Hello To All Member
I was Recived L6 On this Condition "Phone is Blank MAp Require Service"
SO I Wanted To Flash With Monster File So i Flash With 1ff File Via MSS4 so This Error Is Appear "Can't Erase" SO Then I Attach that Phone @ Ultima
First I Make Back Up then I Flashed With 1ff
@ Ultima "Flashing Start after few Secound It Dissconected "
Then I made Test Point after that I attach Via Test Point And When I Want To Write Boot Loader It attach but 50% Stop Same As Pds
So Where is the Error ... I Know The error Indicate "Flash Ic Damage"
So I Change Flash Ic (The Flash Ic Is Not a Empty Chip) I Changed In To Another Board
So After Changing Ic Phone On & Show Code Corrupted and Show Bootlaoder
08.do And Firmware R3511_G_0A[1].52.26R
Once Again I write 1ff After that Same Condition So I Repair
After Repair Same Condtion then i make tp and write bootloader and repair via test point and again flash with 1ff still same condition code corrupted
Now I ChecK This Trick
Login To Support Area then Download image Files Of L6
These Three File i Downloaded
R3511_bootcore_08.D5
R3511_pds
R3511_fullflash
Boot Core Write Ok
Pds restore Ok
Restore Flash Sopped (I Think 90% is Done ) And This Error Is Appeard
Writing Error "Range Error"
After A Lot of Hard Work I Have Not Sucess
SO My Question is Simple In Motorolla are we able to Change ic and after changing ic then do flash after flash your phone is ok (Is It Possible)
I Know The Topic is Big But It's Intresting
Any Body Tell Me After Change Flash What I DO ????? Which FLash File I write
I am Waiting For Ur Reply
Bluffmaster
I was Recived L6 On this Condition "Phone is Blank MAp Require Service"
SO I Wanted To Flash With Monster File So i Flash With 1ff File Via MSS4 so This Error Is Appear "Can't Erase" SO Then I Attach that Phone @ Ultima
First I Make Back Up then I Flashed With 1ff
@ Ultima "Flashing Start after few Secound It Dissconected "
Then I made Test Point after that I attach Via Test Point And When I Want To Write Boot Loader It attach but 50% Stop Same As Pds
So Where is the Error ... I Know The error Indicate "Flash Ic Damage"
So I Change Flash Ic (The Flash Ic Is Not a Empty Chip) I Changed In To Another Board
So After Changing Ic Phone On & Show Code Corrupted and Show Bootlaoder
08.do And Firmware R3511_G_0A[1].52.26R
Once Again I write 1ff After that Same Condition So I Repair
After Repair Same Condtion then i make tp and write bootloader and repair via test point and again flash with 1ff still same condition code corrupted
Now I ChecK This Trick
Login To Support Area then Download image Files Of L6
These Three File i Downloaded
R3511_bootcore_08.D5
R3511_pds
R3511_fullflash
Boot Core Write Ok
Pds restore Ok
Restore Flash Sopped (I Think 90% is Done ) And This Error Is Appeard
Writing Error "Range Error"
After A Lot of Hard Work I Have Not Sucess
SO My Question is Simple In Motorolla are we able to Change ic and after changing ic then do flash after flash your phone is ok (Is It Possible)
I Know The Topic is Big But It's Intresting
Any Body Tell Me After Change Flash What I DO ????? Which FLash File I write
I am Waiting For Ur Reply
Bluffmaster
Comment