Announcement

Collapse
No announcement yet.

micromax q372

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    micromax q372

    need micromax q372 isp riffpkg or dump

    device condition dead


    Selected Manual Mode: [Qualcomm DMSS, External Binary Format File, MediaTek DA]

    Connecting to the SD/eMMC Card...OK
    Set I/O Voltage reads as 3.05V, SD_CLK Frequency is 828 KHz

    Memory Identification Info

    Memory Type: eMMC
    Manufacturer ID: 0x90 (HYNIX)
    OEM/Application ID: 0x4A
    Product Name: "H8G2d "
    Package: BGA

    Memory Capacity and Geometry Info

    User Area Partition Size ............. 0x0001D2000000 Bytes (7.28 GB)
    Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
    RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
    OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
    CID Register ......................... 90014A4838473264040504A2D1B2124F
    CSD Register ......................... D02701320F5903FFFFFFFFEF8A4040D3
    Write Protection Bits ................ NONE
    ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x48, [162] = 0x01
    Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1 Bit)
    Chip Revision ........................ 0.5
    Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
    Serial Number ........................ 0x04A2D1B2
    Memory Manufacturing Date ............ February, 2015

    Memory Health Information

    Device life time reflected by Reserved Blocks - PERFECT
    Estimated wear out of MLC Memory - Wear out: 0%, Lifetime remaining: 100%
    Estimated wear out of SLC Memory - Wear out: 0%, Lifetime remaining: 100%
    Tags: None
  • #2
    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.53 (RIFFBOX1), JTAG Manager Version: 1.87
    Selected Manual Mode: [Qualcomm DMSS, External Binary Format File, MediaTek DA]

    Connecting to the SD/eMMC Card...OK
    Set I/O Voltage reads as 3.05V, SD_CLK Frequency is 2.50 MHz

    Detected eMMC Chip, ID: 0x90/0x4A (H8G2d ), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

    Analizing the FullImage File:
    Looking for the MBR Signature ................... NOT FOUND
    Looking for the GPT Signature ................... NOT FOUND
    Looking for the PIT Signature ................... NOT FOUND
    Looking for the MPT Signature ................... NOT FOUND
    Looking for the Tegra Signature ................. NOT FOUND
    Looking for the MTK REL Partition Table ......... NOT FOUND
    Looking for the MTK PMT Partition Table ......... NOT FOUND

    WARNING: Cannot detect Layout. Neighter MBR/EBR, nor PIT, nor EFI nor MTK. Loading as standalone File.

    Current Phone/Image File is recognized to have the EFI Layout.
    Total quantity of listed partitions: 1

    Initializing Temporary Storage File for Boot Area Partition 1...OK

    Analizing partition contents complete.



    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.53 (RIFFBOX1), JTAG Manager Version: 1.87
    Selected Manual Mode: [Qualcomm DMSS, External Binary Format File, MediaTek DA]

    Connecting to the SD/eMMC Card...OK
    Set I/O Voltage reads as 3.05V, SD_CLK Frequency is 2.50 MHz

    Detected eMMC Chip, ID: 0x90/0x4A (H8G2d ), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

    Analizing the FullImage File:
    Looking for the MBR Signature ................... NOT FOUND
    Looking for the GPT Signature ................... NOT FOUND
    Looking for the PIT Signature ................... NOT FOUND
    Looking for the MPT Signature ................... NOT FOUND
    Looking for the Tegra Signature ................. NOT FOUND
    Looking for the MTK REL Partition Table ......... NOT FOUND
    Looking for the MTK PMT Partition Table ......... NOT FOUND

    WARNING: Cannot detect Layout. Neighter MBR/EBR, nor PIT, nor EFI nor MTK. Loading as standalone File.

    Current Phone/Image File is recognized to have the EFI Layout.
    Total quantity of listed partitions: 1

    Initializing Temporary Storage File for Boot Area Partition 2...OK

    Analizing partition contents complete.



    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.53 (RIFFBOX1), JTAG Manager Version: 1.87
    Selected Manual Mode: [Qualcomm DMSS, External Binary Format File, MediaTek DA]

    Connecting to the SD/eMMC Card...OK
    Set I/O Voltage reads as 3.05V, SD_CLK Frequency is 2.50 MHz

    Detected eMMC Chip, ID: 0x90/0x4A (H8G2d ), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

    Analizing the FullImage File:
    Looking for the MBR Signature ................... NOT FOUND
    Looking for the GPT Signature ................... NOT FOUND
    Looking for the PIT Signature ................... NOT FOUND
    Looking for the MPT Signature ................... NOT FOUND
    Looking for the Tegra Signature ................. NOT FOUND
    Looking for the MTK REL Partition Table ......... NOT FOUND
    Looking for the MTK PMT Partition Table ......... NOT FOUND

    WARNING: Cannot detect Layout. Neighter MBR/EBR, nor PIT, nor EFI nor MTK. Loading as standalone File.

    Current Phone/Image File is recognized to have the EFI Layout.
    Total quantity of listed partitions: 1

    Initializing Temporary Storage File for User Area Partition...OK

    Analizing partition contents complete.
    Last edited by s.jafer; 05-08-2020, 12:59 PM.

    Comment

    • #3
      You can flash this phone with SP Flash Tool, use format all + download option.
      And, there is already ISP DLL for this model. Just download it.
      Last edited by Legija; 05-08-2020, 01:20 PM.
      ICQ: 299-912-089
      QQ: 1634811353
      • 2 likes

      Comment

      • #4
        already flash with all option now preloder not detect because i remove emmc connect direct isp with jumber i posted logs

        Comment

        • #5
          Perform emmc write test on advanced page. Possibly emmc is bad, or there is other hw problem if preloader is not active.
          ICQ: 299-912-089
          QQ: 1634811353
          • 1 like

          Comment

          • #6
            Open serial port...OK
            Connecting to the RIFF Box...OK
            Firmware Version: 1.53 (RIFFBOX1), JTAG Manager Version: 1.87
            Selected Resurrector: [Micromax Q372 ISP V1.0.6765.11596, <RJ-45>, 1 Bit Bus Width (DAT0)]

            Connecting to the SD/eMMC Card...OK
            WARNING: Embedded I/O Voltage is overriden to 2.80V
            Set I/O Voltage reads as 2.80V, SD_CLK Frequency is 960 KHz

            Detected eMMC Chip, ID: 0x90/0x4A (H8G2d ), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

            Preforming eMMC Write at test address 0x0001D1FF8000...ERROR
            ERROR: Write test Failed!!! Written pattern did not pass verify stage.

            Comment

            • #7
              Maybe you can save it, on advanced page click Configure GP partitions, and set size for one at 128MB. After that, reset chip power and retry write test again.
              ICQ: 299-912-089
              QQ: 1634811353
              • 1 like

              Comment

              • #8
                Open serial port...OK
                Connecting to the RIFF Box...OK
                Firmware Version: 1.53 (RIFFBOX1), JTAG Manager Version: 1.87
                Selected Resurrector: [Micromax Q372 ISP V1.0.6765.11596, <RJ-45>, 1 Bit Bus Width (DAT0)]

                Connecting to the SD/eMMC Card...OK
                WARNING: Embedded I/O Voltage is overriden to 2.80V
                Set I/O Voltage reads as 2.80V, SD_CLK Frequency is 960 KHz

                Detected eMMC Chip, ID: 0x90/0x4A (H8G2d ), User Area Partition = 0x0001CA000000 Bytes (7.16 GB)

                Preforming eMMC Write at test address 0x0001C9FF8000...OK
                The eMMC Memory Write Test completed with SUCCESS!

                Comment

                Previous template Next
                Working...
                X

                We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                I Agree