Announcement

Collapse
No announcement yet.

w5, w510 unlock problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • w5, w510 unlock problem

    Hello team, i have an old problem again... i already swapped the extestpoint adapter because of that problem..., when
    to proceed with the placement of tp the system warns that the
    device was malfunctioning and can not be
    recognized or simply recognizes other versions of
    boot not supported, the strange thing is that with the v3re works,
    but the W5 (carcass white) and W510 not, I swapped drivers
    system and computer, I made everything, even the test point
    alternative does not work. Thank you all

  • #2
    Alternative test point method works with ALL W5/W490/W510/W6.

    Ofcourse, if done properly. Next time, it would be nice to see log from process, if You report any new problem.
    ICQ: 299-912-089
    QQ: 1634811353

    Comment


    • #3
      The system says:

      the device was malfunctioning and can not be
      recognized


      in alternative method.

      Comment


      • #4
        Yes, but anyway log from software would tell me some important details.
        ICQ: 299-912-089
        QQ: 1634811353

        Comment


        • #5
          In normal method the log is:

          Welcome dear user.
          Motorocker version used: 2.25
          New package file: C:\Documents and Settings\Administrador.CS-2C76350FFF23\Desktop\1FF W5 Retail\1FF W5 Retail\R452GL8_G_08.00.05R_PDS001_LP0003_DRM0101_V STG_30D_01020d_JPJAVA_G_08_R452GL8DAP_01_01_28R_GS TPEMBAMRETARLA032_1FF.sbf
          Selected: Motorola W510, firmware: R452G
          Current language: Rocker
          Clicked button: UNLOCK (&Unlock)
          On WIZARD selected: &This is a new phone. Need to do default prepare stage
          On WIZARD clicked: CONTINUE button
          On WIZARD accepted port: COM84
          Detected motorola interface: Motorola Flash
          Full bootcore version: 011302FF00000C50
          Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
          Decision: bootcore flashing needed.
          The ExTespoint's COM port is connected.
          Full bootcore version: 011302FF00000C50
          Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
          Uploading ramloader of version: 0C.50
          Reading 131072 bytes...
          Reading 65536 bytes...
          Reading 131072 bytes...
          Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
          Showed WINDOW modal result: 2
          Full bootcore version: 011302FF00000C50
          Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
          Uploading ramloader of version: 0C.50
          Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
          Showed WINDOW modal result: 2
          Show WINDOW: Head = "Stage complete.", line1 = "Your phone now is ready for the ExTestpoint stage.", line2 = "1. Make sure the USB (EMU) cable is plugged into phone and connected to the PC.", line3 = "2. Make sure the LCD is disconnected from the board.", button1 = "", button2 = "&OK"
          Showed WINDOW modal result: 2
          The ExTespoint's COM port is connected.
          ExTP window: clicked the START (&Start) button.
          ExTP window: Started enumeration sequence.
          ExTP window: Power switched ON. Wait for device to enumerate...
          ExTP window: Sorry, no success. Not expected bootcore version: 0C50
          ExTP window: clicked the START (&Start) button.
          ExTP window: Started enumeration sequence.
          ExTP window: Power switched ON. Wait for device to enumerate...
          Clicked button: UNLOCK (&Unlock)
          On WIZARD selected: Restore my phone. My heads are trembling, I will try TP later.
          On WIZARD clicked: CONTINUE button
          Detected motorola interface: Motorola Flash
          Attempt to restore: Found restore point ok.
          Full bootcore version: 011302FF00000C50
          Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
          Uploading ramloader of version: 0C.50
          Done.

          Comment


          • #6
            Set extp port to any lower from port 10.
            ICQ: 299-912-089
            QQ: 1634811353

            Comment


            • #7
              In alternative tp method the log is:

              Welcome dear user.
              Motorocker version used: 2.25
              New package file: C:\Documents and Settings\Administrador.CS-2C76350FFF23\Desktop\1FF W5 Retail\1FF W5 Retail\R452GL8_G_08.00.05R_PDS001_LP0003_DRM0101_V STG_30D_01020d_JPJAVA_G_08_R452GL8DAP_01_01_28R_GS TPEMBAMRETARLA032_1FF.sbf
              Selected: Motorola W510, firmware: R452G
              Current language: Rocker
              Clicked button: UNLOCK (&Unlock)
              On WIZARD selected: &This is a new phone. Need to do default prepare stage
              On WIZARD selected: &No luck with default prepare stage. Need to try an alternative prepare.
              On WIZARD clicked: CONTINUE button
              On WIZARD accepted port: COM84
              Detected motorola interface: Motorola Flash
              Full bootcore version: 011302FF00000C50
              Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
              Decision: bootcore flashing needed.
              The ExTespoint's COM port is connected.
              Full bootcore version: 011302FF00000C50
              Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
              Uploading ramloader of version: 0C.50
              Reading 131072 bytes...
              Reading 65536 bytes...
              Reading 131072 bytes...
              Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
              Showed WINDOW modal result: 2
              Full bootcore version: 011302FF00000C50
              Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
              Uploading ramloader of version: 0C.50
              Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
              Showed WINDOW modal result: 2
              Show WINDOW: Head = "Stage complete.", line1 = "Your phone now is ready for the ExTestpoint stage.", line2 = "1. Make sure the USB (EMU) cable is plugged into phone and connected to the PC.", line3 = "2. Make sure the LCD is disconnected from the board.", button1 = "", button2 = "&OK"
              Showed WINDOW modal result: 2
              The ExTespoint's COM port is connected.
              ExTP window: clicked the START (&Start) button.
              ExTP window: Started enumeration sequence.
              ExTP window: Power switched ON. Wait for device to enumerate...
              ExTP window: clicked the START (&Stop) button.
              ExTP window: Please connect ExTestpoint and click Start...
              Clicked button: UNLOCK (&Unlock)
              On WIZARD selected: &This is a new phone. Need to do default prepare stage
              On WIZARD selected: Restore my phone. My heads are trembling, I will try TP later.
              On WIZARD clicked: CONTINUE button
              Detected motorola interface: Motorola Flash
              Attempt to restore: Found restore point ok.
              Full bootcore version: 011302FF00000C50
              Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
              Uploading ramloader of version: 0C.50
              Done.

              Comment


              • #8
                Originally posted by legija
                Set extp port to any lower from port 10.
                Ok, I will try.

                Comment


                • #9
                  No Luck, i turn com port to 10 and put speed down (at 75bps)!!! no work.



                  Welcome dear user.
                  Motorocker version used: 2.25 (Motorola V980 Intel, R24)
                  Package file: NOT SELECTED
                  Language file: NOT SELECTED
                  Selected: Motorola W510, firmware: R452G
                  Clicked button: UNLOCK (&Unlock)
                  On WIZARD selected: &This is a new phone. Need to do default prepare stage
                  On WIZARD clicked: CONTINUE button
                  On WIZARD accepted port: COM10
                  Detected motorola interface: Motorola Flash
                  Full bootcore version: 011302FF00000C50
                  Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
                  Decision: bootcore flashing needed.
                  The ExTespoint's COM port is connected.
                  Full bootcore version: 011302FF00000C50
                  Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
                  Uploading ramloader of version: 0C.50
                  Reading 131072 bytes...
                  Reading 65536 bytes...
                  Reading 131072 bytes...
                  Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                  Showed WINDOW modal result: 2
                  Full bootcore version: 011302FF00000C50
                  Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
                  Uploading ramloader of version: 0C.50
                  Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                  Showed WINDOW modal result: 2
                  Show WINDOW: Head = "Stage complete.", line1 = "Your phone now is ready for the ExTestpoint stage.", line2 = "1. Make sure the USB (EMU) cable is plugged into phone and connected to the PC.", line3 = "2. Make sure the LCD is disconnected from the board.", button1 = "", button2 = "&OK"
                  Showed WINDOW modal result: 2
                  The ExTespoint's COM port is connected.
                  ExTP window: clicked the START (&Start) button.
                  ExTP window: Started enumeration sequence.
                  ExTP window: Power switched ON. Wait for device to enumerate...
                  ExTP window: Sorry, no success. Not expected bootcore version: 0C50
                  ExTP window: clicked the START (&Start) button.
                  ExTP window: Started enumeration sequence.
                  ExTP window: Power switched ON. Wait for device to enumerate...
                  ExTP window: clicked the START (&Stop) button.
                  ExTP window: Please connect ExTestpoint and click Start...
                  Clicked button: UNLOCK (&Unlock)
                  On WIZARD selected: Restore my phone. My heads are trembling, I will try TP later.
                  On WIZARD clicked: CONTINUE button
                  Detected motorola interface: Motorola Flash
                  Attempt to restore: Found restore point ok.
                  Full bootcore version: 011302FF00000C50
                  Full firmware version: R452G_G_08.11.05R:GSTPEMBATIMBRLA0B1
                  Uploading ramloader of version: 0C.50
                  Done.

                  Comment


                  • #10
                    Select alternative method, and make sure to have TP needle sharp enough. You cannot do this without microscope. It really needs precision.
                    ICQ: 299-912-089
                    QQ: 1634811353

                    Comment


                    • #11
                      The Test point location of w5, w510 and w490 is in an micro-resistence, i no need an microscope for see it, i have unlock a varios w5, and no have a problem, now this problem apears... I Think.... this problemapears fisical, i go to try change the extp adapter again from reseler...

                      Comment


                      • #12
                        Alternative TP is not on resistor, but on same pin on CPU as for U3.
                        Did You unlocked any U3 before ?
                        ICQ: 299-912-089
                        QQ: 1634811353

                        Comment


                        • #13
                          Is Not on Testpoint b picture?, i never unlock u3... please, i need link for an picture or complete method. excuse-me for my mistake.

                          Comment


                          • #14
                            Originally posted by slash10 View Post
                            Hello team, i have an old problem again... i already swapped the extestpoint adapter because of that problem..., when
                            to proceed with the placement of tp the system warns that the
                            device was malfunctioning and can not be
                            recognized or simply recognizes other versions of
                            boot not supported, the strange thing is that with the v3re works,
                            but the W5 (carcass white) and W510 not, I swapped drivers
                            system and computer, I made everything, even the test point
                            alternative does not work. Thank you all
                            Same problem with me....same same same problem....always SAYS: "when
                            to proceed with the placement of tp the system warns that the
                            device was malfunctioning and can not be
                            recognized"

                            So, what can I do....happens with a W6 and W510....same time....what do you recommend me? how do you unlocked this phone? remember....same problem like you....

                            help me please....

                            I am desperate....

                            THANKS IN ADVANCE.

                            BR
                            ..:: Improving this box to the top ::..

                            Comment


                            • #15
                              W6

                              Originally posted by chatfan View Post
                              Same problem with me....same same same problem....always SAYS: "when
                              to proceed with the placement of tp the system warns that the
                              device was malfunctioning and can not be
                              recognized"
                              So, what can I do....happens with a W6 and W510....same time....what do you recommend me? how do you unlocked this phone? remember....same problem like you....
                              help me please....
                              I am desperate....
                              THANKS IN ADVANCE.
                              BR
                              Yes I see this, but I Just tell you for see or read wath the one
                              that Legija says for make, in your case I only see a problem,in
                              ExTP I think this have some Problem. many of ExTP of Ipmart has
                              problems.If you have other for test is good, you was been to know
                              if it was problem of ExTP or not.Also you have to see the place of
                              the test-point the correct no is of MSS but the one of the w5/W510Ö
                              In this moment I donít see another form, I think is better
                              You relax and wait for celhack tell anything.
                              BR
                              Hassan

                              Comment

                              Working...
                              X