How can I unlock Motorola W370 from TRACFONE...how? Please help me

[chatfan]

I have a Motorola W370 from TRACFONE I need to unlock it...how can I do this? With Moto Rocker v2.17?

Please help me my friend..I use Rocker Dongle device....

Thanks in advance

[celhack]

I have a Motorola W370 from TRACFONE I need to unlock it...how can I do this? With Moto Rocker v2.17?

Please help me my friend..I use Rocker Dongle device....

Thanks in advance

First use search before post.

but here you have the help.

Download full flash of W375 from support.
Start odm 1.23 or 1.19
Click connect, boot the phone.
Click in flash, select software and press write.
when finish, turn on your phone, it gona be in phone hacked.
press connect and later press unlock.

[chatfan]

but

but Motorola W370 device has MiniUSB port, just why ODM and not Motorocker? Why?

[pablor1977]

but Motorola W370 device has MiniUSB port, just why ODM and not Motorocker? Why?

Hi, usb interface is to access memory, which is handled by pc as removible drive, but phone interface is ODM so you must use ODM Rocker Module, and ODM cable.

Regards.-

[chatfan]

Full List

OK I understand now, thanks for all your support, I don't have any doubt about this is the best and more active forum for Motorola...thanks for everything...for real.

But I would like get a FULL list of ODM, LTE, LTE2, LTE2ROM4, ARGON..etc..Does exist this full list? an URL?

Thanks in advance.

Regards.

[jibril_s]

I have been searching for the last 3 days a I have found no additional information. I have the motorola TI driver installed for the w370. So when I plug it up it says charging. In ODM it detects that the phone is on com port 10 and that is accurate with what device manager says. However when I click connect i get:

Check if phone already booted
Power ON phone shortly
Boot Loading Error

Could someone let me know what I am doing wrong. Thankyou

[celhack]

I have been searching for the last 3 days a I have found no additional information. I have the motorola TI driver installed for the w370. So when I plug it up it says charging. In ODM it detects that the phone is on com port 10 and that is accurate with what device manager says. However when I click connect i get:

Check if phone already booted
Power ON phone shortly
Boot Loading Error

Could someone let me know what I am doing wrong. Thankyou

Do not use usb cable. use t191 cable.

[jibril_s]

Thanks for the info. I tried the t191 cable and I get this now.

Version 1.8
Check if phone already booted
Power ON phone shortly
Phone found
Sending signature
Sending boot
Boot Loading Error

Version 1.26
Check if phone already booted
Power ON phone shortly
Phone found
Sending signature
Sending boot
No answer from boot1
Boot Loading Error


I read in another thread to use ODM 1.18 but none of the versions I have are working. Any insight on this problem.

[celhack]

Thanks for the info. I tried the t191 cable and I get this now.

Version 1.8
Check if phone already booted
Power ON phone shortly
Phone found
Sending signature
Sending boot
Boot Loading Error

Version 1.26
Check if phone already booted
Power ON phone shortly
Phone found
Sending signature
Sending boot
No answer from boot1
Boot Loading Error


I read in another thread to use ODM 1.18 but none of the versions I have are working. Any insight on this problem.

Friend use 1.25 or 1.26 and remember use profilic adapter or cable. If you have com cable use odm 1.19. Test and post result.

[tecnicell]

Tried to connect as W377.... I think u have a .k3 firmware.. if u do read a full backup and send to support please

[jibril_s]

This is what I get with ODM 1.26 with the t191 rj45 cabe plugged into the rocker dongle with w377 chosen as the phone type. I tried to read the flash. This is the first response I've gotten other than "no boot1"

Check if phone already booted
Power ON phone shortly
Phone found
Sending signature
Sending boot
Boot sent
Boot Succesfully Loaded
Calypso+ HS
Flash: Intel 28F128L30T 16Mb (Strata)
Flash size : 16777216
Model type : MOTOROLA_H80S
FW version : 6.9.75
Flex version : Unknown
LP version :
Start reading ...
Phone not answer ...
Phone not answer ...
Reading aborted.

[tecnicell]

This is what I get with ODM 1.26 with the t191 rj45 cabe plugged into the rocker dongle with w377 chosen as the phone type. I tried to read the flash. This is the first response I've gotten other than "no boot1"

Check if phone already booted
Power ON phone shortly
Phone found
Sending signature
Sending boot
Boot sent
Boot Succesfully Loaded
Calypso+ HS
Flash: Intel 28F128L30T 16Mb (Strata)
Flash size : 16777216
Model type : MOTOROLA_H80S
FW version : 6.9.75
Flex version : Unknown
LP version :
Start reading ...
Phone not answer ...
Phone not answer ...
Reading aborted.

OK, then I think this is a .K3 firmware.... I have no idea which firmware fit in this tracfone phone

[jibril_s]

Thankyou all for your input. I assume there is no solution for this firmware version. Too bad I hoped this would work too.

[mac1234]

Friend use 1.25 or 1.26 and remember use profilic adapter or cable. If you have com cable use odm 1.19. Test and post result.

Where can I find any of these ODM's? :banghead:

[Hamas]

Where can I find any of these ODM's?

Where can I find any of these ODM's? :banghead:

Friend!You have Rocker Dongle? If yes go to Support.
And now you don't need this old versions,have news
version ODM.If you don't have Rocker you can't get
any Software for Rocker, and This software only work
with Rocker Box (Card).
BR
Hassan