Announcement

Collapse
No announcement yet.

how you can flash your l7/v360/v3i/v3r without batery

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • how you can flash your l7/v360/v3i/v3r without batery

    how you can flash your l7/v360/v3i/v3r without batery

    miniUSB
    1. +5v
    2. data-
    3. data+
    4. short to 1 pins(or use resistor 390k for example).
    5. GND.

    USB - from PC.
    1. +5v
    2. data-
    3. data+
    4. gnd.

    with this you can use phone without batery.
    press # +* and plug cable(phone enter in flash mode)
    or without press phone power normal.

    try and post if work
    for me work

  • #2
    tested by me it works phone will be power up also.. w/o battery
    Don't do it if you don't know.. but..... Don't leave it until you know that...

    Comment


    • #3
      V3r

      Can you please help me with V3r. I'm unable to get the same results. My V3r goes into critical error at 80/40. I was able to debrand it from Cingular to T-mobile but cannot unlock it.

      Comment


      • #4
        what you want to do? if you want to unlock ? then whats the boot version of the phone? 0A.52 not supported without TP.. you must use TP to unlock its phone also if using flash files must support its boot version too.. otherwise will get critical error..
        Don't do it if you don't know.. but..... Don't leave it until you know that...

        Comment


        • #5
          Originally posted by orbita View Post
          how you can flash your l7/v360/v3i/v3r without batery

          miniUSB
          1. +5v
          2. data-
          3. data+
          4. short to 1 pins(or use resistor 390k for example).
          5. GND.

          USB - from PC.
          1. +5v
          2. data-
          3. data+
          4. gnd.

          with this you can use phone without batery.
          press # +* and plug cable(phone enter in flash mode)
          or without press phone power normal.

          try and post if work
          for me work
          master can u post pic for this.Coz i dont understand this short to 1 pins(or use resistor 390k for example).
          Or can u explain more...

          Comment


          • #6
            Thank's For the Info..your the man

            Comment

            Working...
            X