Blaupunkt Freiburg Radio Code

[GRock]

Well the procedure is as you write: "(Note: in some Freiburg model this procedure shown above is automatic when you turn-on radio)" so display show 0000 after turning on, but I entered code 7275, and 1275 as generators said but they are wrong.
Second thing is that after writing a code I pressed ">" but nothing happened, then I pressed "^" and display showed "WAIT 1 H". And now I don't know why it happened. I waited too long with a code or a "^" activated it?
Schouldn't be there a info like "Wrong Code", "Error" or something like that?

I've just found the C31 manual, no paragraph about code, it has the removable front panel only, so, this is a mistake...

[Error_Demon]

Well the procedure is as you write: "(Note: in some Freiburg model this procedure shown above is automatic when you turn-on radio)" so display show 0000 after turning on, but I entered code 7275, and 1275 as generators said but they are wrong.
Second thing is that after writing a code I pressed ">" but nothing happened, then I pressed "^" and display showed "WAIT 1 H". And now I don't know why it happened. I waited too long with a code or a "^" activated it?
Schouldn't be there a info like "Wrong Code", "Error" or something like that?

[GRock]

The numbers are correct. Radio after turning on shows text CODE then 0000. Iīve found a code 7275 but when I used it nothing happened and a few seconds later radio locked for 1h . So the code is incorrect or there is a method to press some button after writing a code but I really donīt know what to do after writing it? Just write and left, press menu? Or something else?

Some other Freiburg C?? model uses this method, try it...

Code Entry as follows:

Turn Off Stereo
Press And Hold "FM" and Preset " 1 "
Switch Radio On - Display Shows
" CODE "
Press Preset " 1 " and the display will show
" 0000 "

(Note: in some Freiburg model this procedure shown above is automatic when you turn-on radio)

Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit

If the correct code number is now shown
Press " >> " To Enter (universal for all Freiburg model)

Entry code is possible if display show " 0000 " only, otherwise is codelocked...

P.S. Since C31 results NO CODED, no entry procedure are reported, so I'm not so shure...

[Error_Demon]

The numbers are correct. Radio after turning on shows text CODE then 0000. Iīve found a code 7275 but when I used it nothing happened and a few seconds later radio locked for 1h . So the code is incorrect or there is a method to press some button after writing a code but I really donīt know what to do after writing it? Just write and left, press menu? Or something else?

[Error_Demon]

Well, maybe I made a mistake. I'll check serial and part number one more time then.

[GRock]

Hello,
My car radio has locked and the problem is I don't have a unlocking code so I need your help. Please if anyone can tell me what is a code to a radio, I would be really greatful .
The radio is:
Blaupunkt Freiburg C31
Serial: BP 1140 1 01 56158
Part: 7641140510

DATABASE reports NO CODED!!!

[Error_Demon]

Hello,
My car radio has locked and the problem is I don't have a unlocking code so I need your help. Please if anyone can tell me what is a code to a radio, I would be really greatful .
The radio is:
Blaupunkt Freiburg C31
Serial: BP 1140 1 01 56158
Part: 7641140510