Medusa Box v.2.4.4 is out!
We have added boot repair via USB and small TP for:
LG D150, D157F, D160, D160F, D160G, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Also added repair via JTAG interface for:
Samsung SGH-T479B and ZTE V880G.
Medusa Box v.2.4.4 Release Notes:
- Added support for the following models:
- All pinouts and Repair procedures are described in the manual ("Help" button in Software).
To repair mentioned above devices via USB, please follow the next three steps:
Medusa - Ultimate Breakthrough in the Phone Repair!
Download Medusa Box v.2.4.4
We have added boot repair via USB and small TP for:
LG D150, D157F, D160, D160F, D160G, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Also added repair via JTAG interface for:
Samsung SGH-T479B and ZTE V880G.
Medusa Box v.2.4.4 Release Notes:
- Added support for the following models:
- LG D150 - added Dead Boot / Device Repair via USB
- LG D157F - added Dead Boot Repair via USB
- LG D160 - added Dead Boot / Device Repair via USB
- LG D160F - added Dead Boot Repair via USB
- LG D160G - added Dead Boot Repair via USB
- Samsung SGH-T479B - added Dead Boot/Device Repair
- ZTE V880G - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
- All pinouts and Repair procedures are described in the manual ("Help" button in Software).
To repair mentioned above devices via USB, please follow the next three steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!) - Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB - Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
Medusa - Ultimate Breakthrough in the Phone Repair!
Download Medusa Box v.2.4.4