C139 Tracfone unlock 100%.

[elpocitano]

Work very well.
1 - Use prolific 2303 cable.
2 - After write the boot to phone (phone frezze) you must to flash.
3 - Conect with rocker using Prolific 2303 cable and without battery.
4 - Select C139 and push conect, now insert battery.
5 - You can flash now and then unlock.
Tested.....
Remember (Prolific 2303 cable)
Tested with ODM Rocker 1.18 and flashed with firmware 1.0.0.6 from Movistar.
Escuse my English.

[portalgsm]

That is no false tranfone works --- I have three 8.8.17 and does not work

[celhack]

I'VE READ UNLOCK CODE WITH COMPAL SOFT BY RS232 CABLE. pHONE WRITES SIM NOT VALID. hOW CAN i ENTER TIS CODE?

This coz you need flash the phone to get it work.

i READ UNLOCK CODE FOR C139 HOW CAN I ENTER IT?

I'VE READ UNLOCK CODE WITH COMPAL SOFT BY RS232 CABLE. pHONE WRITES SIM NOT VALID. hOW CAN i ENTER TIS CODE?

[KKen]

Do you use a box?

Other than you using a T191 r45 universal cable and possible
different firmware in the units, I can't figure out why I can get it
to work. I know the cable has to be good since I just unlocked
my Cingular version of the C139.

thank you,
Ken

First was #02# to view phone ver. and see uart flag, because someone said when flag is =1 don't connect to pc but my phone was =1 and work perfect.
Second **16379# trace on (or modem on).
3- Connect phone to pc with t191 rj45 universal cable.
4- Select c139 model in mot931 and press unlock.
5- Do the rest with rocker or dmtool.

[celhack]

First was #02# to view phone ver. and see uart flag, because someone said when flag is =1 don't connect to pc but my phone was =1 and work perfect.
Second **16379# trace on (or modem on).
3- Connect phone to pc with t191 rj45 universal cable.
4- Select c139 model in mot931 and press unlock.
5- Do the rest with rocker or dmtool.

[KKen]

Could not see video clearly

Could not make out any of the writing on the screen
of you tracphone.
What was the first sequence of buttons you pressed?
It look like you where getting a lot of data on the cell
phone screen.

Could you please compare the phone that you demostrated
to mine. There must be a difference explaining why I can not
communicate.

With MSTOOLS 8r I can only do a READ. Here is what I get

Open serial port...ok
Connecting to handset...
Phone IMEI: 359xxxxxxxxxxx
Setting factory test mode...ok
Software version: 8817
Hardware version: 001U1006
Flex version: FFN_C139_TP_TOH
Language pack version: LPN_C139_NA_TOH
Transiver kit number: SJUG3757CA
Simlock state: UNLOCK
Bar code: P324955475
Battery voltage: 4.1084
Handset info read ok

Check this video, is in 3gp format, use quicktime player to see it. And i mean with other tracfone phone.
Link

[celhack]

The T191 cable and computer worked perfectly with DMTOOLS
on my "Cingular C139" No luck on my Tracphone C139

Please state again what you are asking.

Thank you,
Ken

Check this video, is in 3gp format, use quicktime player to see it. And i mean with other tracfone phone.
Link

[KKen]

not sure what you mean "test with other phone"

The T191 cable and computer worked perfectly with DMTOOLS
on my "Cingular C139" No luck on my Tracphone C139

Please state again what you are asking.

Thank you,
Ken

Can you test with other phone.?

[celhack]

I am using only computer and T191 cable.

Ken

Can you test with other phone.?

[KKen]

Not using box

I am using only computer and T191 cable.

Ken

Which box are you using for interface?

[celhack]

Still no luck. Followed those instructions.
Cable is good. I was able to unlock my Cingular 139 no problem
with DMTOOLS.

Using MSTOOLS 8r and clicking READ I get the following

Open serial port...ok
Connecting to handset...
Phone IMEI: 359xxxxxxxxxxx
Setting factory test mode...ok
Software version: 8817
Hardware version: 001U1006
Flex version: FFN_C139_TP_TOH
Language pack version: LPN_C139_NA_TOH
Transiver kit number: SJUG3757CA
Simlock state: UNLOCK
Bar code: P324955475
Battery voltage: 4.1084
Handset info read ok

Not sure why tfl doesn't work???

Thank you,
Ken

Which box are you using for interface?

[KKen]

Still no luck. Followed those instructions.
Cable is good. I was able to unlock my Cingular 139 no problem
with DMTOOLS.

Using MSTOOLS 8r and clicking READ I get the following

Open serial port...ok
Connecting to handset...
Phone IMEI: 359xxxxxxxxxxx
Setting factory test mode...ok
Software version: 8817
Hardware version: 001U1006
Flex version: FFN_C139_TP_TOH
Language pack version: LPN_C139_NA_TOH
Transiver kit number: SJUG3757CA
Simlock state: UNLOCK
Bar code: P324955475
Battery voltage: 4.1084
Handset info read ok

Not sure why tfl doesn't work???

Thank you,
Ken

You need use the phone turned on, **16379# and put the phone in trace on. Don't use ftdi box as com. use profilic usb cable or serial rs232 cable.

[celhack]

Not Working ??????? Please me more details !!!

The unlocker did not work for me.
Is there something in the version I have?

Trac version
001M1006
713296953770
Who:sw_cm
SW Ver:8.8.17

on the back behind battery

C139 (G8/19) S/W:V8.8.17
Model: TFC139B

With the Software Tracfone Mobile Unlock 1.0 by Lawer show
Model: Motorola C139
Loading...
Phone not found,

the phone if turned on or off ???


With Rocker Dongle v.1.21
Check if phone already booted
Power ON phone shortly
Boot Loading Error

PortalGSM

Please, help C139 Tacfone v 8.8.17

You need use the phone turned on, **16379# and put the phone in trace on. Don't use ftdi box as com. use profilic usb cable or serial rs232 cable.

[portalgsm]

Not Working ??????? Please me more details !!!

The unlocker did not work for me.
Is there something in the version I have?

Trac version
001M1006
713296953770
Who:sw_cm
SW Ver:8.8.17

on the back behind battery

C139 (G8/19) S/W:V8.8.17
Model: TFC139B

With the Software Tracfone Mobile Unlock 1.0 by Lawer show
Model: Motorola C139
Loading...
Phone not found,

the phone if turned on or off ???


With Rocker Dongle v.1.21
Check if phone already booted
Power ON phone shortly
Boot Loading Error

PortalGSM

Please, help C139 Tacfone v 8.8.17