Still learning ... 3 problem as newbie !

[joerg_jb]

Hello guys.. Im still learning with Rocker...
resolved problem (USB Hub) now another problem...


3 more questions:

1: after connecting a Mot. V3
and recognizing phone.. I do click button UNLOCK.. phone switches on and saying:
Boot Loader
0C.F4
SW Version: R3442A_G_0E.43.0AR

OK to Program
USB
Transfer Mode

So what else I have to do ?????????


2: Another thing... If I do have a Mot. V3RE... what modell I have to choose (V3 rEDEGE ??)

3: Some V3 do need Testpoit... How do I do this with V3 ???

Thanks in advance


PS: Now when I click UNLOCK it comes error message: Access denied !! but still goes in Boot Loader at phone

[joerg_jb]

tried with another V3 and this log:

Welcome dear user.
Motorocker version used: 2.28 (Motorola V3, R374)
Package file: NOT SELECTED
Language file: NOT SELECTED
Clicked button: UNLOCK (&Unlock)
Detected motorola interface: Motorola Accessory
Wait for TCI started.
Checking connected interface: Motorola Accessory
Checking connected interface: Motorola MCU Data Logger
Checking connected interface: Motorola Test Command
Waiting for flash interface init...
Detected motorola interface: Motorola Flash
Full bootcore version: 011302FF02000A52
Full firmware version: R3443U2_G_0E.C0.13R:GSVV3xxU5TMB01NA024
Decision: bootcore flashing needed.
Clicked button: PHONE INFO (&Phone info)
Wait for TCI started.
Established connection to: \\.\Motorola USB Modem
Checking connected interface: Motorola Accessory
Checking connected interface: Motorola MCU Data Logger
Checking connected interface: Motorola Test Command
Phone/Platform: V3re
IMEI/SN: 358321019309530
Band: Quad-Band GSM
Firmware version: R3442A_G_0E.43.08R
Language pack: LP_1103
FLEX: GSTRAZR06ATT01NA0DE
Phone code: 1234
Simlock: Present
Bootcore: 00.00
Clicked button: UNLOCK (&Unlock)
Detected motorola interface: Motorola Accessory
Wait for TCI started.
Checking connected interface: Motorola Accessory
Checking connected interface: Motorola MCU Data Logger
Checking connected interface: Motorola Test Command
Waiting for flash interface init...
Detected motorola interface: Motorola Flash
Full bootcore version: 011302FF00000CC1
Full firmware version: R3442A_G_0E.43.08R:GSTRAZR06ATT01NA0DE
Decision: bootcore flashing needed.


Phone starts in Boot loader 0C.C1
and comes: ACCESS DENIED in Program windos.......

[joerg_jb]

Now a bit further but....
STUCK IN UPLOADING RAMLOADERLOADER 8.29

log file:
Welcome dear user.
Motorocker version used: 2.28
Selected: Motorola V3, firmware: R374
Current language: Rocker
Clicked button: PHONE INFO (&Phone info)
Wait for TCI started.
Established connection to: \\.\Motorola USB Modem
Checking connected interface: Motorola Accessory
Checking connected interface: Motorola MCU Data Logger
Checking connected interface: Motorola Test Command
Phone/Platform: V3re
IMEI/SN: 358321019309530
Band: Quad-Band GSM
Firmware version: R3442A_G_0E.43.08R
Language pack: LP_1103
FLEX: GSTRAZR06ATT01NA0DE
Phone code: 1234
Simlock: Present
Bootcore: 00.00
Clicked button: UNLOCK (&Unlock)
Detected motorola interface: Motorola Accessory
Wait for TCI started.
Checking connected interface: Motorola Accessory
Checking connected interface: Motorola MCU Data Logger
Checking connected interface: Motorola Test Command
Waiting for flash interface init...
Detected motorola interface: Motorola Flash
Full bootcore version: 011302FF00000CC1
Full firmware version: R3442A_G_0E.43.08R:GSTRAZR06ATT01NA0DE
Decision: bootcore flashing needed.
Full bootcore version: 011302FF00000CC1
Full firmware version: R3442A_G_0E.43.08R:GSTRAZR06ATT01NA0DE
Uploading ramloader of version: 08.29

and doing nothing ...........................

[Legija]

This is V3 re phone, and for this You need to use an ExTPoint cable.
Reading help file from the Rocker SW will help.

[joerg_jb]

OK I do have the ExTP cable, but how to use it ?