Tweet
could successfully read user code of Samsung E1282T by Volcano here is the Manual and screen shot:
E1282T has SC6530 SPD CPU .
1_First go to detect tab of Volcano and connect with Volcano jag cable and select SPD in detect type and detect the phone and keep press Selection or Music button of the phone when pinout found install SPD drivers and set pinout.
2_Now go to SPD tab select SC6530 boot and 115200 baud rate
3_Reset Pinout and press selection button of the phone when pinout set tick on Read Flash when reading flash finish Volcano will give this Error and wont show to save the filebut file would have been saved in VOLCANO folder
4_Now tick on Unlock code and select read file and run 2 time and you will see your E1282T user code but dont forget to press RUN towice
Thanks VOLCANO Team and Special Thanks to Mr umesh gaba who helped me to unlock this phone for the first Time
E1282T has SC6530 SPD CPU .
1_First go to detect tab of Volcano and connect with Volcano jag cable and select SPD in detect type and detect the phone and keep press Selection or Music button of the phone when pinout found install SPD drivers and set pinout.
2_Now go to SPD tab select SC6530 boot and 115200 baud rate
3_Reset Pinout and press selection button of the phone when pinout set tick on Read Flash when reading flash finish Volcano will give this Error and wont show to save the filebut file would have been saved in VOLCANO folder
4_Now tick on Unlock code and select read file and run 2 time and you will see your E1282T user code but dont forget to press RUN towice
Thanks VOLCANO Team and Special Thanks to Mr umesh gaba who helped me to unlock this phone for the first Time