N7100 Boot Repair Done

[skyvind]

Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1330 mV
CMD Active Level:1804 mV
Repair VTU00M eMMC:
Entering repair mode 2...
Success
Erasing repair area...
Success
Writing repair area...
Success
Exit repair mode 2...
<font color="green">Success</font>
<font color="green">EMMC repair Done , Reconect eMMC and check S.M.A.R.T Report.</font>
<font color="green">Please don't forget to repair <b>extCSD</b> from backup!!!</font>
<font color="green">Please don't forget to configure <b>BOOT</b> sizes!!!</font>
Running:SAMSUNG: Read S.M.A.R.T Report...
<br>
Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1330 mV
CMD Active Level:1804 mV
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Normal

Super Block size : 0x00800000 (8388608 bytes)
Super Page size : 0x00004000 (16384 bytes)
Optimal Write size : 0x00010000 (65536 bytes)
Read Reclaim count : 0
Optimal TRIM size : 0x00002000 (8192 bytes)
Total Number of banks : 4
Initial bad blocks per bank : 1,1,2,2
Runtime bad blocks per bank : 0,0,0,0
Reserved blocks left per bank : 50,50,49,49
All Erase counts (min,avg,max): 0,0,1
SLC Erase counts (min,avg,max): 0,0,1
MLC Erase counts (min,avg,max): 0,0,0
S.M.A.R.T Report Done !!!
Running:SAMSUNG: MoviNAND Reset + Format...
<br>
Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1330 mV
CMD Active Level:1804 mV
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!!!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!!!
Done.
<font color="red">Please don't forget to repair extCSD from backup!!!</font>
Running:Repair extCSD...
<br>
Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1330 mV
CMD Active Level:1804 mV
Writing...
Done!
Done.
<font color="red">Please don't forget to repair extCSD from backup!!!</font>
<br>
Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1330 mV
CMD Active Level:1804 mV
Writing 000000100000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Write Speed: 402 kB/s
Done !!!
<br>
Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1330 mV
CMD Active Level:1804 mV
Writing 000020000000 bytes to 00000000 ...ROM1 (USER ROM)
Write Speed: 2860 kB/s
Done !!!

[kiet_gocong]

thanks for share

[hajukhan]

thanks for report

[black_id_82]

Can you give about the screen shoot please,...???