Announcement

Collapse
No announcement yet.

What is the solution for S-BLANK mode phones

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What is the solution for S-BLANK mode phones

    I got v3 i tried with tp and without Tp but my phone detect as S-blank mode always...The phone came with light only on keyboard...

    Any solution for this,..............

  • #2
    not only software can be.
    hardware also.
    also can be other platform flashed in your phone.
    usualy help also first write monster and after make repair.

    Comment


    • #3
      when i try to write monster file

      its stops at writing data (10080000-100800C7) screen getting faded white color..wht could be the hw fault

      Comment


      • #4
        had same problems..in my case was hardware damage....
        the original is here !
        www.rockerdongle.com
        my one is here !
        www.gsm-service.de

        ęby phone-company

        Comment


        • #5
          Originally posted by sharaz191 View Post
          when i try to write monster file

          its stops at writing data (10080000-100800C7) screen getting faded white color..wht could be the hw fault
          first try connect phone with TP and write flash
          if not help try reball or rehot cpu and flash ic.
          and use some lower rocker version,not 2.15.

          Comment


          • #6
            Originally posted by orbita View Post
            first try connect phone with TP and write flash
            if not help try reball or rehot cpu and flash ic.
            and use some lower rocker version,not 2.15.
            what wrong with 2.15 version? is there a bug ?

            Comment


            • #7
              Originally posted by orbita View Post
              not only software can be.
              hardware also.
              also can be other platform flashed in your phone.
              usualy help also first write monster and after make repair.

              This is impossible for him. His phone is in permanent blank mode. That means he cannot flash a monsterpack or any other regular flashfile. Only with an Image/bootloader flash, because bootloader is stored inside the flash. Or bootloader restore.

              Comment


              • #8
                I have the same problem with rockerbox, for V191 and V3 (R347)...I use version 2.14 and 2.15 of motorocker:

                My proccedure was:
                1-
                -Repair pds with TP and without TP
                -Full Flash
                -Repair

                Nothing...cells in blank mode :nonod:

                2
                - Load bootloader and PDS images
                - FullFlash
                -Repair

                Nothing...cells in blank mode :nonod:


                Definitely I need smart-clip...rocker is not good for repair PDS

                Comment


                • #9
                  Originally posted by dacar7 View Post
                  I have the same problem with rockerbox, for V191 and V3 (R347)...I use version 2.14 and 2.15 of motorocker:

                  My proccedure was:
                  1-
                  -Repair pds with TP and without TP
                  -Full Flash
                  -Repair

                  Nothing...cells in blank mode :nonod:

                  2
                  - Load bootloader and PDS images
                  - FullFlash
                  -Repair

                  Nothing...cells in blank mode :nonod:


                  Definitely I need smart-clip...rocker is not good for repair PDS

                  Look like i'm agree with this opinion.

                  @ legija,
                  Please add pds repair features to our lovely box.
                  So i dont have to go to my friend to borrow his Smart-clip, only to repair my phone PDS.

                  Thanks b4
                  br

                  Comment


                  • #10
                    Guys, I think the problem isn't the PDS repair. What I said is correct, install new bootloader to put a new bootloader to the phone. Or Image flash works also. If it doesn't work (phone in blank state) and you used a valid bootloader, it can be a hardware problem, sure. Look around the testpoint for damage.

                    Comment


                    • #11
                      Originally posted by R600 View Post
                      This is impossible for him. His phone is in permanent blank mode. That means he cannot flash a monsterpack or any other regular flashfile. Only with an Image/bootloader flash, because bootloader is stored inside the flash. Or bootloader restore.
                      exist many reason for blank mode.
                      in some cases phone refuse write flash(give write error in some addres)or some like this.
                      this can be hardware or software problem.
                      if you connect phone with TP and write full backup(include also bootcore) in some cases you can write this one(without write error).
                      in some cases help only monster pack.
                      just try and see.
                      for example try get one phone and make prepare cicle with other tool or write some files in this phone(search in this forum and you will find).
                      phone become blank.
                      OK,from this step try and see.
                      and after post here please how it's work for you.
                      Now other thing,v3i have some diferent platforms.
                      user can try write other not compatible platform in phone(in v3i).
                      result is?
                      repair for example write in phone also bootcore.
                      if you make TP and make repair,software write bootcore also in phone.
                      try and see,you will have surprises.
                      in some cases repair not help.
                      need write first full or monster if phone accept and after make repair.

                      Comment


                      • #12
                        Originally posted by R600 View Post
                        Guys, I think the problem isn't the PDS repair. What I said is correct, install new bootloader to put a new bootloader to the phone. Or Image flash works also. If it doesn't work (phone in blank state) and you used a valid bootloader, it can be a hardware problem, sure. Look around the testpoint for damage.

                        if TP is shorted to gnd software give unknow flash id.
                        if you have TP damaged you can read/write without problem.
                        but phone always stay in blank mode.
                        sharaz191 have write problem.
                        here can be other hardware or software problem,not TP problem.

                        Comment


                        • #13
                          Originally posted by orbita View Post
                          exist many reason for blank mode.
                          I told no reason. We write here about the solution.
                          Originally posted by orbita View Post
                          this can be hardware or software problem.
                          That can always be a hardware problem, nothing new.
                          Originally posted by orbita View Post
                          if you connect phone with TP and write full backup(include also bootcore) in some cases you can write this one(without write error).
                          in some cases help only monster pack.
                          just try and see.
                          Not try and see. I write again, it is not possible to flash a Monsterpack or any regular flashfile into a phone in blank state, because there is no bootloader in regular flashfile and you need one. That is a fact. And a backup is what I said with install a new bootloader.
                          Originally posted by orbita View Post
                          repair for example write in phone also bootcore.
                          PDS repair or which repair exactly?
                          Originally posted by orbita View Post
                          if you make TP and make repair,software write bootcore also in phone.
                          try and see,you will have surprises.
                          Which repair? PDS repair doesn't write a new bootloader to bootloader zone.
                          Originally posted by orbita View Post
                          in some cases repair not help.
                          need write first full or monster if phone accept and after make repair.
                          Yes, and you can only flash from flashmode (or normal) but not from blank mode, except bootloader flash.
                          Originally posted by orbita View Post
                          if TP is shorted to gnd software give unknow flash id.
                          if you have TP damaged you can read/write without problem.
                          but phone always stay in blank mode.
                          sharaz191 have write problem.
                          here can be other hardware or software problem,not TP problem.
                          I never said the TP is broken, I wrote around the TP. I hope this is clear. At least, I didn't have you with write problem and stay in blank mode. If the phone stays in blank mode, it is also a write problem (cannot written)
                          Also he had a write problem with flashing on a blank phone, no wonder, this is impossible. I explained why.

                          Comment


                          • #14
                            Originally posted by R600 View Post
                            Which repair? PDS repair doesn't write a new bootloader to bootloader zone.
                            you sure?

                            Originally posted by R600 View Post
                            Yes, and you can only flash from flashmode (or normal) but not from blank mode, except bootloader flash.
                            try connect phone with TP,press connect in rocker.

                            Originally posted by R600 View Post
                            PDS repair or which repair exactly?
                            some new here
                            exist this 2 function in rocker?
                            i know only one and it's called repair.
                            this function make pds repair and rewrite bootcore also.

                            Originally posted by R600 View Post
                            I never said the TP is broken, I wrote around the TP. I hope this is clear. At least, I didn't have you with write problem and stay in blank mode. If the phone stays in blank mode, it is also a write problem (cannot written)
                            Also he had a write problem with flashing on a blank phone, no wonder, this is impossible. I explained why.
                            you sure?
                            and some more,phone write,but not write in specific flash zone.
                            if it's hardware can be problem with flash chip or trace between flash and cpu,not with damaged TP.

                            Comment


                            • #15
                              Originally posted by orbita View Post
                              you sure?
                              Yes, but I'm little bit surprised that you ask me, because this is nothing new for Motorola.
                              Originally posted by orbita View Post
                              try connect phone with TP,press connect in rocker.
                              And then? I see no sense for flashing and your advice here.
                              Originally posted by orbita View Post
                              some new here
                              exist this 2 function in rocker?
                              i know only one and it's called repair.
                              this function make pds repair and rewrite bootcore also.
                              I guess "repair" in Rockerdongle is just PDS repair. You say repair in rockerdongle rewrites the bootloader. Can you prove? Is there a bootloader backup/restore function? Yes it has. edit: After I searched, it seems, yes "Repair" rewrites the bootloader too. It repairs both. Nevertheless, he could try to restore bootcore zone only with valid bootloader and see what happens. Otherwise, it might be a hardware problem.
                              Originally posted by orbita View Post
                              you sure?
                              and some more,phone write,but not write in specific flash zone.
                              if it's hardware can be problem with flash chip or trace between flash and cpu,not with damaged TP.
                              Sure in what?

                              Comment

                              Working...
                              X