Hi
i am using emmc adapter to connect emmc from j510 but keep getting this error, no modification done to the box. micro usb connected to the adapter.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.54 (RIFFBOX1), JTAG Manager Version: 1.88
Selected Resurrector: [Samsung J510FN ISP V1.0.6474.38684, <RJ-45>, 1 Bit Bus Width (DAT0)]
Connecting to the SD/eMMC Card...ERROR
WARNING: Embedded I/O Voltage is overriden to 3.25V
Set I/O Voltage reads as 3.25V, SD_CLK Frequency is 960 KHz
Connecting to the SD/eMMC Card Failed (ERR[0071], POS[0001])
i am using emmc adapter to connect emmc from j510 but keep getting this error, no modification done to the box. micro usb connected to the adapter.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.54 (RIFFBOX1), JTAG Manager Version: 1.88
Selected Resurrector: [Samsung J510FN ISP V1.0.6474.38684, <RJ-45>, 1 Bit Bus Width (DAT0)]
Connecting to the SD/eMMC Card...ERROR
WARNING: Embedded I/O Voltage is overriden to 3.25V
Set I/O Voltage reads as 3.25V, SD_CLK Frequency is 960 KHz
Connecting to the SD/eMMC Card Failed (ERR[0071], POS[0001])
Comment