Announcement

Collapse
No announcement yet.

one plus 6 dead vibrater only

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • one plus 6 dead vibrater only

    one plus 6 dead vibrater only

    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.54 (RIFFBOX1), JTAG Manager Version: 1.88
    Selected Package: [OnePlus 6 V1.00 by <legija>]

    Connecting to the Device via USB Interface...OK

    Initializing Communication via Qualcomm Firehose Protocol...OK
    WARNING: Cannot obtain memory capacity. Assuming default Maximum values.

    Memory Type .......................... UFS
    Manufacturer ID ...................... 0x01CE
    Product Name ......................... "SAMSUNG KLUDG4U1EA-B0C1 0500"
    Partition 0 (LU0) Size ............... 0x000000000000 Bytes (0B)
    Partition 1 (LU1) Size ............... 0x000000000000 Bytes (0B)
    Partition 2 (LU2) Size ............... 0x000000000000 Bytes (0B)
    Partition 3 (LU3) Size ............... 0x000000000000 Bytes (0B)
    Partition 4 (LU4) Size ............... 0x000000000000 Bytes (0B)
    Partition 5 (LU5) Size ............... 0x000000000000 Bytes (0B)

    log from plugin

    Connecting to the Device via USB Interface...OK
    Serial Number: [9D8BB33C], MSM H/W ID: [0051459B/0008B0E1], PK HASH: [DD7C5F2E53176BEE]

    Initializing Communication via Qualcomm Firehose Protocol...OK
    WARNING: Cannot obtain memory capacity. Assuming default Maximum values.

    Detected UFS Chip, ID: 0x01CE (SAMSUNG KLUDG4U1EA-B0C1 0500), LU0 Size = 0x000000000000 Bytes (0B)

    Analizing the FullImage File:
    Looking for the MBR Signature ................... NOT FOUND
    Looking for the GPT Signature ................... NOT FOUND
    Looking for the PIT Signature ................... NOT FOUND
    Looking for the MPT Signature ................... NOT FOUND
    Looking for the Tegra Signature ................. ERROR
    Selected partition is not available in connected memory chip.

    ERROR: Failed to read data from the connected Device!





  • #2
    This looks like dead chip. Just in case there is something wrong with software, please do this:

    Switch to USB tab,
    click check memory twice, then click "advanced log window" and copy content here.
    ICQ: 299-912-089
    QQ: 1634811353

    Comment


    • #3
      [configure log] value = "End of supported functions 16"
      [configure log] value = "Storage type set to value UFS"
      [configure log] value = "WARN: NAK: MaxPayloadSizeToTargetInBytes sent by host -1 larger than supported 1048576"
      [configure log] value = "DEBUG: Calling usb_al_bulk_set_zlp_mode(TRUE), zlp is not set to 0"
      [configure response] value = "NAK"
      [configure response] MemoryName = "UFS"
      [configure response] MinVersionSupported = "1"
      [configure response] Version = "1"
      [configure response] MaxPayloadSizeToTargetInBytes = "1048576"
      [configure response] MaxPayloadSizeToTargetInBytesSupported = "1048576"
      [configure response] MaxXMLSizeInBytes = "4096"
      [configure response] DateTime = "May 17 2018 - 22:11:54"
      [configure log] value = "Storage type set to value UFS"
      [configure log] value = "DEBUG: Calling usb_al_bulk_set_zlp_mode(TRUE), zlp is not set to 0"
      [configure response] value = "ACK"
      [configure response] MemoryName = "UFS"
      [configure response] MinVersionSupported = "1"
      [configure response] Version = "1"
      [configure response] MaxPayloadSizeToTargetInBytes = "1048576"
      [configure response] MaxPayloadSizeToTargetInBytesSupported = "1048576"
      [configure response] MaxXMLSizeInBytes = "4096"
      [configure response] DateTime = "May 17 2018 - 22:11:54"
      [getstorageinfo log] value = "UFS fInitialized: 0x1"
      [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
      [getstorageinfo log] value = "UFS Total Active LU: 0x6"
      [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
      [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
      [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
      [getstorageinfo log] value = "UFS Min Block Size: 0x8"
      [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
      [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
      [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
      [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
      [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
      [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
      [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
      [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
      [getstorageinfo log] value = "UFS Memory Type: 0x0"
      [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
      [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
      [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
      [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
      [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
      [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
      [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
      [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
      [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
      [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
      [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
      [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
      [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
      [getstorageinfo response] value = "ACK"
      [getstorageinfo response] rawmode = "false"
      [getstorageinfo log] value = "UFS fInitialized: 0x1"
      [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
      [getstorageinfo log] value = "UFS Total Active LU: 0x6"
      [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
      [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
      [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
      [getstorageinfo log] value = "UFS Min Block Size: 0x8"
      [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
      [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
      [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
      [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
      [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
      [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
      [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
      [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
      [getstorageinfo log] value = "UFS Memory Type: 0x0"
      [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
      [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
      [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
      [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
      [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
      [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
      [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
      [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
      [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
      [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
      [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
      [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
      [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
      [getstorageinfo response] value = "ACK"
      [getstorageinfo response] rawmode = "false"
      [getstorageinfo log] value = "UFS fInitialized: 0x1"
      [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
      [getstorageinfo log] value = "UFS Total Active LU: 0x6"
      [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
      [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
      [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
      [getstorageinfo log] value = "UFS Min Block Size: 0x8"
      [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
      [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
      [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
      [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
      [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
      [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
      [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
      [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
      [getstorageinfo log] value = "UFS Memory Type: 0x0"
      [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
      [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
      [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
      [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
      [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
      [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
      [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
      [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
      [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
      [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
      [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
      [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
      [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
      [getstorageinfo response] value = "ACK"
      [getstorageinfo response] rawmode = "false"
      [getstorageinfo log] value = "UFS fInitialized: 0x1"
      [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
      [getstorageinfo log] value = "UFS Total Active LU: 0x6"
      [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
      [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
      [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
      [getstorageinfo log] value = "UFS Min Block Size: 0x8"
      [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
      [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
      [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
      [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
      [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
      [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
      [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
      [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
      [getstorageinfo log] value = "UFS Memory Type: 0x0"
      [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
      [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
      [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
      [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
      [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
      [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
      [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
      [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
      [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
      [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
      [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
      [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
      [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
      [getstorageinfo response] value = "ACK"
      [getstorageinfo response] rawmode = "false"
      [getstorageinfo log] value = "UFS fInitialized: 0x1"
      [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
      [getstorageinfo log] value = "UFS Total Active LU: 0x6"
      [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
      [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
      [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
      [getstorageinfo log] value = "UFS Min Block Size: 0x8"
      [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
      [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
      [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
      [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
      [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
      [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
      [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
      [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
      [getstorageinfo log] value = "UFS Memory Type: 0x0"
      [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
      [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
      [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
      [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
      [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
      [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
      [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
      [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
      [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
      [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
      [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
      [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
      [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
      [getstorageinfo response] value = "ACK"
      [getstorageinfo response] rawmode = "false"
      [getstorageinfo log] value = "UFS fInitialized: 0x1"
      [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
      [getstorageinfo log] value = "UFS Total Active LU: 0x6"
      [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
      [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
      [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
      [getstorageinfo log] value = "UFS Min Block Size: 0x8"
      [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
      [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
      [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
      [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
      [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
      [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
      [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
      [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
      [getstorageinfo log] value = "UFS Memory Type: 0x0"
      [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
      [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
      [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
      [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
      [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
      [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
      [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
      [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
      [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
      [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
      [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
      [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
      [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
      [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
      [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
      [getstorageinfo response] value = "ACK"
      [getstorageinfo response] rawmode = "false"
      [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
      [read log] value = "DEBUG: Can't decode attribute last_sector with value "
      [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
      [read log] value = "DEBUG: Can't decode attribute get_spare with value "
      [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
      [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
      [read response] value = "NAK"
      [read response] rawmode = "false"
      [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
      [read log] value = "DEBUG: Can't decode attribute last_sector with value "
      [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
      [read log] value = "DEBUG: Can't decode attribute get_spare with value "
      [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
      [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
      [read response] value = "NAK"
      [read response] rawmode = "false"
      [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
      [read log] value = "DEBUG: Can't decode attribute last_sector with value "
      [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
      [read log] value = "DEBUG: Can't decode attribute get_spare with value "
      [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
      [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
      [read response] value = "NAK"
      [read response] rawmode = "false"
      [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
      [read log] value = "DEBUG: Can't decode attribute last_sector with value "
      [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
      [read log] value = "DEBUG: Can't decode attribute get_spare with value "
      [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
      [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
      [read response] value = "NAK"
      [read response] rawmode = "false"
      [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
      [read log] value = "DEBUG: Can't decode attribute last_sector with value "
      [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
      [read log] value = "DEBUG: Can't decode attribute get_spare with value "
      [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
      [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
      [read response] value = "NAK"
      [read response] rawmode = "false"
      [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
      [read log] value = "DEBUG: Can't decode attribute last_sector with value "
      [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
      [read log] value = "DEBUG: Can't decode attribute get_spare with value "
      [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
      [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
      [read response] value = "NAK"
      [read response] rawmode = "false"

      Comment


      • #4
        Ok, please replace riffpkg file with this one and repeat check/advanced log.
        Attached Files
        ICQ: 299-912-089
        QQ: 1634811353

        Comment


        • #5
          [configure log] value = "sha256final"
          [configure log] value = "End of supported functions 16"
          [configure log] value = "Storage type set to value UFS"
          [configure log] value = "WARN: NAK: MaxPayloadSizeToTargetInBytes sent by host -1 larger than supported 1048576"
          [configure log] value = "DEBUG: Calling usb_al_bulk_set_zlp_mode(TRUE), zlp is not set to 0"
          [configure response] value = "NAK"
          [configure response] MemoryName = "UFS"
          [configure response] MinVersionSupported = "1"
          [configure response] Version = "1"
          [configure response] MaxPayloadSizeToTargetInBytes = "1048576"
          [configure response] MaxPayloadSizeToTargetInBytesSupported = "1048576"
          [configure response] MaxXMLSizeInBytes = "4096"
          [configure response] DateTime = "May 17 2018 - 22:11:54"
          [configure log] value = "Storage type set to value UFS"
          [configure log] value = "DEBUG: Calling usb_al_bulk_set_zlp_mode(TRUE), zlp is not set to 0"
          [configure response] value = "ACK"
          [configure response] MemoryName = "UFS"
          [configure response] MinVersionSupported = "1"
          [configure response] Version = "1"
          [configure response] MaxPayloadSizeToTargetInBytes = "1048576"
          [configure response] MaxPayloadSizeToTargetInBytesSupported = "1048576"
          [configure response] MaxXMLSizeInBytes = "4096"
          [configure response] DateTime = "May 17 2018 - 22:11:54"
          [getstorageinfo log] value = "UFS fInitialized: 0x1"
          [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
          [getstorageinfo log] value = "UFS Total Active LU: 0x6"
          [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
          [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
          [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
          [getstorageinfo log] value = "UFS Min Block Size: 0x8"
          [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
          [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
          [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
          [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
          [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
          [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
          [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
          [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
          [getstorageinfo log] value = "UFS Memory Type: 0x0"
          [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
          [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
          [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
          [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
          [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
          [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
          [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
          [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
          [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
          [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
          [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
          [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
          [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
          [getstorageinfo response] value = "ACK"
          [getstorageinfo response] rawmode = "false"
          [getstorageinfo log] value = "UFS fInitialized: 0x1"
          [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
          [getstorageinfo log] value = "UFS Total Active LU: 0x6"
          [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
          [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
          [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
          [getstorageinfo log] value = "UFS Min Block Size: 0x8"
          [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
          [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
          [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
          [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
          [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
          [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
          [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
          [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
          [getstorageinfo log] value = "UFS Memory Type: 0x0"
          [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
          [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
          [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
          [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
          [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
          [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
          [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
          [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
          [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
          [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
          [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
          [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
          [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
          [getstorageinfo response] value = "ACK"
          [getstorageinfo response] rawmode = "false"
          [getstorageinfo log] value = "UFS fInitialized: 0x1"
          [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
          [getstorageinfo log] value = "UFS Total Active LU: 0x6"
          [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
          [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
          [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
          [getstorageinfo log] value = "UFS Min Block Size: 0x8"
          [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
          [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
          [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
          [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
          [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
          [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
          [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
          [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
          [getstorageinfo log] value = "UFS Memory Type: 0x0"
          [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
          [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
          [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
          [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
          [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
          [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
          [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
          [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
          [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
          [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
          [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
          [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
          [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
          [getstorageinfo response] value = "ACK"
          [getstorageinfo response] rawmode = "false"
          [getstorageinfo log] value = "UFS fInitialized: 0x1"
          [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
          [getstorageinfo log] value = "UFS Total Active LU: 0x6"
          [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
          [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
          [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
          [getstorageinfo log] value = "UFS Min Block Size: 0x8"
          [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
          [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
          [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
          [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
          [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
          [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
          [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
          [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
          [getstorageinfo log] value = "UFS Memory Type: 0x0"
          [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
          [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
          [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
          [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
          [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
          [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
          [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
          [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
          [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
          [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
          [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
          [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
          [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
          [getstorageinfo response] value = "ACK"
          [getstorageinfo response] rawmode = "false"
          [getstorageinfo log] value = "UFS fInitialized: 0x1"
          [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
          [getstorageinfo log] value = "UFS Total Active LU: 0x6"
          [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
          [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
          [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
          [getstorageinfo log] value = "UFS Min Block Size: 0x8"
          [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
          [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
          [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
          [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
          [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
          [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
          [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
          [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
          [getstorageinfo log] value = "UFS Memory Type: 0x0"
          [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
          [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
          [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
          [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
          [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
          [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
          [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
          [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
          [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
          [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
          [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
          [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
          [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
          [getstorageinfo response] value = "ACK"
          [getstorageinfo response] rawmode = "false"
          [getstorageinfo log] value = "UFS fInitialized: 0x1"
          [getstorageinfo log] value = "UFS Current LUN Number: = 0xd0"
          [getstorageinfo log] value = "UFS Total Active LU: 0x6"
          [getstorageinfo log] value = "UFS wManufacturerID: 0x1ce"
          [getstorageinfo log] value = "UFS Boot Partition Enabled: 0x1"
          [getstorageinfo log] value = "UFS Raw Device Capacity: = 0xee64000"
          [getstorageinfo log] value = "UFS Min Block Size: 0x8"
          [getstorageinfo log] value = "UFS Erase Block Size: 0x2000"
          [getstorageinfo log] value = "UFS Allocation Unit Size: 0x1"
          [getstorageinfo log] value = "UFS RPMB ReadWrite Size: = 0x40"
          [getstorageinfo log] value = "UFS Number of Allocation Uint for This LU: 0x0"
          [getstorageinfo log] value = "UFS Logical Block Size: 0x0"
          [getstorageinfo log] value = "UFS Provisioning Type: 0x0"
          [getstorageinfo log] value = "UFS LU Write Protect: 0x0"
          [getstorageinfo log] value = "UFS Boot LUN ID: = 0x0"
          [getstorageinfo log] value = "UFS Memory Type: 0x0"
          [getstorageinfo log] value = "UFS LU Total Blocks: 0x0"
          [getstorageinfo log] value = "UFS Supported Memory Types: 0x800f"
          [getstorageinfo log] value = "UFS dEnhanced1MaxNAllocU: 0x7732"
          [getstorageinfo log] value = "UFS wEnhanced1CapAdjFac: 0x300"
          [getstorageinfo log] value = "UFS dEnhanced2MaxNAllocU: = 0x0"
          [getstorageinfo log] value = "UFS wEnhanced2CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced3MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced3CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS dEnhanced4MaxNAllocU: 0x0"
          [getstorageinfo log] value = "UFS wEnhanced4CapAdjFac: 0x0"
          [getstorageinfo log] value = "UFS LUN Enable Bitmask: 0x3f"
          [getstorageinfo log] value = "UFS Logical Block Count: 0x0"
          [getstorageinfo log] value = "UFS bConfigDescrLock: 0x0"
          [getstorageinfo log] value = "UFS iManufacturerName String Index: 0x0"
          [getstorageinfo log] value = "UFS iProductName String Index: 0x1"
          [getstorageinfo log] value = "UFS iSerialNumber String Index: 0x2"
          [getstorageinfo log] value = "UFS iOemID String Index: 0x3"
          [getstorageinfo log] value = "UFS Inquiry Command Output: SAMSUNG KLUDG4U1EA-B0C1 0500 "
          [getstorageinfo response] value = "ACK"
          [getstorageinfo response] rawmode = "false"
          [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
          [read log] value = "DEBUG: Can't decode attribute last_sector with value "
          [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
          [read log] value = "DEBUG: Can't decode attribute get_spare with value "
          [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
          [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
          [read response] value = "NAK"
          [read response] rawmode = "false"
          [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
          [read log] value = "DEBUG: Can't decode attribute last_sector with value "
          [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
          [read log] value = "DEBUG: Can't decode attribute get_spare with value "
          [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
          [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
          [read response] value = "NAK"
          [read response] rawmode = "false"
          [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
          [read log] value = "DEBUG: Can't decode attribute last_sector with value "
          [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
          [read log] value = "DEBUG: Can't decode attribute get_spare with value "
          [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
          [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
          [read response] value = "NAK"
          [read response] rawmode = "false"
          [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
          [read log] value = "DEBUG: Can't decode attribute last_sector with value "
          [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
          [read log] value = "DEBUG: Can't decode attribute get_spare with value "
          [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
          [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
          [read response] value = "NAK"
          [read response] rawmode = "false"
          [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
          [read log] value = "DEBUG: Can't decode attribute last_sector with value "
          [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
          [read log] value = "DEBUG: Can't decode attribute get_spare with value "
          [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
          [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
          [read response] value = "NAK"
          [read response] rawmode = "false"
          [read log] value = "DEBUG: Can't decode attribute read_back_verify with value "
          [read log] value = "DEBUG: Can't decode attribute last_sector with value "
          [read log] value = "DEBUG: Can't decode attribute skip_bad_block with value "
          [read log] value = "DEBUG: Can't decode attribute get_spare with value "
          [read log] value = "DEBUG: Can't decode attribute ecc_disabled with value "
          [read log] value = "ERROR: sector size defined in XML (0) different from device sector size (4096)"
          [read response] value = "NAK"
          [read response] rawmode = "false"

          Comment


          • #6
            OK now replace exe with this one and repeat the test.
            Attached Files
            ICQ: 299-912-089
            QQ: 1634811353

            Comment

            Working...
            X