Hola como estan, bueno queria confirmar que el metodo para W180 y demas modelos funciona correctamente, aqui dejo el log:
hello how're you, well I just wanted to confirm that unlock procedure for W180 and similar models it's working ok, here's the log:
Simplemente sigan los pasos para instalar los drivers como se indica aqui
Una vez que reinician el equipo, hacen lo siguiente:
- Conectan el cable miniusb (cable v3)
- Esperan a que se instalen los drivers
- Quitan la bateria
- Inician ODM Unlock
- Tildan la opcion "Autofind"
- Seleccionan como model W175/W180/W181
- Van a la solapa "Unlock"
- Insertan la bateria y casi inmediatamente clickean el boton "Connect"
- Termina de leer y click boton "Unlock NET"
Y eso es todo
Simply follow the procedure (at the letter) to install the usb drivers here
After you reboot your pc do this:
- Connct the miniusb cable to the phone (V3 cable)
- Wait until the drivers are installed
- Take out the battery
- Start ODM Unlock
- Check option "Autofind"
- Select as model W175/W180/W181
- Go to "Unlock" tab
- Put battery in phone and almost at same time, click "Connect" button
- When the connection is complete click the "Unlock NET" button
And that's all
Salu2.
BR.
hello how're you, well I just wanted to confirm that unlock procedure for W180 and similar models it's working ok, here's the log:
Code:
Check if phone already booted Power ON phone shortly Searching device ... Phone found Sending signature Sending boot Sending signature Boot sent Boot Succesfully Loaded Locosto HS Flash: Intel RD28F640W18T, 8MB Flash size : 8388608 Model type : MOTOROLA_H29 FW version : SW_%s_0.1.48 Flex version : FLEX_W175_3M_003_100 LP version : LP_%s_0148_LA1 Unlocking started Stage 1 done Stage 2 done Stage 3 done Stage 4 done Erase eeprom done Rebuilding security done. Unlocking complete
Simplemente sigan los pasos para instalar los drivers como se indica aqui
Una vez que reinician el equipo, hacen lo siguiente:
- Conectan el cable miniusb (cable v3)
- Esperan a que se instalen los drivers
- Quitan la bateria
- Inician ODM Unlock
- Tildan la opcion "Autofind"
- Seleccionan como model W175/W180/W181
- Van a la solapa "Unlock"
- Insertan la bateria y casi inmediatamente clickean el boton "Connect"
- Termina de leer y click boton "Unlock NET"
Y eso es todo
Simply follow the procedure (at the letter) to install the usb drivers here
After you reboot your pc do this:
- Connct the miniusb cable to the phone (V3 cable)
- Wait until the drivers are installed
- Take out the battery
- Start ODM Unlock
- Check option "Autofind"
- Select as model W175/W180/W181
- Go to "Unlock" tab
- Put battery in phone and almost at same time, click "Connect" button
- When the connection is complete click the "Unlock NET" button
And that's all
Salu2.
BR.
Comment