 pines, los que NO son autoalimentados, ya que puede probocar que la placa se encienda cuando NO debe y de esta manera estropear el proceso de liberacion y que de error el software.

        Saludos.-

        Comment


        • #5
          Buen dia pablor1977 puedes poner el esquematico del cable para saber si es autoalimentado porque yo he querido aser el unlock de varios w490,w510,w5 y V3re y en ninguno he tenido exito lo he intentado con el cable que viene en el pack de rocker fabricado por GPG y con un original de motorola siempre me marca lo mismo que no encuentra el EXTespoint la version del Extestpoint es V 5.02 desde gracias por la ayuda


          Good day pablor1977 you can put the schematic one of the cable to know if it(he) is autofed because I have loved aser the unlock of several w490.w510, w5 and V3re and in none I have had success have tried(meant) it with the cable that comes in the packaging of rocker made by GPG and with the original one of motorola always I am marked by the same thing that the EXTespoint does not find the version of the Extestpoint it(he,she) is V 5.02 from already thank you very much for the help

          Comment


          • #6
            V3re

            Originally posted by yago98 View Post
            Buen dia pablor1977 puedes poner el esquematico del cable para saber si es autoalimentado porque yo he querido aser el unlock de varios w490,w510,w5 y V3re y en ninguno he tenido exito lo he intentado con el cable que viene en el pack de rocker fabricado por GPG y con un original de motorola siempre me marca lo mismo que no encuentra el EXTespoint la version del Extestpoint es V 5.02 desde gracias por la ayuda


            Good day pablor1977 you can put the schematic one of the cable to know if it(he) is autofed because I have loved aser the unlock of several w490.w510, w5 and V3re and in none I have had success have tried(meant) it with the cable that comes in the packaging of rocker made by GPG and with the original one of motorola always I am marked by the same thing that the EXTespoint does not find the version of the Extestpoint it(he,she) is V 5.02 from already thank you very much for the help
            Friend!This is ExTP problem.You need a good ExTP and good
            USB port connection.Don't connect in any HUB.Clean local TP
            I think is only this the Problem.Is better unlock by code we with
            Code, We didn't waste time.This ExTP is not good, have many
            problems. But is only my opinion.
            BR
            Hassan

            Comment


            • #7
              Originally posted by yago98 View Post
              Buen dia pablor1977 puedes poner el esquematico del cable para saber si es autoalimentado porque yo he querido aser el unlock de varios w490,w510,w5 y V3re y en ninguno he tenido exito lo he intentado con el cable que viene en el pack de rocker fabricado por GPG y con un original de motorola siempre me marca lo mismo que no encuentra el EXTespoint la version del Extestpoint es V 5.02 desde gracias por la ayuda


              Good day pablor1977 you can put the schematic one of the cable to know if it(he) is autofed because I have loved aser the unlock of several w490.w510, w5 and V3re and in none I have had success have tried(meant) it with the cable that comes in the packaging of rocker made by GPG and with the original one of motorola always I am marked by the same thing that the EXTespoint does not find the version of the Extestpoint it(he,she) is V 5.02 from already thank you very much for the help
              Hola que tal, con cable USB autoalimentado me refiero a los que traen los 5v en los contactos, es simple de darse cuenta ya que conectando un telefono al cable usb si es de esta clase de cable, el telefono comienza a cargar como si tuviera un cargador conectado. Hay otros cables, que son los que te sugeria usar, que cuando los conectas simplemente detecta los datos cuando esta encendido el equipo, y no la carga.

              PD: Esto surgio de una charla con el amigo tynch000 a mi por lo menos hasta ahora no me ha fallado el unlock en W5 usando este cable en el extp stage.

              Saludos.-

              Comment


              • #8
                Dejo un full log de V3RE (V3_06) boot 0C.C1 liberado hoy, fijense que intente 5 veces hasta que tomo correctamente el testpoint, simplemente raspe 5 veces el punto de testpoint hasta que conecto debidamente, saludos.- :seeya:

                Code:
                
                Welcome dear user.
                Motorocker version used: 2.26
                Selected: Motorola V3rEDGE, firmware: R3442A
                Current language: Rocker
                Clicked button: UNLOCK (&Unlock)
                On WIZARD selected: &This is a new phone. Need to do default prepare stage
                On WIZARD clicked: CONTINUE button
                On WIZARD accepted port: COM17
                Detected motorola interface: Motorola Flash
                Full bootcore version: 011302FF00000CC1
                Full firmware version: R3442A_G_0E.42.04R:GSTRAZOR06PTTCTIARLA0B9
                Decision: bootcore flashing needed.
                The ExTespoint's COM port is connected.
                Full bootcore version: 011302FF00000CC1
                Full firmware version: R3442A_G_0E.42.04R:GSTRAZOR06PTTCTIARLA0B9
                Uploading ramloader of version: 0C.C0
                Reading 131072 bytes...
                Reading 262144 bytes...
                Reading 131072 bytes...
                Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                Showed WINDOW modal result: 2
                Full bootcore version: 011302FF00000CC1
                Full firmware version: R3442A_G_0E.42.04R:GSTRAZOR06PTTCTIARLA0B9
                Uploading ramloader of version: 0C.C0
                Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                Showed WINDOW modal result: 2
                Show WINDOW: Head = "Stage complete.", line1 = "Your phone now is ready for the ExTestpoint stage.", line2 = "1. Make sure the USB (EMU) cable is plugged into phone and connected to the PC.", line3 = "2. Make sure the LCD is disconnected from the board.", button1 = "", button2 = "&OK"
                Showed WINDOW modal result: 2
                The ExTespoint's COM port is connected.
                ExTP window: clicked the START (&Start) button.
                ExTP window: Started enumeration sequence.
                ExTP window: Power switched ON. Wait for device to enumerate...
                ExTP window: Sorry, no success. Not expected bootcore version: 0CC1
                ExTP window: clicked the START (&Start) button.
                ExTP window: Started enumeration sequence.
                ExTP window: Power switched ON. Wait for device to enumerate...
                ExTP window: Sorry, no success. Not expected bootcore version: 0CC1
                ExTP window: clicked the START (&Start) button.
                ExTP window: Started enumeration sequence.
                ExTP window: Power switched ON. Wait for device to enumerate...
                ExTP window: Sorry, no success. Not expected bootcore version: 0CC1
                Clicked button: UNLOCK (&Unlock)
                On WIZARD selected: &Already passed Prepare stage. Need to go to ExTP stage directly.
                On WIZARD clicked: CONTINUE button
                On WIZARD accepted port: COM17
                The ExTespoint's COM port is connected.
                ExTP window: clicked the START (&Start) button.
                ExTP window: Started enumeration sequence.
                ExTP window: Power switched ON. Wait for device to enumerate...
                ExTP window: Sorry, no success. Not expected bootcore version: 0CC1
                ExTP window: clicked the START (&Start) button.
                ExTP window: Started enumeration sequence.
                ExTP window: Power switched ON. Wait for device to enumerate...
                ExTP window: ExTP worked, starting booting...
                Full bootcore version: 011302FF00000000
                Phone serial number: 781010C01126092BA968194DBA25F002
                Uploading ramloader of version: custom ramloader used.
                Phone is booted with ExTestpoint. Flash ID: 80208818
                Flash ID: 0020 8818, SCC status: 80
                Show WINDOW: Head = "Unlock complete.", line1 = "Reconnect your phone for software to make final step.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                Showed WINDOW modal result: 2
                Detected motorola interface: Motorola Flash
                Attempt to restore: Found restore point ok.
                Full bootcore version: 011302FF00000CC1
                Full firmware version: R3442A_G_0E.42.04R:GSTRAZOR06PTTCTIARLA0B9
                Uploading ramloader of version: 0C.C0
                Done.
                Unlocked OK

                Comment


                • #9
                  Originally posted by pablor1977 View Post
                  Dejo un full log de V3RE (V3_06) boot 0C.C1 liberado hoy, fijense que intente 5 veces hasta que tomo correctamente el testpoint, simplemente raspe 5 veces el punto de testpoint hasta que conecto debidamente, saludos.- :seeya:

                  Code:
                  
                  Welcome dear user.
                  Motorocker version used: 2.26
                  Selected: Motorola V3rEDGE, firmware: R3442A
                  Current language: Rocker
                  Clicked button: UNLOCK (&Unlock)
                  On WIZARD selected: &This is a new phone. Need to do default prepare stage
                  On WIZARD clicked: CONTINUE button
                  On WIZARD accepted port: COM17
                  Detected motorola interface: Motorola Flash
                  Full bootcore version: 011302FF00000CC1
                  Full firmware version: R3442A_G_0E.42.04R:GSTRAZOR06PTTCTIARLA0B9
                  Decision: bootcore flashing needed.
                  The ExTespoint's COM port is connected.
                  Full bootcore version: 011302FF00000CC1
                  Full firmware version: R3442A_G_0E.42.04R:GSTRAZOR06PTTCTIARLA0B9
                  Uploading ramloader of version: 0C.C0
                  Reading 131072 bytes...
                  Reading 262144 bytes...
                  Reading 131072 bytes...
                  Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                  Showed WINDOW modal result: 2
                  Full bootcore version: 011302FF00000CC1
                  Full firmware version: R3442A_G_0E.42.04R:GSTRAZOR06PTTCTIARLA0B9
                  Uploading ramloader of version: 0C.C0
                  Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                  Showed WINDOW modal result: 2
                  Show WINDOW: Head = "Stage complete.", line1 = "Your phone now is ready for the ExTestpoint stage.", line2 = "1. Make sure the USB (EMU) cable is plugged into phone and connected to the PC.", line3 = "2. Make sure the LCD is disconnected from the board.", button1 = "", button2 = "&OK"
                  Showed WINDOW modal result: 2
                  The ExTespoint's COM port is connected.
                  ExTP window: clicked the START (&Start) button.
                  ExTP window: Started enumeration sequence.
                  ExTP window: Power switched ON. Wait for device to enumerate...
                  ExTP window: Sorry, no success. Not expected bootcore version: 0CC1
                  ExTP window: clicked the START (&Start) button.
                  ExTP window: Started enumeration sequence.
                  ExTP window: Power switched ON. Wait for device to enumerate...
                  ExTP window: Sorry, no success. Not expected bootcore version: 0CC1
                  ExTP window: clicked the START (&Start) button.
                  ExTP window: Started enumeration sequence.
                  ExTP window: Power switched ON. Wait for device to enumerate...
                  ExTP window: Sorry, no success. Not expected bootcore version: 0CC1
                  Clicked button: UNLOCK (&Unlock)
                  On WIZARD selected: &Already passed Prepare stage. Need to go to ExTP stage directly.
                  On WIZARD clicked: CONTINUE button
                  On WIZARD accepted port: COM17
                  The ExTespoint's COM port is connected.
                  ExTP window: clicked the START (&Start) button.
                  ExTP window: Started enumeration sequence.
                  ExTP window: Power switched ON. Wait for device to enumerate...
                  ExTP window: Sorry, no success. Not expected bootcore version: 0CC1
                  ExTP window: clicked the START (&Start) button.
                  ExTP window: Started enumeration sequence.
                  ExTP window: Power switched ON. Wait for device to enumerate...
                  ExTP window: ExTP worked, starting booting...
                  Full bootcore version: 011302FF00000000
                  Phone serial number: 781010C01126092BA968194DBA25F002
                  Uploading ramloader of version: custom ramloader used.
                  Phone is booted with ExTestpoint. Flash ID: 80208818
                  Flash ID: 0020 8818, SCC status: 80
                  Show WINDOW: Head = "Unlock complete.", line1 = "Reconnect your phone for software to make final step.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                  Showed WINDOW modal result: 2
                  Detected motorola interface: Motorola Flash
                  Attempt to restore: Found restore point ok.
                  Full bootcore version: 011302FF00000CC1
                  Full firmware version: R3442A_G_0E.42.04R:GSTRAZOR06PTTCTIARLA0B9
                  Uploading ramloader of version: 0C.C0
                  Done.
                  Unlocked OK
                  excelente pero ami tambien me tomaba el tp pero al continuar me saltaba el maldito error este , asi que calculo que fue error del cable que si estaba alimentado , aca encontre el que vino con la rocker . el proximo pruevo .
                  sabras hacerle imei a este modelo ?,
                  saludos

                  Comment


                  • #10
                    no esta soportado el imei aun, aunque figure en el modulo 1.06

                    Comment

                    Working...
                    X