ODM Rocker v1.34 ZN200 code reader, W388/W396/W397 direct unlock !

[imota]

Prvi je fajl iz ispravna,a drugi iz mobitela kojeg nije uspio odraditi,več se neda upaliti.Oba su u Zipu.Pozdrav

[Legija]

Prvi je fajl iz ispravna,a drugi iz mobitela kojeg nije uspio odraditi,več se neda upaliti.Oba su u Zipu.Pozdrav

Ok, thanks.

Check PM, fix is there.

[fonefun]

hi,

i managed to get it to go threough and unlock all writes but phone not power on

also now i cant connect to 2 phones one dead and one live

keep getting baudrate not supported

tried in box and in adapter on com 8

tried all speeds too

any ideas?

[Legija]

Ofcourse, You're lamer.

Contact me on sonork, please.

[imota]

Thanks

Hvala puno
Radi..

[Legija]

Ok, here is another version, with some small fixes.

- Will not continue operation if "phone not answer" is received
- Repair firmware for those who dont read this forum

To unlock phone, press "Unlock".
To repair phone killed by faulty box interface connect phone, select FW and write this file.

Those who havent modified faulty boxes, must use supplied pl2303 adaptor, or modify box according to schematics posted MONTHS ago.

[schumacher]

j132

Evo i ja riješio problem.
Puno hvala, stvarno si broj 1:yesnod:

[Cidji34]

Hi legija, you sent me this... so could I unlock W980 with these instructions, too? (little bit afraid about the how-to...)

[fonefun]

i cant connect to phone now, i am using prolific adapter too

i get the following no matter which speed i use

Check if phone already booted
Power ON phone shortly
Searching device ...
Phone found
Sending signature
Sending boot
Sending signature
Boot sent
Boot Succesfully Loaded
Baud rate not supported 02-0xFF

am getting this on a live phone too

Check if phone already booted
Power ON phone shortly
Searching device ...
Phone found
Sending signature
Sending boot
Sending signature
Boot sent
Boot Succesfully Loaded
Baud rate not supported 01

[fonefun]

hi,

now i have tried on com1 using vygis com-rj45 port

still i get same problem

Check if phone already booted
Power ON phone shortly
Searching device ...
Phone found
Sending signature
Sending boot
Sending signature
Boot sent
Boot Succesfully Loaded
Baud rate not supported 01

[ODMSupport]

peoples! 10000 times already told. NEW LOCOSTO PHONES IMPOSSIBLE TO CONNECT WITH USUAL SERIAL PORT!
cos boot algo use high speed.
ONLY USB CABLES SUITABLE FOR CONNECT.
so please stop ask stupid questions about -"why i cant connect xxxx phone with COM1"
answer always same : "PLEASE USE USB CABLE FOR THIS!!!!"

[fonefun]

ive manged to connect via prolific usb - rj45 on com 8, i had to turn port speed down in device manager to 9600 and set rocker odm soft to 115200 and it connects a treat

ive unlocked one handset

but the previous handset i killed unlocking via narry box has flashed with the fix, but still remains dead.

any ideas?

[Cidji34]

W980 unlock

Hi legija, you (or forum) sent me this... so could I unlock W980 with these instructions, too? (little bit afraid about the how-to...)

I might have put a stupid question... or nobody knows? (confirm if ^^)

[Hamas]

Hello

I might have put a stupid question... or nobody knows? (confirm if ^^)

Friend!
You put the question if Rocker Unlock Sony Ericsson w980?
Confirm if is this.
But..If is I tell you this:
This Phone is A2 model, this phone you only Unlock in Setools but By Logs.
Or unlock in Cruiser By Logs.
Unlock this model is not free in any Box.
But Rocker don't support this Model.
Only Setools, Or Cruiser, or Universal Box, or MT-Box.
But is not Free unlock lick Ex w880 et.
BR
Hassan

[ODMSupport]

ive manged to connect via prolific usb - rj45 on com 8, i had to turn port speed down in device manager to 9600 and set rocker odm soft to 115200 and it connects a treat

ive unlocked one handset

but the previous handset i killed unlocking via narry box has flashed with the fix, but still remains dead.

any ideas?

contact me by PM