V3 8.29 Dead

[vermsky]

I was experimenting around with a V3 8.29 Bootloader. I tried to do Without TP PDS repair so the bootloader will get downgraded. During final stage, the phone did not reconnect. Now the phone will not connect anymore. It will not go to flash mode. When I turn on the phone, the keypad will light up for about 30 seconds then will turn off.

I have used Magic Testpoint adapter to put phone in blank mode but whenever I connect to PC, I always get "unknown device". Device drivers are OK since I was able to connect other phones without problems. Even Ultima Box doesn't connect to the phone when I put it in blank mode.

Any suggestions?

[enrocas]

Try with test point, it has to work, post result.

[huzsolt]

Try with test point, it has to work, post result.

Yes , endeed try with the inner testpoint... should work....

[vermsky]

I wanted to do it without the inner testpoint. I thought the magic TP adapter would be enough. I guess I was wrong. Anyways, I'll just return this to our vendor.

Thanks for the replies.