Blaupunkt Coburg SQR 49 Code needed

[mity7]

Hello all

Any news for me regarding the hidden code?

Thanks

[mity7]

Hello all

I read the Eprom of the radio car.

The result it was in Hexa:

06 20 BA 3A 00 00 00 00 00 00 00 00 00 ….

The code is hidden in those Hexa numbers?

Best regards

[RegWorts]

Without the right code this old radiocar is usless. Am I right?

Just a moment...



It looks as though this old model cannot be decoded from the Serial Number but has to be taken into a Radio Decoding Service in order to electronicall read the code memory chip (EEPROM)

[mity7]

Without the right code this old radiocar is usless. Am I right?

[mity7]

Hello

Thank you for help
I tried 6519 but without any succes.

Could be another code?

Best regards

[masterskay62]

Ok

BP8470X1753045

Hi.
Try...............6519

[mity7]

Thank you for help me.

[mity7]

Ok

BP8470X1753045

[RegWorts]

Hello to all!

There is anyone could help me to start a Radio car Blaupunkt Coburg SQR49?

Sn is 7 648 470 013

The device wants from me 4 digits.

Also post the Serial Number beginning with BPxxxxxxxxxxxx

[mity7]

Hello to all!

There is anyone could help me to start a Radio car Blaupunkt Coburg SQR49?

Sn is 7 648 470 013

The device wants from me 4 digits.

[nivafahrer]

See PM Message

Thanks a lot! WeŽll see

[RegWorts]

Many Thanks, but also CODE 7532 does not work.

Any other ideas how to get the Coburg SQR 49 work?

See PM Message

[nivafahrer]

Hi.
Try....7532

Many Thanks, but also CODE 7532 does not work.

Any other ideas how to get the Coburg SQR 49 work?

[masterskay62]

Many Thanks! Unfortunately also the second code does not work.

The procedure is as follows: switch on the radio; "----" is on the display; after one hour "Code" is on the display. Now you can enter a code once; after my newest try "----" appeared again.

Do you have any ideas what is wrong?

Hi.
Try....7532

[nivafahrer]

0333 should be correct

Try code 9709 once onle and report back

Many Thanks! Unfortunately also the second code does not work.

The procedure is as follows: switch on the radio; "----" is on the display; after one hour "Code" is on the display. Now you can enter a code once; after my newest try "----" appeared again.

Do you have any ideas what is wrong?