Octoplus JTAG Software v.1.8.7 is out!

[AKS.KADHAR]

Octoplus JTAG Software v.1.8.7 is out!

We have added Boot Repair via USB and small TP for LG VS930 and LG F160L
and via JTAG for TeXet TM-3200R, Crius Q7A and Huawei G520-0000!

Octoplus Box JTAG Software v.1.8.7 Release Notes

• Added support for the following models:

- LG VS930 - added Dead Boot Repair via USB
- LG F160L - added Dead Boot Repair via USB
- TeXet TM-3200R - Dead Boot/Device Repair via JTAG (thanks to mr. Drunya_L)
- Crius Q7A - Dead Boot / Device Repair via JTAG (thanks to mr. DZ_Developer)
- Huawei G520-0000 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG VS930 and LG F160L via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.7

Find out more at: www.octoplusbox.com