Announcement

Collapse
No announcement yet.

v3i dead after repaire PDS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • v3i dead after repaire PDS

    Please....
    Escuse me
    V3i dead after repaire pds
    I have flash with monster flash but same problem.help me please

    boot loader 0A.31
    SW Version
    R479-G-08.B4.34R

    and I m very sorry.

  • #2
    Originally posted by alice21 View Post
    Please....
    Escuse me
    V3i dead after repaire pds
    I have flash with monster flash but same problem.help me please

    boot loader 0A.31
    SW Version
    R479-G-08.B4.34R

    and I m very sorry.
    Hello, please check this post to try solve your problem, if no success then post here again.

    How to repair Motorola phones here !

    Good luck.

    Regards!

    Comment


    • #3
      same prob.after erase chip and flash with monster flash
      -R479_G_08.B4.34R_PDS005_LP0039_DRM0101_JPJAVA_G_08 _V3i_06_00_04R_SE7740AXXP1053_1FF.rnsf

      after I repaired pds and same problem.
      please help me

      Comment


      • #4
        Originally posted by alice21 View Post
        Please....
        Escuse me
        V3i dead after repaire pds
        I have flash with monster flash but same problem.help me please

        boot loader 0A.31
        SW Version
        R479-G-08.B4.34R

        and I m very sorry.
        give more info please.
        phone now is in blank state,phone show only bootloader info,phone show bootloader info and some error.
        if show some error,what error show phone.
        why you repair pds in this phone?

        Comment


        • #5
          no error and phone show bootloader
          I repaire pds because no network in this phone

          Comment


          • #6
            Originally posted by alice21 View Post
            Please....

            boot loader 0A.31
            SW Version
            R479-G-08.B4.34R
            this version was before you make repair,or you flashed with this version?
            what rocker version software you use now?

            Comment


            • #7
              Originally posted by orbita View Post
              this version was before you make repair,or you flashed with this version?
              what rocker version software you use now?
              try this.
              use rocker version 2.13.
              flash phone with flash version was in phone before you make repair or hight.
              make repair(in software tick "use testpoint" and click without TP.
              after this try phone.
              if not work flash phone again.
              if all done good,must work.

              if not work make same,but with phisical TP.
              this meen disasemble phone,and make all operation with phisical TP.
              after post here if work

              Comment


              • #8
                Please post me TP for V3i and procedure ...???

                Comment


                • #9
                  Originally posted by alice21 View Post
                  Please post me TP for V3i and procedure ...???
                  Please use SEARCH you'll find all you need.

                  Regards.-

                  Comment


                  • #10
                    Good if you could tell your V3i is the key iTunes or not. If the mobile is not likely that key 76r making it sticky and it certainly turned again.

                    Only the PDS repair some of the modules and enter the Rocker is Flash. Tell us
                    as you were ...
                    R479_G_08.B5.76R - Download - 4shared

                    Regards!

                    No hablo muy el ingles pero espero haberlo ayudado!

                    Comment


                    • #11
                      Originally posted by alice21 View Post
                      Please....
                      Escuse me
                      V3i dead after repaire pds
                      I have flash with monster flash but same problem.help me please

                      boot loader 0A.31
                      SW Version
                      R479-G-08.B4.34R

                      and I m very sorry.
                      try with ramdldr

                      Comment


                      • #12
                        @alice21.
                        without TP function not need TP conection.
                        need check this box if use "without TP" funcion.
                        here you can find some info
                        w218 error 01?????? HAMAS need help dude! - Unlock Forum - RIFF Box support forum

                        @weso.villalobos
                        yes sure.
                        but not for beginer:biggrin5:

                        Comment


                        • #13
                          i suggest you only use 2.15 exe and download the latest flash file put in the write package and click it, wait for smile, no need tp.

                          Comment

                          Working...
                          X