Need some help for MTK USB boot

[ravi mobile]

Sir i have gionee p2s which is stuck on logo. i m trying to repair this mobile by mtk usb support accourding to this guide -

Unlock Forum - RIFF Box support forum

i create .riffpkg here is pic -


as we can see in device manager showing mtk vcom port but in riff software showing error

i m sure i m made some mistake please legija sir help me.

here usb tab log -

[ravi mobile]

now something clear but log not hopefully yet -

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.51 (RIFFBOX1), JTAG Manager Version: 1.84
Selected Manual Mode: [MediaTek BOOTROM, DA Pack Version V5.1708]

Connecting to the Device via USB Interface...OK
Initializing Communication via MediaTek Download Agent Protocol...OK

Detected eMMC Chip, ID: 0x15/0x01 (N5XZMB), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Writting "Boot Area Partition 1" memory from 0x000000000000 to 0x000000018FFF (Partition: "PRELOADER")
Completed in 00:00:00.046 (Average Transfer Rate: 2.12 MB/s)

Writting "User Area Partition" memory from 0x0000019A0000 to 0x0000019DCFFF (Partition: "UBOOT")
Completed in 00:00:00.140 (Average Transfer Rate: 1.70 MB/s)

Writting "User Area Partition" memory from 0x000001A00000 to 0x000001E7FFFF (Partition: "BOOTIMG")
Completed in 00:00:00.780 (Average Transfer Rate: 5.77 MB/s)

Writting "User Area Partition" memory from 0x000002000000 to 0x0000024FC7FF (Partition: "RECOVERY")
Completed in 00:00:00.905 (Average Transfer Rate: 5.51 MB/s)

Writting "User Area Partition" memory from 0x000002600000 to 0x000002620FFF (Partition: "SEC_RO")
Completed in 00:00:00.094 (Average Transfer Rate: 1.37 MB/s)

Writting "User Area Partition" memory from 0x0000026C0000 to 0x0000026F7BFF (Partition: "LOGO")
Completed in 00:00:00.156 (Average Transfer Rate: 1.40 MB/s)

Writting "User Area Partition" memory from 0x0000029C0000 to 0x0000029C01FF (Partition: "EBR2")
Completed in 00:00:00.016 (Average Transfer Rate: 31.31 kB/s)

Writting "User Area Partition" memory from 0x000003440000 to 0x000003C3FFFF (Partition: "SPDATA")
Completed in 00:00:01.108 (Average Transfer Rate: 7.22 MB/s)

Writting "User Area Partition" memory from 0x000003C40000 to 0x000043C3FFFF (Partition: "ANDROID")
ERROR: Failed due to multiple communication errors. Terminating at 0x00000BE40000

[Legija]

Make sure to use latest JTAG Manager and eMMC Plugin.


I'm not quite sure of what You think to achieve by flashing firmware, though.

[ravi mobile]

sir i need gionee p2s dll for isp work.

[Legija]

There is no need for ISP dll as this phone can be flashed even if eMMC is blank.


Download v1.85 JTAG Manager and v5.05 eMMC Plugin first.
Here is pkg file which will restore boot and mbr for P2S:


Please click "Check Memory" on USB tab and post log here, with this PKG selected.

[ravi mobile]

Here check memory log -

Connecting to the RIFF Box...OK
Firmware Version: 1.51 (RIFFBOX1), JTAG Manager Version: 1.85
Selected Package: [Gionee P2S V1.00 by <legija>]

Connecting to the Device via USB Interface...OK
Detected MediaTek Chip: MT6572, H/W Version: 0xCA01

Initializing Communication via MediaTek Download Agent Protocol...OK

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x01
Product Name ......................... "N5XZMB"
User Area Partition Size ............. 0x0000E9000000 Bytes (3.64 GB)
Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
Serial Number ........................ 0x75C679EF
Addressing Mode ...................... Physical

here Resurrectors log -

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.51 (RIFFBOX1), JTAG Manager Version: 1.85
Selected Package: [Gionee P2S V1.00 by <legija>]

Connecting to the Device via USB Interface...

Detected eMMC Chip, ID: 0x15/0x01 (N5XZMB), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Writting "Boot Area Partition 1" memory from 0x000000000000 to 0x000000018FFF (Partition: "PRELOADER")
Completed in 00:00:00.062 (Average Transfer Rate: 1.58 MB/s)

Writting "User Area Partition" memory from 0x000000880000 to 0x0000008801FF (Partition: "MBR")
Completed in 00:00:00.047 (Average Transfer Rate: 10.66 kB/s)

Writting "User Area Partition" memory from 0x000000900000 to 0x0000009001FF (Partition: "EBR1")
Completed in 00:00:00.032 (Average Transfer Rate: 15.66 kB/s)

Writting "User Area Partition" memory from 0x0000025A0000 to 0x0000025DCFFF (Partition: "UBOOT")
Completed in 00:00:00.093 (Average Transfer Rate: 2.56 MB/s)

Writting "User Area Partition" memory from 0x000002600000 to 0x000002A817FF (Partition: "BOOTIMG")
Completed in 00:00:00.655 (Average Transfer Rate: 6.88 MB/s)

Writting "User Area Partition" memory from 0x000002C00000 to 0x0000030FDFFF (Partition: "RECOVERY")
Completed in 00:00:00.702 (Average Transfer Rate: 7.11 MB/s)

Writting "User Area Partition" memory from 0x000003200000 to 0x000003220FFF (Partition: "SEC_RO")
Completed in 00:00:00.047 (Average Transfer Rate: 2.74 MB/s)

Writting "User Area Partition" memory from 0x0000032C0000 to 0x0000032F7BFF (Partition: "LOGO")
Completed in 00:00:00.078 (Average Transfer Rate: 2.79 MB/s)

Writting "User Area Partition" memory from 0x0000035C0000 to 0x0000035C01FF (Partition: "EBR2")
Completed in 00:00:00.016 (Average Transfer Rate: 31.31 kB/s)

Writting "User Area Partition" memory from 0x000004040000 to 0x00000483FFFF (Partition: "SPDATA")
Completed in 00:00:01.045 (Average Transfer Rate: 7.66 MB/s)

Writting "User Area Partition" memory from 0x000004840000 to 0x00004483FFFF (Partition: "ANDROID")
Completed in 00:02:23.302 (Average Transfer Rate: 7.15 MB/s)

Writting "User Area Partition" memory from 0x000044840000 to 0x00005C03FFFF (Partition: "CACHE")
Completed in 00:00:45.084 (Average Transfer Rate: 8.34 MB/s)

Writting "User Area Partition" memory from 0x00005C040000 to 0x00009BF3FFFF (Partition: "USRDATA")
Completed in 00:02:00.089 (Average Transfer Rate: 8.52 MB/s)

mobile still on logo stuck and sp flash tool cant full flash its stuck on 1%.

[Legija]

Addressing Mode ...................... Physical


This should not be case as this MCU uses liner address map.
Only possible in cases where emmc is bad.


Please click check memory, start emmc plugin and parse connected.
Need to see if there are partitions detected.

[ravi mobile]

Addressing Mode ...................... Physical


This should not be case as this MCU uses liner address map.
Only possible in cases where emmc is bad.


Please click check memory, start emmc plugin and parse connected.
Need to see if there are partitions detected.

Sorry Sir i returned mobile his owner.. without repair.