Announcement

Collapse
No announcement yet.

error motoroker 2.15

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • error motoroker 2.15

    hola colegas , tengo u problema con un v980 , no he probado con otros por miedo a matarlo como este .
    no lo puedo levantar , lo que hice fue tratar de liberarlo y murio , al repararlo me tira este error que dejo en la foto . con la version 2.10 lo repara y me quea en modo boot pero al meterle alguna flash no em deja , me tira siempre error , que puede ser que este pasando con mi box . saludpos

    ** Only problem translated **

    Problem with V980 trying to unlock, cellphone is dead, when try to repair error msg comes out see pic.
    With motorocker v2.10 repair is successfull but stays in boot mode, then trying to flash it always get error.

  • #2
    Hola leoulles, has probado en otro PC??
    Puede ser un error de tu equipo, ya sea sistema o memoria por ejemplo.
    Intenta hacerlo en otro PC que estes seguro no tenga virus ni ningun otro problema a ver como te va.
    Postea resultados saludos!

    Hi leoulles, have you try in other PC??
    Maybe the it's your PC, system or memory for example.
    Try to do in other PC, that you're sure it doesn't have any virus or other problem to see what's happen then.
    Post results regards!

    Comment


    • #3
      el problema es que la version 2.10 me lo repara bien y la 2.15 no hace nada , voy a formatear la pc aunque no creo . es un amd x64 dual core de 4200 , 4gb ram y hd de 250 , es nueva la pc y tengo 10 usb .
      saludosy gracias por responder y por traducir a ingles ,

      Comment


      • #4
        Ok intenta probar en otro equipo antes de formatear tu PC.
        Tambien tendrias que postear version de software y bootloader del telefono.
        Aqui dejo el procedimiento de reparacion que esta en la ayuda de MotoRocker:

        ** Requiere testpoint si la version de boot es mas elevada que 06.31 **

        Instrucciones de reparacion (testpoint):
        -----------------------------------------
        1. Desarme el telefono;
        2. Utiliece la imagen de testpoint correspondiente para encontrar la posicion
        del punto de testpoint en la placa;
        3. Seleccione su modelo en la lista. Por favor note que estos telefonos
        pueden tener diferentes, e incompatibles chips flash.
        El seleccionar el modelo incorrecto de flash chip, no el que realmente esta
        dentro del telefono, dejara el telefono inoperativo y requerira mas
        testpoints para la reparacion;
        4. Conecte el cable USB del lado del PC;
        5. Conecte (y mantenga conectado) la aguja de testpoint al punto TP;
        6. Conecte el cable USB al telefono;
        7. En caso de no usar un cable USB con alimentacion, conecte una fuente
        de alimentacion a la placa, ya sea fuente externa o una bateria (3,7..3,9V);
        8. Espere a que el software detecte su telefono.
        9. Clickee el boton REPAIR.
        10. Espere a que el software reporte un proceso exitoso (success).
        11. Arme el telefono.
        12. Disfrute.



        OK try to test in other PC before format your PC.
        Also you have to post SW version and bootloader in phone.
        Here's repari procedure taken from Motorocker help:

        ** Testpoint requiered if boot vers higher than 06.31 **

        Testpoint Repair Instructions:
        -----------------------------------------
        1. Disassemble your phone;
        2. Use proper testpoint picture to find position
        of the test point pad or pin on the board;
        3. Select your phone model in the models list. Please note,
        these phones can have different, not compatible flash chips.
        Selecting model with a wrong flash chip, not the one that
        is really soldered inside of your phone wiil make your phone
        not functional and will require further testpoint connections for
        repair operation;
        4. Insert PC-side of USB cable into PC connector;
        5. Connect (and hold connected) the testpoint needle to the
        test point pad;
        6. Insert phone-side of USB cable into phone's connector;
        7. In case you do not use a self-powered USB cable, apply power
        to the board whether with help of battery or with an exernal
        power supply (3,7..3,9V);
        8. Wait till software detects your phone.
        9. Click REPAIR button.
        10. Wait for software to report success completion.
        11. Assemble the phone.
        12. Enjoy.

        Regards!
        Saludos!

        Comment


        • #5
          Originally posted by macugsm View Post
          Amigos la version mas estable fue la v2.10...Uno de los errores qu pueden llegar a encontrarse pueden ser a la hora de querer cargar una flash con extension shx que te diga error
          Espero que legija para su proxima actualizacion acomode sus bugs de error...:arf:


          Friends version was more stable v2.10 ... One of the mistakes qu can reach can be found at the time of wanting to load a flash extension shx you say wrong
          I hope that legija for its next update accommodate their bugs error ...

          Hola Macu, Legija esta trabajando en una actualizacion de Motorocker en estos dias segun me ha comentado asique habra novedades dentro de poco.
          Yo por lo menos no me he encontrado con ese error que mencionan, igualmente si tengo que flashear en shx utilizo RSD siempre. Solo formato de Rocker flasheo con Motorocker.
          Saludos!

          Hi, Macu, Legija is working right now in a Motorocker update, he told me this a few days ago, so there's going to be news soon I guess.
          I didn't get this error that you say, but if I have to flash a shx file I use RSD, always. With Motocker I flash motorocker flash files only
          Regards!

          Comment


          • #6
            Originally posted by pablor1977 View Post
            Hola Macu, Legija esta trabajando en una actualizacion de Motorocker en estos dias segun me ha comentado asique habra novedades dentro de poco.
            Yo por lo menos no me he encontrado con ese error que mencionan, igualmente si tengo que flashear en shx utilizo RSD siempre. Solo formato de Rocker flasheo con Motorocker.
            Saludos!

            Hi, Macu, Legija is working right now in a Motorocker update, he told me this a few days ago, so there's going to be news soon I guess.
            I didn't get this error that you say, but if I have to flash a shx file I use RSD, always. With Motocker I flash motorocker flash files only
            Regards!
            Por mi parte si me he topado con el caso, lo que hago es que descomprimo el archivo de nuevo (por eso siempre lo dejo en .rar) y resuelto.

            ***** Translated ******
            I have this problem, what I do is decompress the file again ( thats why I always leave the .rar file) and problem solved.

            Comment


            • #7
              *** Re-opened Thread because user still have problems ***

              *** Tema reabierto ya que el usuario aun tiene el problema ***

              Comment


              • #8
                hola a todos y gracias pablo por abrir de nuevo el post .
                el tema es el siguiente :
                el movil lo repare con la version 2.10 y lo dejo en modo flash pero al flashearlo me dice devajo del soft ADDR failed:
                busque por todos lados y no encontre nada sobre esto
                offtopic: no se podria poner el soft de la rocker mas accecible y entenible ? o por lo menos en espaņol!?
                saludos

                ** english **

                hi all, and thanks to pablo for reopen thread.
                this is what's going on:
                I repaired phone with Motorocker 2.1, now it's in flash mode, but when I try to flash it software gives ADDR Failed: error.
                I search everywere and I didn't find anything about this.
                Offtopic: can Rocker software be more accessible an understandable or comprehensible? or at least to be in spanish?
                Regards

                Comment


                • #9
                  Has tratado un full flash con el RSD.

                  --------------------------------------------

                  Try full flash with RSD.

                  Comment


                  • #10
                    Originally posted by celhack View Post
                    Has tratado un full flash con el RSD.

                    --------------------------------------------

                    Try full flash with RSD.
                    hola a todos , si ya trate demeterle todos los flashes que encontre en el soporte , ahora bien , descarque la nueva actualizacion y al tratar de repararle me sale este cartel de error , muy clara con el ingles no la tengo pero.. creo que dice algo del cable y no se de que cable me habla .
                    aca dejo la toma de la foto

                    Comment


                    • #11
                      Originally posted by leoulles View Post
                      hola a todos , si ya trate demeterle todos los flashes que encontre en el soporte , ahora bien , descarque la nueva actualizacion y al tratar de repararle me sale este cartel de error , muy clara con el ingles no la tengo pero.. creo que dice algo del cable y no se de que cable me habla .
                      aca dejo la toma de la foto
                      ** With new version of Motorocker, while doing repair procedure appears the error in pic **

                      Hola este error aparece porque esta saliendo algo mal en el proceso, entoces el asistente detecta que el telefono no se conecta en el modo que deberia para ese paso.

                      Tendrias que seguir paso a paso, tal cual te va diciendo el software, las instrucciones.
                      Contactame en privado para intentar darte asistencia.
                      Luego postearemos los resultados.

                      Saludos.-

                      Hi, this error appears because something is wrong in the repair procedure, so the wizard software detects that phone it isn't connected as it suppous to be connected for that stage.

                      You should follow step by step, at the letter, the instructions given by software.
                      Send me PM for further assistance.
                      We post results later.
                      Regards.-

                      Comment


                      • #12
                        Originally posted by macugsm
                        AMIGOS SI USTEDES ESTAN CONFORME SUBIRE EL SOF DE LA ROCKER EN ESPAŅOL QUE OPINAN??? :sleep::cheers2:

                        ** English ***

                        friends if you agree I will upload Rocker software in spanish
                        macu me parece bien que se aporte, pero deberias crear un tema para no desvirtuar este y el que tiene que estar de acuerdo en postearlo aca es Legija.
                        Saludos.-

                        macu I agree with contributions, but you should start a new thread about this, to do not distort this topic reason and Legija must agree with post that software here.
                        Regards.-

                        Comment


                        • #13
                          Originally posted by macugsm
                          AMIGOS SI USTEDES ESTAN CONFORME SUBIRE EL SOF DE LA ROCKER EN ESPAŅOL QUE OPINAN??? :sleep::cheers2:

                          ** English ***

                          friends if you agree I will upload Rocker software in spanish
                          lo quiero!!!!!!! , te juro que me vendria al pelo el soft en espaņol.

                          Estos son los pasos que hago:
                          conectar el telefono mediante tp
                          marcar v980 intel y version r24
                          darle al boton reparar y listo
                          luego me pide que saque bateria , cable , coloque cable e ingrese bateria , lo hago , me lo detecta y luego me aparece ese cartel cuando va en el porsentaje 6.
                          si le erro en algo bueno digan jajaja .
                          saludos a todos

                          pd: como me doy cuenta si un v980 es intel o micro? saludos , si alguien tiene fotos que me la mande porque no se cual chip es el que hace la diferencia.

                          **english**

                          I want it!!! It would be grat to have Rocker software in spanish!!!

                          This are the steps I'm doing:
                          Connect phone with TP
                          Choose v980 intel as model and sw version r24
                          Click on Repair button
                          Then I have to take out cable and battery, put them again, then software detects the phone and when is about 6% I get the error that I've posted before.
                          If I'm wrong please tell me
                          Greetz to all

                          P: How can I know which chip is Intel or Micron? Is there any picture were I can see this difference??

                          Comment


                          • #14
                            Hola ese error creo que es porque el telefono ya esta en blank mode, yo lo que intentaria es hace un borrado del flash chip y luego comenzar la reparacion de nuevo.

                            En la solapa "Misc" tienes la funcion "Chip Erase", lo haces y luego haces "Repair" en la solapa "Service" y finalmente flasheas con una Full Flash (FF).

                            Saludos.-

                            Hi, I think this error is coz phone it's already in blank mode, so what I try to do is to erase the flash chip and then start over with repair procedure.

                            In the "Misc" tab you got the "Chip Erase" function button, do this first and then go to "Service" tab and do "Repair" and finally flash it with full flash (FF).

                            Regards.-


                            ** UPDATE **

                            Use new version of Motorocker 2.19 downlad it HERE

                            Utiliza la nueva version de Motorocker 2.19 descargala de AQUI

                            Comment


                            • #15
                              Originally posted by pablor1977 View Post
                              Hola ese error creo que es porque el telefono ya esta en blank mode, yo lo que intentaria es hace un borrado del flash chip y luego comenzar la reparacion de nuevo.

                              En la solapa "Misc" tienes la funcion "Chip Erase", lo haces y luego haces "Repair" en la solapa "Service" y finalmente flasheas con una Full Flash (FF).

                              Saludos.-

                              Hi, I think this error is coz phone it's already in blank mode, so what I try to do is to erase the flash chip and then start over with repair procedure.

                              In the "Misc" tab you got the "Chip Erase" function button, do this first and then go to "Service" tab and do "Repair" and finally flash it with full flash (FF).

                              Regards.-


                              ** UPDATE **

                              Use new version of Motorocker 2.19 downlad it HERE

                              Utiliza la nueva version de Motorocker 2.19 descargala de AQUI
                              probe sesto pero no funciono , esta bien muerto

                              -----------------------------------------------------------------------

                              i poof this but dont work , is dead ( sorry for mi english )

                              Comment

                              Working...
                              X