V186 TP Not usual board.

[pablor1977]

Hi, I have a V186 to do TP but the board it isn't like the one that is on the TP images, someboy know were is TP in this board version?

This is board were I want to do TP:





And this is the TP image that I found, the only one



Thanks,

Regards!

[vermsky]

What is the SW version and bootloader version of the phone?

[pablor1977]

I don't know because it doesn't start, that's the reason why I'm looking for tp.
All I know is that has SW version R364 dunno exactly wich version, and boot loader my client says maybe it's 07.D0, not sure, but 07.xx it is.
Thanks for reply, regards.

pablor1977.

[mrfixit]

bootloader is 08.23 I have full backup done with mssbox2 of good working phone, and I have same problem as previous post, since I used SC to try to repair software in V186 and SC changed boot to 07.?? (forget the last 2 digits) I am trying for long time to get this back into original state.
V186 is not supported by any box yet.

[orbita]

if you connect phone,software can't see phone?
or see blank phone?
may be not need TP.
you try write some in this phone?

[pablor1977]

if you connect phone,software can't see phone?
or see blank phone?
may be not need TP.
you try write some in this phone?

No it is not detected by software, it doesn't start in flash mode, just says something like "an error ocurred when trying to install device...blablabla" when you have connected and try to turn it on. Not blank mode, just nothing.

regards.

[orbita]

try this metod,in some cases work.
remove batery,cable e.t.c.
after insert cable,press and keep #+* presed and insert batery
if not detected press power on.
not sure,but can help.
try also this(make this cable,very usefull in some cases)
Jaf manual - Unlock Forum - RIFF Box support forum
if you provide 5v to 4 pin in cable phone must enter in Factory Test Mode.
my be work without TP,if not.....still need TP