g532m emmc 16 gb

[cellmod]

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "Q316BB"
Package .............................. BGA
User Area Partition Size ............. 0x0003AB400000 Bytes (14.68 GB)
Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x08, [162] = 0x01
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1 Bit)
Chip Revision ........................ 0.0
Multimedia Card Revision ............. 1.7 (eMMC v5.0)
Serial Number ........................ 0xD10ACCFE
Memory Manufacturing Date ............ April, 2018






No Resurrection Data is available for the eMMC Chip with Capacity = 14,68 GB
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 7,28 GB




after repair still does not work



the phone was flashed by mistake with 8 gb pit








thank

[Legija]

If You know region code You can download latest firmware using samfirm software.
After decryption and extracting, You'll have 4 or 5 files, what you need is bootloader and csc as there is pit packed.
In case that lz4 compression is used, You'll need to extract it using lz4 software.

Or simply tell me region code and I'll prepare repair package.

[cellmod]

hi !



code : UFN Argentina


thank

[Legija]

Ok, i'll prepare all for tomorrow.

[Legija]

Save file to "RepairPacks" folder, select Samsung G532M UBU1ARE1 from list and click resurrection.

If there is no DL mode, use JIG, if again no DL mode bad hardware or wrong model.

[cellmod]

Save file to "RepairPacks" folder, select Samsung G532M UBU1ARE1 from list and click resurrection.

If there is no DL mode, use JIG, if again no DL mode bad hardware or wrong model.

thanks for your help


I have not been lucky with dl mode with jig, it is only recognized by the PC as a USB tek media port
the phone came into my hands working until I flash it, I do not think it has hardware problems, it's very strange

[frankjasmin]

Hi, I've written other posts about this problem with this phone and there is still no solution, sadly mr. Legija can't help us. I've had several phones in this exact condition, dead after flash, and I haven't been able to recover not a single one with this amazing box.

[Legija]

Hi, I've written other posts about this problem with this phone and there is still no solution, sadly mr. Legija can't help us. I've had several phones in this exact condition, dead after flash, and I haven't been able to recover not a single one with this amazing box.

Phone must work if emmc and hw is ok.


It could be that phone is not G532M but other variant converted by some dealers, in that case need to find out which region is originally and flash proper bootloader.

[tecsalta]

muchas gracias