Announcement

Collapse
No announcement yet.

28.11.2008 MotoRocker v2.25

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 28.11.2008 MotoRocker v2.25

    25.11.2008 MotoRocker v2.24 released

    Whats new:

    This is bug fix release:

    • Fixed bug with ROM4 prepare stage and endless loop
    • Fixed som bugs related to logging window

    There are some language localisations added too :

    • Spanish
    • Serbian/Croatian/Bosniak/Montenegrin
    • Swedish
    • Bulgarian
    • Slovenian

    Thanks goes to contributors, gsmprounlock, tostefo, veliki, macu .

    Please download "MotoRocker_v2.24.exe" from support area.

    Enjoy Using Rocker Dongle !
    ICQ: 299-912-089
    QQ: 1634811353

  • #2
    Great job Mr. Legija, this fix is the same problem that I posted in video file in this Forum, great job, really ROM4 using ExTP giving me some errors as you said above. I used Motorocker v2.22 in order to unlock this ROM4 models.
    ..:: Improving this box to the top ::..

    Comment


    • #3
      bug for write fullflash in motorola w510, error adress.......... please solved this

      Comment


      • #4
        Post log please.
        ICQ: 299-912-089
        QQ: 1634811353

        Comment


        • #5
          Code:
          Welcome dear user.
          Motorocker version used: 2.24 (Motorola V980 Micron, R24)
          Package file: D:\CELULARES\boxes originales\rocker box\flashes\w510\Retail_R452G_G_08.11.05R_PDS009_LP0039_DRM0101_JPJAVA_G_08_W510ME_06_00_07R_GSTPEMBARTDE076_1FF\Retail_R452G_G_08.11.05R_PDS009_LP0039_DRM0101_JPJAVA_G_08_W510ME_06_00_07R_GSTPEMBARTDE076_1FF.rnsf
          Language file: NOT SELECTED
          Selected: Motorola W510, firmware: R452G
          Clicked button: WRITE PACKAGE (&Escribir paquete)
          Detected motorola interface: Motorola Flash
          Full bootcore version: 011302FF00000C50
          Full firmware version: R452G_G_08.11.05R:GSTPEMBARTDE076

          Comment


          • #6
            NEED Motorola TP manual !!! and foto :yikes:
            GSM PHONES :aureola:

            Comment


            • #7
              Testpoint can be found in rocker download site.
              For manual.... just open software and follow step by step what software say.
              It's very easy.

              Comment


              • #8
                Ok, just uploaded MotoRocker_v2.25 to support area.

                - Fixed bugs with bootcore 09.02
                - Fixed "Access Violation"
                - Some other small fixes too

                You can download it and install, please report any new discovered problems here.

                Enjoy Using Rocker Dongle !
                ICQ: 299-912-089
                QQ: 1634811353

                Comment


                • #9
                  Just a detail, after doing a successfully unlock with P2k phones, when ask for phone info still shows "SIM Lock Present" and there's no SIM Lock :lol:

                  BR.-

                  Comment


                  • #10
                    Hi, Motorola W5 bootloader 0C.A1 working 1000% with latest Moto Rocker v2.25
                    here is my log.

                    Advice: the TP con exTP is very dificult only working with alternative TP, and finaly boot downloaded from 0C.A1 to 0C.50
                    thx Mr. Legija!

                    Welcome dear user.
                    Motorocker version used: 2.25
                    Selected: Motorola W5, firmware: R452GL8
                    Current language: Rocker
                    Clicked button: UNLOCK (&Unlock)
                    On WIZARD selected: &This is a new phone. Need to do default prepare stage
                    On WIZARD selected: &No luck with default prepare stage. Need to try an alternative prepare.
                    On WIZARD clicked: CONTINUE button
                    On WIZARD accepted port: COM80
                    Wait for TCI started.
                    Switching to TCI mode...
                    Clicked button: UNLOCK (&Stop)
                    Waiting for flash interface init...
                    Clicked button: UNLOCK (&Unlock)
                    On WIZARD selected: &This is a new phone. Need to do default prepare stage
                    On WIZARD clicked: CANCEL button
                    Clicked button: UNLOCK (&Unlock)
                    On WIZARD selected: &No luck with default prepare stage. Need to try an alternative prepare.
                    On WIZARD clicked: CONTINUE button
                    On WIZARD accepted port: COM80
                    Detected motorola interface: Motorola Flash
                    Full bootcore version: 011302FF01000CA1
                    Full firmware version: R452GL8_G_08.00.05R:GSTPEMBAMDGTVZLA045
                    Decision: bootcore flashing needed.
                    The ExTespoint's COM port is connected.
                    Full bootcore version: 011302FF01000CA1
                    Full firmware version: R452GL8_G_08.00.05R:GSTPEMBAMDGTVZLA045
                    Uploading ramloader of version: 0C.50
                    Reading 131072 bytes...
                    Reading 65536 bytes...
                    Reading 131072 bytes...
                    Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                    Showed WINDOW modal result: 2
                    Full bootcore version: 011302FF01000CA1
                    Full firmware version: R452GL8_G_08.00.05R:GSTPEMBAMDGTVZLA045
                    Uploading ramloader of version: 0C.50
                    Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                    Showed WINDOW modal result: 2
                    Show WINDOW: Head = "Stage complete.", line1 = "Your phone now is ready for the ExTestpoint stage.", line2 = "1. Make sure the USB (EMU) cable is plugged into phone and connected to the PC.", line3 = "2. Make sure the LCD is disconnected from the board.", button1 = "", button2 = "&OK"
                    Showed WINDOW modal result: 2
                    The ExTespoint's COM port is connected.
                    ExTP window: clicked the START (&Start) button.
                    ExTP window: Started enumeration sequence.
                    ExTP window: Power switched ON. Wait for device to enumerate...
                    ExTP window: Sorry, no success. Not expected bootcore version: 0CA1
                    Clicked button: UNLOCK (&Unlock)
                    On WIZARD selected: &This is a new phone. Need to do default prepare stage
                    On WIZARD selected: &Already passed Prepare stage. Need to go to ExTP stage directly.
                    On WIZARD clicked: CONTINUE button
                    On WIZARD accepted port: COM80
                    The ExTespoint's COM port is connected.
                    ExTP window: selected prepare method is "Alternative"
                    ExTP window: clicked the START (&Start) button.
                    ExTP window: Started enumeration sequence.
                    ExTP window: Power switched ON. Wait for device to enumerate...
                    ExTP window: Sorry, no success. Not expected bootcore version: 0CA1
                    ExTP window: clicked the START (&Start) button.
                    ExTP window: Started enumeration sequence.
                    ExTP window: Power switched ON. Wait for device to enumerate...
                    ExTP window: Sorry, no success. Not expected bootcore version: 0CA1
                    Clicked button: UNLOCK (&Unlock)
                    On WIZARD selected: &This is a new phone. Need to do default prepare stage
                    On WIZARD selected: &Already passed Prepare stage. Need to go to ExTP stage directly.
                    On WIZARD clicked: CONTINUE button
                    On WIZARD accepted port: COM80
                    The ExTespoint's COM port is connected.
                    ExTP window: selected prepare method is "Alternative"
                    ExTP window: clicked the START (&Start) button.
                    ExTP window: Started enumeration sequence.
                    ExTP window: Power switched ON. Wait for device to enumerate...
                    ExTP window: ExTP worked, starting booting...
                    Full bootcore version: 011302FF01000000
                    Phone serial number: 681011C0091C092B5FCFD861BA64F002
                    Uploading ramloader of version: custom ramloader used.
                    Phone is booted with ExTestpoint. Flash ID: 80898810
                    Flash ID: 0089 8810, SCC status: 80
                    Show WINDOW: Head = "Unlock complete.", line1 = "Reconnect your phone for software to make final step.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
                    Showed WINDOW modal result: 2
                    Detected motorola interface: Motorola Flash
                    Attempt to restore: Found restore point ok.
                    Full bootcore version: 011302FF01000CA1
                    Full firmware version: R452GL8_G_08.00.05R:GSTPEMBAMDGTVZLA045
                    Uploading ramloader of version: 0C.50
                    Done.
                    Unlocked OK

                    Comment


                    • #11
                      oh sorry! bootloader is finaly de same 0C.A1 just use 0C.50 in the process..

                      Comment


                      • #12
                        Working in perfect condition this last update MotoRocker 2.25 with ARGON and ROM4 models, today I unlocked five v3rEDGE (boot 0C.C1 & 0C.F4 both tested)...all OK!!...Fixed issue with this platform in previous version of MR


                        ...Nice job....

                        Just letting know.

                        BR.

                        chatfan
                        ..:: Improving this box to the top ::..

                        Comment


                        • #13
                          Originally posted by dusymem View Post
                          oh sorry! bootloader is finaly de same 0C.A1 just use 0C.50 in the process..

                          I would like to know wich method (not procedure) do you use to make alternative tp, since I look the pcb under a 20x magnifier and I saw that it's too dificult to connect the needle in the tp, because you have some components that won't let you a "clear way" to connect the needle.

                          Thx in adv.

                          BR.-

                          Comment


                          • #14
                            It is exactly same as for U3. It is not so complicated, but yes, need some sort of magnifier.
                            ICQ: 299-912-089
                            QQ: 1634811353

                            Comment


                            • #15
                              Yesterday i was trying to read CG4 from a working V3, but software is missing something as i could'nt select what CG to read, had to use prior version, here is screenshot of window i got without choices, luck

                              Comment

                              Working...
                              X