pls add samsung j410am concet with ips pls add
Announcement
Collapse
No announcement yet.
pls add samsung j410f
Collapse
X
-
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.54 (RIFFBOX1), JTAG Manager Version: 1.89
Selected Package: [Samsung J410F V1.02 by <legija>, <RJ-45>, 1 Bit Bus Width (DAT0)]
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.79V, SD_CLK Frequency is 960 KHz
Memory Identification Info
Memory Type: eMMC
Manufacturer ID: 0x15 (SAMSUNG)
OEM/Application ID: 0x00
Product Name: "000000"
Package: BGA
Memory Capacity and Geometry Info
User Area Partition Size ............. 0x000000000000 Bytes ( 0B)
Boot Partition Size .................. 0x000000080000 Bytes (512.00 KB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
CID Register ......................... 150100303030303030562016061354D1
CSD Register ......................... 902701320F5903FFF6DB7FE08A40403B
Write Protection Bits ................ NONE
ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x00, [162] = 0x00
Boot Configuration ................... No Boot
Max Speed Supported .................. 52MHz
Chip Revision ........................ 5.6
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x20160613
Memory Manufacturing Date ............ June, 2017
Memory Health Information
Device life time reflected by Reserved Blocks - PERFECT
Estimated wear out of MLC Memory - Wear out: 0%, Lifetime remaining: 100%
Estimated wear out of SLC Memory - Wear out: 0%, Lifetime remaining: 100%
Comment
-
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.54 (RIFFBOX1), JTAG Manager Version: 1.89
Selected Package: [Samsung J410F V1.02 by <legija>, <RJ-45>, 1 Bit Bus Width (DAT0)]
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.80V, SD_CLK Frequency is 960 KHz
Detected eMMC Chip, ID: 0x15/0x00 (000000), User Area Partition = 0x000000000000 Bytes ( 0B)
ERROR: Selected FLASH Chip was not initialized by the DCC Loader.ERROR
Comment
-
----------------------- info froum emmc is no good -----------
emmc in j410f = 5.1
lire in info
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.54 (RIFFBOX1), JTAG Manager Version: 1.89
Selected Package: [Samsung J410F V1.02 by <legija>, <RJ-45>, 1 Bit Bus Width (DAT0)]
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.80V, SD_CLK Frequency is 960 KHz
Memory Identification Info
Memory Type: eMMC
Manufacturer ID: 0x15 (SAMSUNG)
OEM/Application ID: 0x00
Product Name: "000000"
Package: BGA
Memory Capacity and Geometry Info
User Area Partition Size ............. 0x000000000000 Bytes ( 0B)
Boot Partition Size .................. 0x000000080000 Bytes (512.00 KB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
CID Register ......................... 150100303030303030562016061354D1
CSD Register ......................... 902701320F5903FFF6DB7FE08A40403B
Write Protection Bits ................ NONE
ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x00, [162] = 0x00
Boot Configuration ................... No Boot
Max Speed Supported .................. 52MHz
Chip Revision ........................ 5.6
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x20160613
Memory Manufacturing Date ............ June, 2017
Memory Health Information
Device life time reflected by Reserved Blocks - PERFECT
Estimated wear out of MLC Memory - Wear out: 0%, Lifetime remaining: 100%
Estimated wear out of SLC Memory - Wear out: 0%, Lifetime remaining: 100%
Comment
Comment