Announcement

Collapse
No announcement yet.

A1200 problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A1200 problem

    Before imei repair A1200 it only turn on in flash mode, I upload boot loader and now have problems with touch screen signal and battery. HELP please...

  • #2
    may be you flashed phone with wrong version
    try flashing this version R532L4_G_11.40.0FR and check your touch screen problem , file is in support area

    WBR
    Don't do it if you don't know.. but..... Don't leave it until you know that...

    Comment


    • #3
      I do it, but the problem is same!!! another solution????

      Comment


      • #4
        you've problem with touch screen or other also? it doesn't work or calibration lost? if calibration lost then try recalibrate with radio comm, do try a factory reset also
        Don't do it if you don't know.. but..... Don't leave it until you know that...

        Comment


        • #5
          I have 3 probles, no network, battery and touch screen i flash the phone with L4 firmware and the problem continue...!!!

          Comment


          • #6
            i found there is 4 version of a1200
            A1200 - "R532_G_11.00.xxx" or "R532H2_G_11.20.xxx" (eg: R532_G_11.00.53P, R532H2_G_11.20.06P)
            A1200r -"R532C2_G_11.31.xxx" (eg: R532C2_G_11.31.25P).
            A1200i- "R532L4_G_11.40.xxx" (eg: R532L4_G_11.40.0FR, R532L4_G_11.40.19FR, etc.)
            A1200e -"R541_G_11.51.xxx" (eg: R541_G_11.51.01P, R541_G_11.50.34P, etc.).

            so before flashing phone, be careful to check version
            Don't do it if you don't know.. but..... Don't leave it until you know that...

            Comment


            • #7
              a1200 no signal ,battery and touch screen issue

              flash with 24xp firmware with rsd you can download from HTTP Server Test Page powered by CentOS-WebPanel.com put phone in test mode .The first time you flash it rsd will say phone failed to renumerate don't worry do it again all will be ok after don't forget to use fully charged battery.

              Comment

              Working...
              X