Announcement

Collapse
No announcement yet.

pls add samsung j410f

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pls add samsung j410f

    pls add samsung j410am concet with ips pls add
    Last edited by moh@; 09-02-2020, 08:17 PM.

  • #2
    Save file to "Repairpacks" folder.
    Note that you need to use latest firmware to flash after bootloader repair:
    J410FXXS2ATF1
    Attached Files
    ICQ: 299-912-089
    QQ: 1634811353

    Comment


    • #3
      thnx bro

      Comment


      • #4
        ERROR: Selected FLASH Chip was not initialized by the DCC Loader.ERROR

        Comment


        • #5
          Please post full log.
          ICQ: 299-912-089
          QQ: 1634811353

          Comment


          • #6
            Open serial port...OK
            Connecting to the RIFF Box...OK
            Firmware Version: 1.54 (RIFFBOX1), JTAG Manager Version: 1.89
            Selected Package: [Samsung J410F V1.02 by <legija>, <RJ-45>, 1 Bit Bus Width (DAT0)]

            Connecting to the SD/eMMC Card...OK
            Set I/O Voltage reads as 1.79V, SD_CLK Frequency is 960 KHz

            Memory Identification Info

            Memory Type: eMMC
            Manufacturer ID: 0x15 (SAMSUNG)
            OEM/Application ID: 0x00
            Product Name: "000000"
            Package: BGA

            Memory Capacity and Geometry Info

            User Area Partition Size ............. 0x000000000000 Bytes ( 0B)
            Boot Partition Size .................. 0x000000080000 Bytes (512.00 KB)
            RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
            OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
            CID Register ......................... 150100303030303030562016061354D1
            CSD Register ......................... 902701320F5903FFF6DB7FE08A40403B
            Write Protection Bits ................ NONE
            ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x00, [162] = 0x00
            Boot Configuration ................... No Boot
            Max Speed Supported .................. 52MHz
            Chip Revision ........................ 5.6
            Multimedia Card Revision ............. 1.5 (eMMC v4.41)
            Serial Number ........................ 0x20160613
            Memory Manufacturing Date ............ June, 2017

            Memory Health Information

            Device life time reflected by Reserved Blocks - PERFECT
            Estimated wear out of MLC Memory - Wear out: 0%, Lifetime remaining: 100%
            Estimated wear out of SLC Memory - Wear out: 0%, Lifetime remaining: 100%

            Comment


            • #7
              Click "Resurrection", select "Repair Bootloader".
              If there is some error, post log.
              ICQ: 299-912-089
              QQ: 1634811353

              Comment


              • #8
                Open serial port...OK
                Connecting to the RIFF Box...OK
                Firmware Version: 1.54 (RIFFBOX1), JTAG Manager Version: 1.89
                Selected Package: [Samsung J410F V1.02 by <legija>, <RJ-45>, 1 Bit Bus Width (DAT0)]

                Connecting to the SD/eMMC Card...OK
                Set I/O Voltage reads as 1.80V, SD_CLK Frequency is 960 KHz

                Detected eMMC Chip, ID: 0x15/0x00 (000000), User Area Partition = 0x000000000000 Bytes ( 0B)

                ERROR: Selected FLASH Chip was not initialized by the DCC Loader.ERROR

                Comment


                • #9
                  ----------------------- info froum emmc is no good -----------
                  emmc in j410f = 5.1
                  lire in info
                  Open serial port...OK
                  Connecting to the RIFF Box...OK
                  Firmware Version: 1.54 (RIFFBOX1), JTAG Manager Version: 1.89
                  Selected Package: [Samsung J410F V1.02 by <legija>, <RJ-45>, 1 Bit Bus Width (DAT0)]

                  Connecting to the SD/eMMC Card...OK
                  Set I/O Voltage reads as 1.80V, SD_CLK Frequency is 960 KHz

                  Memory Identification Info

                  Memory Type: eMMC
                  Manufacturer ID: 0x15 (SAMSUNG)
                  OEM/Application ID: 0x00
                  Product Name: "000000"
                  Package: BGA

                  Memory Capacity and Geometry Info

                  User Area Partition Size ............. 0x000000000000 Bytes ( 0B)
                  Boot Partition Size .................. 0x000000080000 Bytes (512.00 KB)
                  RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
                  OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
                  CID Register ......................... 150100303030303030562016061354D1
                  CSD Register ......................... 902701320F5903FFF6DB7FE08A40403B
                  Write Protection Bits ................ NONE
                  ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x00, [162] = 0x00
                  Boot Configuration ................... No Boot
                  Max Speed Supported .................. 52MHz
                  Chip Revision ........................ 5.6
                  Multimedia Card Revision ............. 1.5 (eMMC v4.41)
                  Serial Number ........................ 0x20160613
                  Memory Manufacturing Date ............ June, 2017

                  Memory Health Information

                  Device life time reflected by Reserved Blocks - PERFECT
                  Estimated wear out of MLC Memory - Wear out: 0%, Lifetime remaining: 100%
                  Estimated wear out of SLC Memory - Wear out: 0%, Lifetime remaining: 100%

                  Comment


                  • #10
                    Replace emmc. You could try maybe to update firmware, but I'm not sure if there is firmware for it, as i cant see PNM.
                    ICQ: 299-912-089
                    QQ: 1634811353

                    Comment


                    • #11
                      thnx bro

                      Comment

                      Working...
                      X