muy buena actualizacion
Announcement
Collapse
No announcement yet.
ODM Rocker v1.34 ZN200 code reader, W388/W396/W397 direct unlock !
Collapse
This topic is closed.
X
This is a sticky topic.
X
X
-
SE T303 full readed
Boot Succesfully Loaded
Locosto HS
Flash: Intel RD384060MOY3CE 32 MB
Flash size : 33554432
FW version : R2BA005_1209-8174
LP version : 1210-2299_R4A
IMEI : FFFFFFFFFFFFFFFF
orginal imei: 355754021897866
Comment
-
ODM Rocker 1.28 RC4 - J132 Unlock, World first !
Hi,
This is release candidate 2.
Whats new:
- Added flashing for T250, T250i etc
- Added flashing for R300,
- Added flashing for T280
If You want to change language, just reflash FW part. Take note, DO NOT leave "Full" option checked.
Flash files for T250, T280, R300 are ready at support.
To flash phone, use following steps :
- Press "Connect" and wait for boot process to be finished
- Tick "FW" to sellect proper part for flashing
- Open FW file You want to flash
- Press write
DO NOT downgrade firmware, phone will be unoperable. Making FULL backup prior to flashing is recomended.
If phone gets locked after flashing, use ODM_Unlock_v1.20g to unlock it.
If You want to erase user code, flash "Clean_FFS" using "FFS" option.
Please report results here.
Comment
-
17.10.2008 ODM Rocker v1.28 RC3
Whats new:
- Added T303, K300, K330 etc
- Fixed bug when opening flex files
Please keep in mind that this is just test version, there is no guaranty that all features will work properly.
New flash files will be uploaded in short time to support area.
Comment
-
23.10.2008 ODM Rocker v1.28 RC4
Whats new:In order to unlock these phones, You need to build UART cable according to schematics from bellow image. Wire colours from Mini USB cable are important, wire colours on RJ45 cables my be different, so on RJ45 side You need to use pins 2, 3 and 7.- SonyEricsson j132 Unlock
- SonyEricsson j132 Mini USB pinout
To unlock phone follow these steps:
- Power off the phone and connect to cable
- Press "Connect" in software
- Shortly press "Power" button on phone
- Once phone is connected - press "Unlock"
There are two sequences with erasing and writting, make sure to wait for both. Log will look like this :
Code:Check if phone already booted Power ON phone shortly Searching device ... Phone found Sending signature Sending boot Sending signature Boot sent Boot Succesfully Loaded Locosto HS Flash: ST M58WR064FU 8MB Flash size : 8388608 Start unlocking Known FW ... start the bypass Erasing started Erasing finished Writing started Writing finished Erasing started Erasing finished Writing started Writing finished
Comment
-
SE j132 dead
After unlock with ODM Rocker v1.28 RC4 my J132 is dead too.....
I try read FW but say:
Check if phone already booted
Power ON phone shortly
Searching device ...
Phone found
Sending signature
Sending boot
Sending signature
Boot sent
Boot Succesfully Loaded
Locosto HS
Flash: ST M58WR064FU 8MB
Flash size : 8388608
Start reading ...
Phone not answer ...
Reading aborted.
please help
Comment
-
Comment